Fuel injectors
  1. Home
  2. injection
  3. #1047458792

104745-8792 ZEXEL 9 460 613 530 BOSCH INJECTION-PUMP ASSEMBLY 9460613530 1047458792


 

Information injection-pump assembly

BOSCH 9 460 613 530 9460613530
ZEXEL 104745-8792 1047458792
104745-8792 INJECTION-PUMP ASSEMBLY
Rating:
20
Buy INJECTION-PUMP ASSEMBLY 104745-8792 zexel genuine, new aftermarket engine parts with delivery

Components :

0. INJECTION-PUMP ASSEMBLY 104745-8792
1. _
2. FUEL INJECTION PUMP 104645-8792
3. NUMBER PLATE 146987-1900
4. _ 479771-0520
5. CAPSULE
6. ADJUSTING DEVICE
7. NOZZLE AND HOLDER ASSY 105148-1560
8. Nozzle and Holder MD338904
9. Open Pre:MPa(Kqf/cm2) 14.7{150}
10. NOZZLE-HOLDER 105078-0181
11. NOZZLE 105007-1120

Scheme ###:

PACKING RING
1/6. [1] 146601-0700 PACKING RING
6. [1] 146100-0220 SUPPLY PUMP
9. [1] 146103-0100 COVER
10. [2] 139104-0000 FLAT-HEAD SCREW
12. [1] 146200-0320 DRIVE SHAFT
12/1. [1] 146200-0300 DRIVE SHAFT
12/2. [1] 146201-0000 WOODRUFF KEY
12/3. [2] 146202-0100 DAMPER
12/4. [1] 146203-0000 TOOTHED GEAR
17. [1] 146204-0000 PLAIN WASHER
20. [1] 146210-3520 ROLLER SET
24. [1] 146303-0100 BEARING PIN
25. [1] 146304-0000 BEARING PIN
26. [1] 146305-0000 CLAMPING BAND
27. [1] 146205-0000 SLOTTED WASHER
29. [1] 146220-2120 CAM PLATE
30. [1] 146600-0800 O-RING
31. [1] 146311-6520 PUMP PLUNGER
32. [1] 146301-0000 SLIDING PIECE
34. [1] 146312-2800 COMPRESSION SPRING
34B. [1] 146312-4300 COMPRESSION SPRING
34C. [1] 146312-2700 COMPRESSION SPRING
35/1. [1] 146690-3200 SHIM D11.5&9.4T0.1
35/1. [1] 146690-3300 SHIM D11.5&9.4T0.2
35/1. [1] 146690-3400 SHIM D11.5&9.4T0.25
35/1. [1] 146690-3500 SHIM D11.5&9.4T1.0
35/1. [1] 146690-4100 SHIM D11.5&9.4T2
35/1. [1] 146690-4200 SHIM D11.5&9.4T0.5
35/1. [1] 146690-4300 SHIM D11.5&9.4T0.75
36. [1] 146600-0800 O-RING
37. [1] 146310-4020 COVER
38. [2] 146620-5000 BLEEDER SCREW
39. [1] 146310-0100 COVER
40. [2] 146620-5000 BLEEDER SCREW
41. [1] 146312-1900 COMPRESSION SPRING
43. [1] 146230-0000 SHIM
44. [1] 146230-0100 PLAIN WASHER
45. [1] 146231-0001 SLOTTED WASHER
47. [2] 146233-0000 SLOTTED WASHER
48/1. [1] 146603-0000 SHIM D17.0&5.2T0.50
48/1. [1] 146603-0100 SHIM D17.0&5.2T0.80
48/1. [1] 146603-0200 SHIM D17.0&5.2T1.00
48/1. [1] 146603-0300 SHIM D17.0&5.2T1.20
48/1. [1] 146603-0400 SHIM D17.0&5.2T1.50
48/1. [1] 146603-0500 SHIM D17.0&5.2T1.80
48/1. [1] 146603-0600 SHIM D17.0&5.2T2.00
48/1. [1] 146690-1400 SHIM D17&5.2T0.9
48/1. [1] 146690-1500 SHIM D17&5.2T1.1
48/1. [1] 146690-1600 SHIM D17&5.2T1.3
48/1. [1] 146690-1700 SHIM D17&5.2T1.4
48/1. [1] 146690-1800 SHIM D17&5.2T1.6
48/1. [1] 146690-1900 SHIM D17&5.2T1.7
48/1. [1] 146690-5800 SHIM D17&5.2T2.1
48/1. [1] 146690-5900 SHIM D17&5.2T2.2
48/1. [1] 146690-6000 SHIM D17&5.2T2.3
48/1. [1] 146690-6100 SHIM D17&5.2T2.4
48/1. [1] 146690-6200 SHIM D17&5.2T2.5
48/1. [1] 146690-6300 SHIM D17&5.2T2.6
48/1. [1] 146690-6400 SHIM D17&5.2T2.7
48/1. [1] 146690-6500 SHIM D17&5.2T2.8
48/1. [1] 146690-6600 SHIM D17&5.2T2.9
48/1. [1] 146690-6700 SHIM D17&5.2T3.0
48/1. [1] 146690-6800 SHIM D17&5.2T3.1
48/1. [1] 146690-6900 SHIM D17&5.2T3.2
48/1. [1] 146690-7000 SHIM D17&5.2T3.3
48/1. [1] 146690-7100 SHIM D17&5.2T3.4
48/1. [1] 146690-7200 SHIM D17&5.2T0.4
48/1. [1] 146690-7300 SHIM D17&5.2T0.6
48/1. [1] 146690-7400 SHIM D17&5.2T0.7
48/1. [1] 146690-7500 SHIM D17&5.2T1.9
48/1. [1] 146690-7800 SHIM D17&5.2T0.2
49. [2] 146234-0500 GUIDE PIN
50. [1] 146401-0221 HYDRAULIC HEAD
50. [1] 146401-0221 HYDRAULIC HEAD
50. [1] 146401-0221 HYDRAULIC HEAD
51. [1] 146600-0000 O-RING
52/1. [1] 146420-0000 SHIM D9.5&3.0T1.90
52/1. [1] 146420-0100 SHIM D9.5&3.0T1.92
52/1. [1] 146420-0200 SHIM D9.5&3.0T1.94
52/1. [1] 146420-0300 SHIM D9.5&3.0T1.96
52/1. [1] 146420-0400 SHIM D9.5&3.0T1.98
52/1. [1] 146420-0500 SHIM D9.5&3.0T2.00
52/1. [1] 146420-0600 SHIM D9.5&3.0T2.02
52/1. [1] 146420-0700 SHIM D9.5&3.0T2.04
52/1. [1] 146420-0800 SHIM D9.5&3.0T2.06
52/1. [1] 146420-0900 SHIM D9.5&3.0T2.08
52/1. [1] 146420-1000 SHIM D9.5&3.0T2.10
52/1. [1] 146420-1100 SHIM D9.5&3.0T2.12
52/1. [1] 146420-1200 SHIM D9.5&3.0T2.14
52/1. [1] 146420-1300 SHIM D9.5&3.0T2.16
52/1. [1] 146420-1400 SHIM D9.5&3.0T2.18
52/1. [1] 146420-1500 SHIM D9.5&3.0T2.20
52/1. [1] 146420-1600 SHIM D9.5&3.0T2.22
52/1. [1] 146420-1700 SHIM D9.5&3.0T2.24
52/1. [1] 146420-1800 SHIM D9.5&3.0T2.26
52/1. [1] 146420-1900 SHIM D9.5&3.0T2.28
52/1. [1] 146420-2000 SHIM D9.5&3.0T2.30
52/1. [1] 146420-2100 SHIM D9.5&3.0T2.32
52/1. [1] 146420-2200 SHIM D9.5&3.0T2.34
52/1. [1] 146420-2300 SHIM D9.5&3.0T2.36
52/1. [1] 146420-2400 SHIM D9.5&3.0T2.38
52/1. [1] 146420-2500 SHIM D9.5&3.0T2.40
52/1. [1] 146420-2600 SHIM D9.5&3.0T2.42
52/1. [1] 146420-2700 SHIM D9.5&3.0T2.44
52/1. [1] 146420-2800 SHIM D9.5&3.0T2.46
52/1. [1] 146420-2900 SHIM D9.5&3.0T2.48
52/1. [1] 146420-3000 SHIM D9.5&3.0T2.50
52/1. [1] 146420-3100 SHIM D9.5&3.0T2.52
52/1. [1] 146420-3200 SHIM D9.5&3.0T2.54
52/1. [1] 146420-3300 SHIM D9.5&3.0T2.56
52/1. [1] 146420-3400 SHIM D9.5&3.0T2.58
52/1. [1] 146420-3500 SHIM D9.5&3.0T2.60
52/1. [1] 146420-3600 SHIM D9.5&3.0T2.62
52/1. [1] 146420-3700 SHIM D9.5&3.0T2.64
52/1. [1] 146420-3800 SHIM D9.5&3.0T2.66
52/1. [1] 146420-3900 SHIM D9.5&3.0T2.68
52/1. [1] 146420-4000 SHIM D9.5&3.0T2.70
52/1. [1] 146420-4100 SHIM D9.5&3.0T2.72
52/1. [1] 146420-4200 SHIM D9.5&3.0T2.74
52/1. [1] 146420-4300 SHIM D9.5&3.0T2.76
52/1. [1] 146420-4400 SHIM D9.5&3.0T2.78
52/1. [1] 146420-4500 SHIM D9.5&3.0T2.80
52/1. [1] 146420-4600 SHIM D9.5&3.0T2.82
52/1. [1] 146420-4700 SHIM D9.5&3.0T2.84
52/1. [1] 146420-4800 SHIM D9.5&3.0T2.86
52/1. [1] 146420-4900 SHIM D9.5&3.0T2.88
52/1. [1] 146420-5000 SHIM D9.5&3.0T2.90
52/1. [1] 146420-5100 SHIM D9.5&3.0T1.74
52/1. [1] 146420-5200 SHIM D9.5&3.0T1.76
52/1. [1] 146420-5300 SHIM D9.5&3.0T1.78
52/1. [1] 146420-5400 SHIM D9.5&3.0T1.80
52/1. [1] 146420-5500 SHIM D9.5&3.0T1.82
52/1. [1] 146420-5600 SHIM D9.5&3.0T1.84
52/1. [1] 146420-5700 SHIM D9.5&3.0T1.86
52/1. [1] 146420-5800 SHIM D9.5&3.0T1.88
54. [4] 146433-0100 GASKET D12&6.4T1.00
55. [4] 146430-0320 DELIVERY-VALVE ASSEMBLY
56. [4] 146432-0000 COMPRESSION SPRING
58. [4] 146440-0320 FITTING
60. [3] 139106-0100 FLAT-HEAD SCREW
66. [1] 146600-0100 O-RING
67. [1] 146504-1521 GOVERNOR COVER
67/1. [1] 146806-3820 GOVERNOR COVER
67/14. [1] 146621-1700 UNION NUT
67/16. [1] 146526-2800 BLEEDER SCREW
67/23. [1] 146930-3620 BRACKET
67/24. [2] 010206-1440 HEX-SOCKET-HEAD CAP SCREW M6P1L14
67/64. [1] 146931-3320 BRACKET
67/78. [1] 146600-4400 SEAL RING
67/105. [1] 139006-4400 BLEEDER SCREW
67/108. [1] 146931-5220 BRACKET
67/109. [1] 139006-4400 BLEEDER SCREW
67/200. [1] 139308-0300 PLAIN WASHER
67/201. [1] 146545-3400 THREADED PIN L53.00
67/201B. [1] 146545-3500 THREADED PIN L55.00
67/201C. [1] 146545-3600 THREADED PIN L57.00
67/202. [1] 139208-0900 UNION NUT
67/203. [1] 146600-1200 O-RING
68. [1] 146514-7920 CONTROL SHAFT
69. [1] 139310-0200 PLAIN WASHER
72. [1] 146830-7620 CONTROL LEVER
72B. [1] 146830-7720 CONTROL LEVER
73. [1] 014110-6440 LOCKING WASHER
75. [1] 013020-6040 UNION NUT M6P1H5
95. [1] 146851-3520 FULCRUM LEVER
104. [2] 146568-0000 SLOTTED SPRING PIN
105. [2] 026508-1140 GASKET D11.4&8.2T1
106. [2] 146588-0500 COILED SPRING
107. [1] 146569-0300 UNION NUT
108. [1] 146570-0100 GOVERNOR SHAFT
109. [1] 146600-0400 O-RING
110/1. [1] 146571-0000 SHIM D20.2&8.3T1.05
110/1. [1] 146571-0100 SHIM D20.2&8.3T1.25
110/1. [1] 146571-0200 SHIM D20.2&8.3T1.45
110/1. [1] 146571-0300 SHIM D20.2&8.3T1.65
110/1. [1] 146571-0400 SHIM D20.2&8.3T1.85
110/1. [1] 146571-0500 SHIM D20.2&8.3T1.15
110/1. [1] 146571-0600 SHIM D20.2&8.3T1.35
110/1. [1] 146571-0700 SHIM D20.2&8.3T1.55
110/1. [1] 146571-0800 SHIM D20.2&8.3T1.75
111. [1] 146602-0600 PLAIN WASHER D20&8.4T1.40
112. [1] 146572-0020 FLYWEIGHT ASSEMBLY
114. [1] 146602-0500 PLAIN WASHER D17&6.4T1.60
115. [1] 146975-2700 SLIDING SLEEVE
116. [1] 146576-0000 SEALING CAP
117/1. [1] 146577-1800 PLUG L2.10
117/1. [1] 146577-1900 PLUG L2.30
117/1. [1] 146577-2000 PLUG L2.50
117/1. [1] 146577-2100 PLUG L2.70
117/1. [1] 146577-2200 PLUG L2.90
117/1. [1] 146577-2300 PLUG L3.10
117/1. [1] 146577-2400 PLUG L3.30
117/1. [1] 146577-2500 PLUG L3.50
117/1. [1] 146577-2600 PLUG L3.70
117/1. [1] 146577-2700 PLUG L3.90
117/1. [1] 146577-2800 PLUG L4.10
117/1. [1] 146577-2900 PLUG L4.30
117/1. [1] 146577-3000 PLUG L4.50
117/1. [1] 146577-3100 PLUG L4.70
117/1. [1] 146577-3200 PLUG L4.90
117/1. [1] 146577-3300 PLUG L5.10
117/1. [1] 146577-6700 PLUG L2.2
117/1. [1] 146577-6800 PLUG L2.4
117/1. [1] 146577-6900 PLUG L2.6
117/1. [1] 146577-7000 PLUG L2.8
117/1. [1] 146577-7100 PLUG L3.0
117/1. [1] 146577-7200 PLUG L3.2
117/1. [1] 146577-7300 PLUG L3.4
117/1. [1] 146577-7400 PLUG L3.6
117/1. [1] 146577-7500 PLUG L3.8
117/1. [1] 146577-7600 PLUG L4.0
117/1. [1] 146577-7700 PLUG L4.2
117/1. [1] 146577-7800 PLUG L4.4
117/1. [1] 146577-7900 PLUG L4.6
117/1. [1] 146577-8000 PLUG L4.8
117/1. [1] 146577-8100 PLUG L5.0
117/1. [1] 146877-0000 PLUG L5.2
117/1. [1] 146877-0100 PLUG L5.3
117/1. [1] 146877-0200 PLUG L5.4
117/1. [1] 146877-0300 PLUG L5.5
117/1. [1] 146877-4700 PLUG
117/1. [1] 146877-4800 PLUG
117/1. [1] 146877-4900 PLUG
117/1. [1] 146877-5000 PLUG
123. [3] 139106-0200 FLAT-HEAD SCREW
124. [1] 010206-4540 HEX-SOCKET-HEAD CAP SCREW
130. [1] 146421-0020 CAPSULE
130/2. [1] 026508-1140 GASKET D11.4&8.2T1
130/3. [1] 146422-0000 BLEEDER SCREW
130/4. [1] 146600-0500 O-RING
133. [1] 146600-0600 O-RING
134. [1] 146600-0700 O-RING
135. [1] 146110-0220 CONTROL VALVE
135/5. [1] 146114-0000 SPRING WASHER
136. [1] 146650-3920 PULLING ELECTROMAGNET
137. [2] 139514-0200 GASKET
145. [1] 146621-4901 UNION NUT
147. [1] 146600-5000 O-RING
200. [1] 146206-0100 COILED SPRING
205. [1] 029470-4030 WOODRUFF KEY
217. [1] 146542-5300 SLOTTED WASHER
218. [1] 146592-2500 COILED SPRING
219. [1] 146541-3000 BUSHING
220. [1] 146592-2600 COILED SPRING
224. [1] 139006-4700 BLEEDER SCREW
229. [1] 146928-3920 BRACKET
230. [1] 146629-2120 BRACKET
231. [1] 139006-4600 BLEEDER SCREW
232. [1] 146931-3200 BRACKET
233. [1] 146658-9020 WIRE
234. [1] 139006-4800 BLEEDER SCREW
235. [1] 146659-0600 CLAMPING BAND
237. [1] 146620-0200 HEX-SOCKET-HEAD CAP SCREW
240. [1] 146650-1220 PULLING ELECTROMAGNET
240/8. [1] 146600-1700 O-RING
243. [1] 146621-4901 UNION NUT
245. [3] 139512-0500 GASKET
246. [1] 146125-0600 EYE BOLT
247. [1] 146669-5520 INLET UNION
247. [1] 146669-5520 INLET UNION
248. [1] 146649-7400 SPACER BUSHING
253. [1] 139006-4500 BLEEDER SCREW
275. [1] 146612-4800 BRACKET
276. [2] 010010-1640 BLEEDER SCREW M10P1.5L16 4T
280. [1] 146361-7020 START ADVANCE ASSY
281. [1] 146600-0800 O-RING
282. [2] 010206-1240 HEX-SOCKET-HEAD CAP SCREW M6P1L12
286. [1] 020106-3040 BLEEDER SCREW
287. [1] 014010-6140 PLAIN WASHER D13&6.5T1
310. [1] 146685-3121 POTENTCIOMETER
310/3. [2] 139104-0400 FLAT-HEAD SCREW
310/4. [1] 146648-2900 JOINT CONNECTION
310/4B. [1] 146648-3000 JOINT CONNECTION
310/4C. [1] 146648-3100 JOINT CONNECTION
310/4D. [1] 146648-3200 JOINT CONNECTION
310/4E. [1] 146648-3300 JOINT CONNECTION
310/4F. [1] 146648-4700 JOINT CONNECTION
310/4G. [1] 146648-5300 JOINT CONNECTION
310/4H. [1] 146649-1700 JOINT CONNECTION
310/5. [1] 146661-0601 BOOT
800S. [1] 146018-8920 PUMP HOUSING
800S/1/6. [1] 146601-0700 PACKING RING
804S. [1] 146232-0320 COMPRESSION SPRING
805S. [1] 146574-0120 PARTS SET
810S. [1] 146600-1120 REPAIR SET
821S. [1] 146210-5720 ROLLER SET
835S. [1] 146598-1000 CAP
836S/1. [1] 146598-0600 CAP L18
836S/1. [1] 146598-0700 CAP L21
836S/1. [1] 146598-0800 CAP L24
836S/1. [1] 146598-0900 CAP L27
903. [1] 479771-0520 PULSE GENERATOR
906. [1] 146987-1900 NAMEPLATE
910S. [1] 146600-4320 PARTS SET
910S. [1] 146600-4320 PARTS SET
911S. [1] 479771-0520 PULSE GENERATOR
912S. [1] 026508-1140 GASKET D11.4&8.2T1
913S. [1] 146422-0000 BLEEDER SCREW
914S. [1] 146699-0020 VALVE SET
914S. [1] 146699-0020 VALVE SET
914S. [1] 146699-0020 VALVE SET
915S. [1] 146658-9020 WIRE
916S. [1] 025804-1610 WOODRUFF KEY
917S. [1] 146685-3110 POTENTCIOMETER

Include in #2:

104745-8792 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 460 613 530 9460613530
ZEXEL 104745-8792 1047458792


Zexel num
Bosch num
Firm num
Name
104745-8792 
104745-8793 
9 460 613 530 
   
INJECTION-PUMP ASSEMBLY
* K 11CJ VE4 VE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113orSAEJ967d
Test oil temperature degC   45 45 50
Nozzle   105780-0060
Bosch type code   NP-DN0SD1510
Nozzle holder   105780-2150
Opening pressure MPa   13 13 13.3
Opening pressure kgf/cm2   133 133 136
Injection pipe   157805-7320
Injection pipe
Inside diameter - outside diameter - length (mm) mm   2-6-450
Joint assembly   157641-4720
Tube assembly   157641-4020
Transfer pump pressure kPa   20 20 20
Transfer pump pressure kgf/cm2   0.2 0.2 0.2
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Pump speed r/min   1250 1250 1250
Average injection quantity mm3/st.   40.1 39.6 40.6
Difference in delivery mm3/st.   3.5
Basic   *
Oil temperature degC   50 48 52
Injection timing adjustment_02
Pump speed r/min   600 600 600
Average injection quantity mm3/st.   40.5 38.5 42.5
Oil temperature degC   50 48 52
Injection timing adjustment_03
Pump speed r/min   1250 1250 1250
Average injection quantity mm3/st.   40.1 39.1 41.1
Difference in delivery mm3/st.   4
Basic   *
Oil temperature degC   50 48 52
Injection timing adjustment_04
Pump speed r/min   1750 1750 1750
Average injection quantity mm3/st.   39.7 37.7 41.7
Oil temperature degC   50 48 52
Injection timing adjustment_05
Pump speed r/min   2100 2100 2100
Average injection quantity mm3/st.   41.1 39 43.2
Oil temperature degC   52 50 54
Injection quantity adjustment
Pump speed r/min   2550 2550 2550
Average injection quantity mm3/st.   19.5 16.5 22.5
Difference in delivery mm3/st.   6
Basic   *
Oil temperature degC   55 52 58
Injection quantity adjustment_02
Pump speed r/min   2550 2550 2550
Average injection quantity mm3/st.   19.5 14.5 24.5
Difference in delivery mm3/st.   6.5
Basic   *
Oil temperature degC   55 52 58
Injection quantity adjustment_03
Pump speed r/min   2900 2900 2900
Average injection quantity mm3/st.   5
Oil temperature degC   55 52 58
Governor adjustment
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   12.5 11 14
Difference in delivery mm3/st.   2
Basic   *
Oil temperature degC   48 46 50
Governor adjustment_02
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   12.5 10.5 14.5
Difference in delivery mm3/st.   2.5
Basic   *
Oil temperature degC   48 46 50
Governor adjustment_03
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   3
Oil temperature degC   50 48 52
Timer adjustment
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   75 65 85
Oil temperature degC   48 46 50
Remarks
IDLE  
Timer adjustment_02
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   75 65 85
Oil temperature degC   48 46 50
Remarks
IDLE  
Speed control lever angle
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   0 0 0
Oil temperature degC   48 46 50
Remarks
Magnet OFF at idling position  
0000000901
Pump speed r/min   1250 1250 1250
Overflow quantity with S/T ON cm3/min   420 290 550
Oil temperature degC   50 48 52
Stop lever angle
Pump speed r/min   1250 1250 1250
Pressure with S/T ON kPa   471 442 500
Pressure with S/T ON kgf/cm2   4.8 4.5 5.1
Pressure with S/T OFF kPa   363 324 402
Pressure with S/T OFF kgf/cm2   3.7 3.3 4.1
Basic   *
Oil temperature degC   50 48 52
Remarks
ON  
0000001101
Pump speed r/min   1250 1250 1250
Timer stroke with S/T ON mm   4.7 4.5 4.9
Timer stroke with S/T OFF mm   2.7 2.3 3.1
Basic   *
Oil temperature degC   50 48 52
Remarks
ON  
_02
Pump speed r/min   500 500 500
Timer stroke with S/T ON mm   1.5 0.9 2.1
Oil temperature degC   48 46 50
_03
Pump speed r/min   750 750 750
Timer stroke with S/T ON mm   2.6 2 3.2
Oil temperature degC   50 48 52
_04
Pump speed r/min   1250 1250 1250
Timer stroke with S/T ON mm   4.7 4.3 5.1
Timer stroke with S/T OFF mm   2.6 2 3.2
Basic   *
Oil temperature degC   50 48 52
Remarks
ON  
_05
Pump speed r/min   1750 1750 1750
Timer stroke with S/T ON mm   7 6.4 7.6
Timer stroke with S/T OFF mm   4.9 4.3 5.5
Oil temperature degC   50 48 52
_06
Pump speed r/min   2100 2100 2100
Timer stroke with S/T ON mm   8.6 8 9.2
Oil temperature degC   52 50 54
0000001201
Max. applied voltage V   8 8 8
Test voltage V   13 12 14
Timing setting
K dimension mm   3.3 3.2 3.4
KF dimension mm   5.8 5.7 5.9
MS dimension mm   1.3 1.2 1.4
Control lever angle alpha deg.   55 51 59
Control lever angle beta deg.   41 36 46

Test data Ex:

0000001801 POTENTIOMETER ADJUSTMENT

Test data 104745-8792
C:Position of the control lever N:Pump speed (r/min) V:Output voltage (V) Q:Injection quantity (mm3/st) A:Adjusting point B:Checking point C1:Idling C2:Full speed Vi:Applied voltage input
----------

----------
V1=1.8+-0.03V V2=8.63+-1.1V Vi=10V

0000001901 W-CSD ADJUSTMENT

Test data 104745-8792
Adjustment of the W-CSD 1. Adjustment of the advance angle of the timer (1)Determine the timer advance angle using the following graph. (2)(1) Adjust with the screw so that the timer advance angle determined in the item (1) is obtained. (B) = timer stroke ; (C) X = temperature t (deg C) Y = timer stroke: TA (mm)
----------

----------
(C);TA=-0.035t+1.7(-20degC<=t<=20degC) TA=-0.045t+2.0(20degC<=t)

0000002001 W-FICD LEVER ADJUSTMENT

Test data 104745-8792
2. Adjustment of the W-FICD (1)Insert a block gauge L mm determined from the graph below between the control lever (D) and the idle set screw (C). (2)Fix the bolt (F) at the position where the W-FICD lever (E) and the control lever (D) make contact. T:Tightening torque (3)After adjusting the W-FICD lever (E), confirm that the timer stroke is the stroke value s mm adjusted in item 1. Remove the shim after completing of adjustment. X:Temperature t (deg C) Y:Control lever: L (mm) (G): Control lever: L (mm) L = -0.21 t + 6.8 (-20 deg C <= t)
----------
L=L+-0.05mm s=12.3+-1mm T=3.4~4.9Nm(0.35~0.5kgfm)
----------
L=L+-0.05mm s=12.3+-1mm T=3.4~4.9Nm(0.35~0.5kgfm) SW=SW8




Information:

Charging System
5P300 Electrical Tester. Make reference to Special Instruction Form No. GEG02276, and to the instructions inside of the cover of the tester, when testing with the 5P300 Electrical Tester.The condition of charge in the battery at each regular inspection will show if the charging system operates correctly. An adjustment is necessary when the battery is constantly in a low condition of charge or a large amount of water is needed (more than one ounce of water per cell per week or per every 50 service hours).Make a test of the charging unit and voltage regulator on the engine, when possible, using wiring and components that are a permanent part of the system. Off-engine (bench) testing will give a test of the charging unit and voltage regulator operation. This testing will give an indication of needed repair. After repairs are made, again make a test to give proof that the units are repaired to their original condition of operation.Before the start of on-engine testing, the charging system and battery must be checked as shown in the Steps that follow:1. Battery must be at least 75% (1.240 Sp. Gr.) fully charged and held tightly in place. The battery holder must not put too much stress on the battery.2. Cables between the battery, starter and engine ground must be the correct size. Wires and cables must be free of corrosion and have cable support clamps to prevent stress on battery connections (terminals).3. Leads, junctions, switches and panel instruments that have direct relation to the charging circuit must give correct circuit control.4. Inspect the drive components for the charging unit to be sure they are free of grease and oil and have the ability to operate the charging unit.Alternator Regulator Adjustment
When an alternator is charging the battery too much or not enough, an adjustment can be made to the charging rate of the alternator.To make an adjustment to the voltage output on these alternators, remove the voltage adjustment cap (1) from the alternator, turn the cap 90°, and install it again into the alternator. The voltage adjustment cap has four positions: HI, LO, and two positions between the high and the low setting.
ALTERNATOR REGULATOR ADJUSTMENT
1. Voltage adjustment cap.Delco-Remy Alternator; Pulley Nut Tightening
Tighten nut that holds the pulley to a torque of 75 5 lb. ft. (100 7 N m) with the tools shown.
ALTERNATOR PULLEY INSTALLATION
1. 8S1588 Adapter (1/2" female to 3/8" male). 2. 8S1590 Socket (5/16" with 3/8" drive). 3. 1P2977 Tool Group. 8H8555 Socket (15/16" with 1/2" drive) not shown.Starting System
5P300 Electrical Tester. Make reference to Special Instruction Form No. GEG02276, and to the instructions inside of the cover of the tester, when the 5P300 Electrical Tester is used.Use a D.C. Voltmeter to find starting system components which do not function.Move the start control switch to activate the starter solenoid. Starter solenoid operation can be heard as the pinion of the starter motor is engaged with the ring gear on the engine flywheel.If the solenoid for the starter

Have questions with 104745-8792?





Group cross 104745-8792 ZEXEL

104745-8790  

104745-8791 
9 460 613 246 
 
INJECTION-PUMP ASSEMBLY
104745-8791  

104745-8792 
9 460 613 247 
 
INJECTION-PUMP ASSEMBLY
104745-8792  

104745-8793 
9 460 613 530 
 
INJECTION-PUMP ASSEMBLY
104745-8793  

104745-8794 
9 460 613 874 
 
INJECTION-PUMP ASSEMBLY
4D56

Mitsubishi 

104745-8794  
9 460 614 550 
MD351421 
INJECTION-PUMP ASSEMBLY
4D56
Back to top