104741-8131 ZEXEL F 01G 09W 0FX BOSCH INJECTION-PUMP ASSEMBLY f01g09w0fx 1047418131 32a6510410

Information Cross number Calibration Data Calibration Data Ex

Information injection-pump assembly

BOSCH F 01G 09W 0FX f01g09w0fx

ZEXEL 104741-8131 1047418131

MITSUBISHI-HEAV 32A6510410 32a6510410

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 104741-8131 zexel genuine, new aftermarket engine parts with delivery

Components :

0.	INJECTION-PUMP ASSEMBLY	104741-8131
1.	_
2.	FUEL INJECTION PUMP
3.	NUMBER PLATE
4.	_
5.	CAPSULE
6.	ADJUSTING DEVICE
7.	NOZZLE AND HOLDER ASSY
8.	Nozzle and Holder
9.	Open Pre:MPa(Kqf/cm2)
10.	NOZZLE-HOLDER
11.	NOZZLE

Scheme ###:

1/6.	[1]	146601-0900	PACKING RING
6.	[1]	146100-0420	SUPPLY PUMP
9.	[1]	146103-0100	COVER
10.	[2]	139104-0000	FLAT-HEAD SCREW
12.	[1]	146200-0020	DRIVE SHAFT
12/1.	[1]	146200-0000	DRIVE SHAFT
12/2.	[1]	146201-0000	WOODRUFF KEY
12/3.	[2]	146202-0100	DAMPER
12/4.	[1]	146203-0000	TOOTHED GEAR
17.	[1]	146204-0000	PLAIN WASHER
20.	[1]	146210-2320	ROLLER SET
24.	[1]	146303-0000	BEARING PIN
25.	[1]	146304-0000	BEARING PIN
26.	[1]	146305-0000	CLAMPING BAND
27.	[1]	146205-0000	SLOTTED WASHER
29.	[1]	146220-4820	CAM PLATE
30.	[1]	146600-0800	O-RING
31.	[1]	146311-8920	PUMP PLUNGER
32.	[1]	146301-0000	SLIDING PIECE
34.	[1]	146312-6700	COMPRESSION SPRING
34B.	[1]	146312-6800	COMPRESSION SPRING
34C.	[1]	146312-6900	COMPRESSION SPRING
35/1.	[1]	146690-3200	SHIM D11.5&9.4T0.1
35/1.	[1]	146690-3300	SHIM D11.5&9.4T0.2
35/1.	[1]	146690-3400	SHIM D11.5&9.4T0.25
35/1.	[1]	146690-3500	SHIM D11.5&9.4T1.0
35/1.	[1]	146690-4100	SHIM D11.5&9.4T2
35/1.	[1]	146690-4200	SHIM D11.5&9.4T0.5
35/1.	[1]	146690-4300	SHIM D11.5&9.4T0.75
36.	[1]	146600-0800	O-RING
37.	[1]	146310-4020	COVER
38.	[2]	146620-5000	BLEEDER SCREW
39.	[1]	146310-0100	COVER
40.	[2]	146620-5000	BLEEDER SCREW
41.	[1]	146312-1900	COMPRESSION SPRING
43.	[1]	146230-0000	SHIM
44.	[1]	146230-0100	PLAIN WASHER
45.	[1]	146231-0001	SLOTTED WASHER
47.	[2]	146233-0000	SLOTTED WASHER
48/1.	[1]	146603-0000	SHIM D17.0&5.2T0.50
48/1.	[1]	146603-0100	SHIM D17.0&5.2T0.80
48/1.	[1]	146603-0200	SHIM D17.0&5.2T1.00
48/1.	[1]	146603-0300	SHIM D17.0&5.2T1.20
48/1.	[1]	146603-0400	SHIM D17.0&5.2T1.50
48/1.	[1]	146603-0500	SHIM D17.0&5.2T1.80
48/1.	[1]	146603-0600	SHIM D17.0&5.2T2.00
48/1.	[1]	146690-1400	SHIM D17&5.2T0.9
48/1.	[1]	146690-1500	SHIM D17&5.2T1.1
48/1.	[1]	146690-1600	SHIM D17&5.2T1.3
48/1.	[1]	146690-1700	SHIM D17&5.2T1.4
48/1.	[1]	146690-1800	SHIM D17&5.2T1.6
48/1.	[1]	146690-1900	SHIM D17&5.2T1.7
48/1.	[1]	146690-5800	SHIM D17&5.2T2.1
48/1.	[1]	146690-5900	SHIM D17&5.2T2.2
48/1.	[1]	146690-6000	SHIM D17&5.2T2.3
48/1.	[1]	146690-6100	SHIM D17&5.2T2.4
48/1.	[1]	146690-6200	SHIM D17&5.2T2.5
48/1.	[1]	146690-6300	SHIM D17&5.2T2.6
48/1.	[1]	146690-6400	SHIM D17&5.2T2.7
48/1.	[1]	146690-6500	SHIM D17&5.2T2.8
48/1.	[1]	146690-6600	SHIM D17&5.2T2.9
48/1.	[1]	146690-6700	SHIM D17&5.2T3.0
48/1.	[1]	146690-6800	SHIM D17&5.2T3.1
48/1.	[1]	146690-6900	SHIM D17&5.2T3.2
48/1.	[1]	146690-7000	SHIM D17&5.2T3.3
48/1.	[1]	146690-7100	SHIM D17&5.2T3.4
48/1.	[1]	146690-7200	SHIM D17&5.2T0.4
48/1.	[1]	146690-7300	SHIM D17&5.2T0.6
48/1.	[1]	146690-7400	SHIM D17&5.2T0.7
48/1.	[1]	146690-7500	SHIM D17&5.2T1.9
48/1.	[1]	146690-7800	SHIM D17&5.2T0.2
49.	[2]	146234-0600	GUIDE PIN
50.	[1]	146401-4220	HYDRAULIC HEAD
50.	[1]	146401-4220	HYDRAULIC HEAD
50.	[1]	146401-4220	HYDRAULIC HEAD
51.	[1]	146600-0000	O-RING
52/1.	[1]	146420-0000	SHIM D9.5&3.0T1.90
52/1.	[1]	146420-0100	SHIM D9.5&3.0T1.92
52/1.	[1]	146420-0200	SHIM D9.5&3.0T1.94
52/1.	[1]	146420-0300	SHIM D9.5&3.0T1.96
52/1.	[1]	146420-0400	SHIM D9.5&3.0T1.98
52/1.	[1]	146420-0500	SHIM D9.5&3.0T2.00
52/1.	[1]	146420-0600	SHIM D9.5&3.0T2.02
52/1.	[1]	146420-0700	SHIM D9.5&3.0T2.04
52/1.	[1]	146420-0800	SHIM D9.5&3.0T2.06
52/1.	[1]	146420-0900	SHIM D9.5&3.0T2.08
52/1.	[1]	146420-1000	SHIM D9.5&3.0T2.10
52/1.	[1]	146420-1100	SHIM D9.5&3.0T2.12
52/1.	[1]	146420-1200	SHIM D9.5&3.0T2.14
52/1.	[1]	146420-1300	SHIM D9.5&3.0T2.16
52/1.	[1]	146420-1400	SHIM D9.5&3.0T2.18
52/1.	[1]	146420-1500	SHIM D9.5&3.0T2.20
52/1.	[1]	146420-1600	SHIM D9.5&3.0T2.22
52/1.	[1]	146420-1700	SHIM D9.5&3.0T2.24
52/1.	[1]	146420-1800	SHIM D9.5&3.0T2.26
52/1.	[1]	146420-1900	SHIM D9.5&3.0T2.28
52/1.	[1]	146420-2000	SHIM D9.5&3.0T2.30
52/1.	[1]	146420-2100	SHIM D9.5&3.0T2.32
52/1.	[1]	146420-2200	SHIM D9.5&3.0T2.34
52/1.	[1]	146420-2300	SHIM D9.5&3.0T2.36
52/1.	[1]	146420-2400	SHIM D9.5&3.0T2.38
52/1.	[1]	146420-2500	SHIM D9.5&3.0T2.40
52/1.	[1]	146420-2600	SHIM D9.5&3.0T2.42
52/1.	[1]	146420-2700	SHIM D9.5&3.0T2.44
52/1.	[1]	146420-2800	SHIM D9.5&3.0T2.46
52/1.	[1]	146420-2900	SHIM D9.5&3.0T2.48
52/1.	[1]	146420-3000	SHIM D9.5&3.0T2.50
52/1.	[1]	146420-3100	SHIM D9.5&3.0T2.52
52/1.	[1]	146420-3200	SHIM D9.5&3.0T2.54
52/1.	[1]	146420-3300	SHIM D9.5&3.0T2.56
52/1.	[1]	146420-3400	SHIM D9.5&3.0T2.58
52/1.	[1]	146420-3500	SHIM D9.5&3.0T2.60
52/1.	[1]	146420-3600	SHIM D9.5&3.0T2.62
52/1.	[1]	146420-3700	SHIM D9.5&3.0T2.64
52/1.	[1]	146420-3800	SHIM D9.5&3.0T2.66
52/1.	[1]	146420-3900	SHIM D9.5&3.0T2.68
52/1.	[1]	146420-4000	SHIM D9.5&3.0T2.70
52/1.	[1]	146420-4100	SHIM D9.5&3.0T2.72
52/1.	[1]	146420-4200	SHIM D9.5&3.0T2.74
52/1.	[1]	146420-4300	SHIM D9.5&3.0T2.76
52/1.	[1]	146420-4400	SHIM D9.5&3.0T2.78
52/1.	[1]	146420-4500	SHIM D9.5&3.0T2.80
52/1.	[1]	146420-4600	SHIM D9.5&3.0T2.82
52/1.	[1]	146420-4700	SHIM D9.5&3.0T2.84
52/1.	[1]	146420-4800	SHIM D9.5&3.0T2.86
52/1.	[1]	146420-4900	SHIM D9.5&3.0T2.88
52/1.	[1]	146420-5000	SHIM D9.5&3.0T2.90
52/1.	[1]	146420-5100	SHIM D9.5&3.0T1.74
52/1.	[1]	146420-5200	SHIM D9.5&3.0T1.76
52/1.	[1]	146420-5300	SHIM D9.5&3.0T1.78
52/1.	[1]	146420-5400	SHIM D9.5&3.0T1.80
52/1.	[1]	146420-5500	SHIM D9.5&3.0T1.82
52/1.	[1]	146420-5600	SHIM D9.5&3.0T1.84
52/1.	[1]	146420-5700	SHIM D9.5&3.0T1.86
52/1.	[1]	146420-5800	SHIM D9.5&3.0T1.88
54.	[4]	146433-0100	GASKET
55.	[4]	146430-3320	DELIVERY-VALVE ASSEMBLY VE33
56.	[4]	146432-0000	COMPRESSION SPRING
58.	[4]	146440-0220	FITTING
60.	[3]	139106-0100	FLAT-HEAD SCREW
67.	[1]	146822-3320	GOVERNOR COVER
67/1.	[1]	146508-1022	GOVERNOR COVER
67/2.	[1]	146815-0120	CONTROL SHAFT
67/3.	[1]	146600-0100	O-RING
67/4.	[2]	139310-0200	PLAIN WASHER
67/4.	[2]	139310-0200	PLAIN WASHER
67/5.	[1]	146832-5500	CONTROL LEVER MARK:255
67/5B.	[1]	146832-5600	CONTROL LEVER MARK:256
67/5C.	[1]	146832-9300	CONTROL LEVER MARK:293
67/5D.	[1]	146832-9400	CONTROL LEVER MARK:294
67/6.	[2]	014110-6440	LOCKING WASHER D12.2&6.1T1.5
67/6.	[2]	014110-6440	LOCKING WASHER D12.2&6.1T1.5
67/7.	[1]	013020-6040	UNION NUT
67/8.	[1]	146515-1820	LEVER SHAFT
67/9.	[1]	146587-4500	COILED SPRING
67/10.	[1]	146600-0200	O-RING
67/11.	[1]	146602-0100	PLAIN WASHER
67/12.	[1]	146540-1300	CONTROL LEVER
67/12B.	[1]	146540-1400	CONTROL LEVER MARK:0
67/12C.	[1]	146540-5200	CONTROL LEVER
67/12D.	[1]	146540-5300	CONTROL LEVER
67/13.	[1]	146621-1700	UNION NUT
67/14.	[1]	146621-1700	UNION NUT
67/15.	[1]	146526-3400	BLEEDER SCREW
67/16.	[1]	146526-7300	FLAT-HEAD SCREW
67/18.	[1]	146587-0400	COILED SPRING
67/19.	[1]	146541-0000	ANGLE PIECE
67/23.	[1]	146925-2520	BRACKET
67/24.	[2]	139006-4500	BLEEDER SCREW
67/25.	[1]	013020-6040	UNION NUT
67/78.	[1]	146600-4400	SEAL RING
67/200.	[1]	139308-0300	PLAIN WASHER
67/201.	[1]	146545-4600	THREADED PIN L=24MM
67/201B.	[1]	146545-4700	THREADED PIN L=26MM
67/201C.	[1]	146545-4800	THREADED PIN L=28MM
67/202.	[1]	146598-5000	UNION NUT
67/203.	[1]	146600-1200	O-RING
67/204.	[1]	146545-4500	DAMPER
95.	[1]	146891-3020	FULCRUM LEVER
104.	[2]	146568-0000	SLOTTED SPRING PIN
105.	[2]	026508-1140	GASKET D11.4&8.2T1.0
106.	[2]	146588-0500	COILED SPRING
107.	[1]	146569-0300	UNION NUT
108.	[1]	146570-0420	GOVERNOR SHAFT
109.	[1]	146600-0400	O-RING
110/1.	[1]	146571-0000	SHIM D20.2&8.3T1.05
110/1.	[1]	146571-0100	SHIM D20.2&8.3T1.25
110/1.	[1]	146571-0200	SHIM D20.2&8.3T1.45
110/1.	[1]	146571-0300	SHIM D20.2&8.3T1.65
110/1.	[1]	146571-0400	SHIM D20.2&8.3T1.85
110/1.	[1]	146571-0500	SHIM D20.2&8.3T1.15
110/1.	[1]	146571-0600	SHIM D20.2&8.3T1.35
110/1.	[1]	146571-0700	SHIM D20.2&8.3T1.55
110/1.	[1]	146571-0800	SHIM D20.2&8.3T1.75
111.	[1]	146602-0600	PLAIN WASHER
112.	[1]	146572-0020	FLYWEIGHT ASSEMBLY
114.	[1]	146602-9400	PLAIN WASHER
115.	[1]	146976-3000	SLIDING SLEEVE
116.	[1]	146576-0400	CAP
117/1.	[1]	146877-0820	PLUG L=5.0
117/1.	[1]	146877-0920	PLUG L=5.1
117/1.	[1]	146877-1020	PLUG L=5.2
117/1.	[1]	146877-1120	PLUG L=5.3
117/1.	[1]	146877-1220	PLUG L=5.4
117/1.	[1]	146877-1320	PLUG L=5.5
117/1.	[1]	146877-1420	PLUG L=5.6
117/1.	[1]	146877-1520	PLUG L=5.7
117/1.	[1]	146877-1620	PLUG L=5.8
117/1.	[1]	146877-1720	PLUG L=5.9
117/1.	[1]	146877-1820	PLUG L=6.0
117/1.	[1]	146877-1920	PLUG L=6.1
117/1.	[1]	146877-2020	PLUG L=6.2
117/1.	[1]	146877-2120	PLUG L=6.3
117/1.	[1]	146877-2220	PLUG L=6.4
117/1.	[1]	146877-2320	PLUG L=6.5
117/1.	[1]	146877-2420	PLUG L=6.6
117/1.	[1]	146877-2520	PLUG L=6.7
117/1.	[1]	146877-2620	PLUG L=6.8
117/1.	[1]	146877-2720	PLUG L=6.9
117/1.	[1]	146877-2820	PLUG L=7.0
117/1.	[1]	146877-2920	PLUG L=7.1
117/1.	[1]	146877-3020	PLUG L=7.2
117/1.	[1]	146877-3120	PLUG L=7.3
117/1.	[1]	146877-3220	PLUG L=7.4
117/1.	[1]	146877-3320	PLUG L=7.5
117/1.	[1]	146877-3420	PLUG L=7.6
117/1.	[1]	146877-3520	PLUG L=7.7
117/1.	[1]	146877-3620	PLUG L=7.8
117/1.	[1]	146877-3720	PLUG L=7.9
117/1.	[1]	146877-3820	PLUG L=8.0
117/1.	[1]	146877-3920	PLUG L=8.1
117/1.	[1]	146877-4020	PLUG L=8.2
117/1.	[1]	146877-4120	PLUG L=8.3
117/1.	[1]	146877-4220	PLUG L=8.4
120.	[1]	146879-6820	RETAINING PIN
122.	[1]	146580-0600	GOVERNOR SPRING
123.	[4]	139106-0200	FLAT-HEAD SCREW
130.	[1]	146421-0020	CAPSULE
130/2.	[1]	026508-1140	GASKET D11.4&8.2T1.0
130/3.	[1]	146422-0000	BLEEDER SCREW
130/4.	[1]	146600-0500	O-RING
133.	[1]	146600-0600	O-RING
134.	[1]	146600-0700	O-RING
135.	[1]	146110-3720	CONTROL VALVE
135/5.	[1]	146114-0000	SPRING WASHER
136.	[1]	146120-0120	OVER FLOW VALVE
137.	[2]	139512-0500	GASKET
200.	[1]	146206-0100	COILED SPRING
235.	[1]	146935-8601	BRACKET
236.	[2]	010206-2240	HEX-SOCKET-HEAD CAP SCREW
237.	[1]	146620-0200	HEX-SOCKET-HEAD CAP SCREW
240.	[1]	146650-1220	PULLING ELECTROMAGNET
240/8.	[1]	146600-1700	O-RING
242.	[1]	146662-1420	WIRE
243.	[1]	146621-4901	UNION NUT
245.	[1]	139512-0500	GASKET
247.	[1]	146669-1720	INLET UNION
251.	[1]	146125-0101	FILTER
252.	[1]	146125-0200	COILED SPRING
343.	[1]	146598-8700	CAP NUT
410.	[1]	014020-6140	PLAIN WASHER D11.5&6.5
411.	[1]	146598-6300	CAP NUT
800S.	[1]	146020-1820	PUMP HOUSING
800S/1/6.	[1]	146601-0900	PACKING RING
804S.	[1]	146232-0720	COMPRESSION SPRING
805S.	[1]	146574-1220	PARTS SET
810S.	[1]	146600-1120	REPAIR SET
821S.	[1]	146210-5720	ROLLER SET
825S.	[1]	146598-8600	CAP NUT
835S.	[1]	146598-7320	CAP
836S.	[1]	146598-7920	CAP
837S.	[1]	146598-7310	CAP
838S.	[1]	146598-6710	CAP
906.	[1]	146940-2800	NAMEPLATE
907.	[1]	025803-1640	WOODRUFF KEY
908.	[1]	013021-2140	UNION NUT
909.	[1]	014111-2440	LOCKING WASHER

Include in #2:

104741-8131 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH F 01G 09W 0FX f01g09w0fx

ZEXEL 104741-8131 1047418131

MITSUBISHI-HEAV 32A6510410 32a6510410

Zexel num

Bosch num

Firm num

Name

104741-8131
104741-8132

F 01G 09W 0FX

32A6510410 MITSUBISHI-HEAV

INJECTION-PUMP ASSEMBLY
S4S * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113orSAEJ967d

Test oil temperature degC 45 45 50

Nozzle 105780-0060

Bosch type code NP-DN0SD1510

Nozzle holder 105780-2150

Opening pressure MPa 13 13 13.3

Opening pressure kgf/cm2 133 133 136

Injection pipe 157805-7320

Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-450

Joint assembly 157641-4720

Tube assembly 157641-4020

Transfer pump pressure kPa 20 20 20

Transfer pump pressure kgf/cm2 0.2 0.2 0.2

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Pump speed r/min 1100 1100 1100

Average injection quantity mm3/st. 46.9 46.4 47.4

Difference in delivery mm3/st. 4

Basic *

Oil temperature degC 50 48 52

Injection timing adjustment_02

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 45.6 40.1 51.1

Oil temperature degC 48 46 50

Injection timing adjustment_03

Pump speed r/min 800 800 800

Average injection quantity mm3/st. 47.7 43.7 51.7

Oil temperature degC 50 48 52

Injection timing adjustment_04

Pump speed r/min 1100 1100 1100

Average injection quantity mm3/st. 46.9 45.9 47.9

Difference in delivery mm3/st. 4.5

Basic *

Oil temperature degC 50 48 52

Injection timing adjustment_05

Pump speed r/min 1250 1250 1250

Average injection quantity mm3/st. 44.7 38.2 48.7

Oil temperature degC 50 48 52

Injection quantity adjustment

Pump speed r/min 1350 1350 1350

Average injection quantity mm3/st. 13.8 11.8 15.8

Difference in delivery mm3/st. 4

Basic *

Oil temperature degC 50 48 52

Injection quantity adjustment_02

Pump speed r/min 1450 1450 1450

Average injection quantity mm3/st. 3

Oil temperature degC 50 48 52

Injection quantity adjustment_03

Pump speed r/min 1350 1350 1350

Average injection quantity mm3/st. 13.8 10.3 17.3

Difference in delivery mm3/st. 4.5

Basic *

Oil temperature degC 50 48 52

Governor adjustment

Pump speed r/min 475 475 475

Average injection quantity mm3/st. 8.2 6.2 10.2

Difference in delivery mm3/st. 2

Basic *

Oil temperature degC 48 46 50

Governor adjustment_02

Pump speed r/min 475 475 475

Average injection quantity mm3/st. 8.2 5.7 10.7

Difference in delivery mm3/st. 2.5

Basic *

Oil temperature degC 48 46 50

Timer adjustment

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 54.8 49.8 59.8

Basic *

Oil temperature degC 48 46 50

Remarks
Full

Timer adjustment_02

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 54.8 49.8 59.8

Oil temperature degC 48 46 50

Remarks
Full

Speed control lever angle

Pump speed r/min 475 475 475

Average injection quantity mm3/st. 0 0 0

Oil temperature degC 48 46 50

Remarks
Magnet OFF at idling position

0000000901

Pump speed r/min 800 800 800

Overflow quantity cm3/min 420 290 550

Oil temperature degC 50 48 52

Stop lever angle

Pump speed r/min 800 800 800

Pressure kPa 549 520 578

Pressure kgf/cm2 5.6 5.3 5.9

Basic *

Oil temperature degC 50 48 52

Stop lever angle_02

Pump speed r/min 600 600 600

Pressure kPa 500 451 549

Pressure kgf/cm2 5.1 4.6 5.6

Oil temperature degC 50 48 52

Stop lever angle_03

Pump speed r/min 800 800 800

Pressure kPa 549 510 588

Pressure kgf/cm2 5.6 5.2 6

Basic *

Oil temperature degC 50 48 52

Stop lever angle_04

Pump speed r/min 1000 1000 1000

Pressure kPa 598 549 647

Pressure kgf/cm2 6.1 5.6 6.6

Oil temperature degC 50 48 52

Stop lever angle_05

Pump speed r/min 1100 1100 1100

Pressure kPa 628 579 677

Pressure kgf/cm2 6.4 5.9 6.9

Oil temperature degC 50 48 52

Stop lever angle_06

Pump speed r/min 1250 1250 1250

Pressure kPa 647 598 696

Pressure kgf/cm2 6.6 6.1 7.1

Oil temperature degC 50 48 52

0000001101

Pump speed r/min 800 800 800

Timer stroke mm 1.6 1.4 1.8

Basic *

Oil temperature degC 50 48 52

_02

Pump speed r/min 600 600 600

Timer stroke mm 0.6 0 1.2

Oil temperature degC 50 48 52

_03

Pump speed r/min 800 800 800

Timer stroke mm 1.6 1.2 2

Basic *

Oil temperature degC 50 48 52

_04

Pump speed r/min 1000 1000 1000

Timer stroke mm 2.4 1.8 3

Oil temperature degC 50 48 52

_05

Pump speed r/min 1250 1250 1250

Timer stroke mm 2.9 2.4 3.3

Oil temperature degC 50 48 52

0000001201

Max. applied voltage V 8 8 8

Test voltage V 13 12 14

0000001401

Pump speed r/min 1000 1000 1000

Average injection quantity mm3/st. 40 39.5 40.5

Timer stroke TA mm 1.4 1.2 1.6

Basic *

Oil temperature degC 50 48 52

_02

Pump speed r/min 1250 1250 1250

Average injection quantity mm3/st. 44.7 38.2 48.7

Timer stroke TA mm 2.9 2.4 3.3

Timer stroke variation dT mm 0 0 0

Oil temperature degC 50 48 52

_03

Pump speed r/min 1250 1250 1250

Average injection quantity mm3/st. 33 32 34

Timer stroke TA mm 1.5 0.5 2.5

Timer stroke variation dT mm 1.4 1.4 1.4

Oil temperature degC 50 48 52

Timing setting

K dimension mm 3.3 3.2 3.4

KF dimension mm 5.8 5.7 5.9

MS dimension mm 1 0.9 1.1

Pre-stroke mm 0.1 0.08 0.12

Control lever angle alpha deg. 21.5 17.5 25.5

Control lever angle beta deg. 29 24 34

Test data Ex:

0000001801 STARTING I/Q ADJUSTMENT

Starting Q decrease lever adjustment Adjust using the screw (A) so that the standards are satisfied, then fix using the nut (B). Screw (A) protrusion: L (B) Nut (SW10, T1 after completing adjustment) (C) Cap (D) Stop lever
----------
L=7.4~11.1mm T1=6~9N-m(0.6~0.9kgf-m)
----------
L=7.4~11.1mm

Information:

TECHNICAL INFORMATION BULLETIN November 30, 2005
This Technical Information Bulletin replaces the November 11, 2005 TIB "System Malfunctions Related To The Injection Actuation Pressure Sensors In Excavators, Wheel Loaders, Engines, Track-Type Tractors and Track Loaders". Disregard the November 11, 2005 TIB. Refer to the following information.
Excavators 322C (EMR215-523,MAR165-468)
325C (CRB650-1677,CSJ800-1486)
(DTF276-285,JLC283-306)
(JLD313-348)
330C (CAP950-2085,CGZ444-889)
(JCD285-351,MKM308-316)
330CL(JNK238-343)
Wheel Loaders 938GII (PHN550-2023)
950GII (AYB693-1086)
(AYL1039-2384)
962GII (AYE530-695,BAB437-758)
Engines C9 (C9B1-266,CSN1-1070)
(JLW1-279,JSC1-395)
(MTB1-1550,X9X1-258)
Track-Type Tractors D6N LGP (ALR1-715)
(ALY1-1932)
(CCG1-261)
(CCS1-402)
D6N XL (AKM1-1694,ALH1-794)
(CBF1-309,CBJ1-448)
(CBL1-400,CCK1-623)
D6RII (AEM1-117,BPM1-104)
(BRJ1-201,CAD1-257)
(FDT1-362)
D6RII LGP (ACJ1-113)
(ADE1-1016)
(AFD1-98)
(BNC1-433)
(BPP1-502)
(BPZ1-532)
D6RII XL (AAX1-139)
(AGM1-111)
(BMJ1-166)
(BMY1-479)
(BPS1-503)
(BRZ1-537)
D6RII XW (AEP1-711)
(BRE1-501)
(DAE1-192)
D6RIII LGP (WCB1-111,WRG1-157)
D6RIII XW (HDC1-132,MRT1-1)
Track Loader 963C (BBD1-2311)
Component Code 1925SUBJECT: System Malfunctions Related To The Injection Actuation Pressure Sensors In Excavators, Wheel Loaders, Engines, Track-Type Tractors and Track Loaders
PROBLEM:
The Injection Actuation Pressure (IAP) sensors are being replaced on machine applications with C7/3126 engines. Some C9 engine models are also affected. The system event code 164-11 or 164-02 leads the technician to replace the sensor. Many of these sensors are no fault found. The result of these failures is loss of production due to unscheduled downtime.
SOLUTION:
Follow current troubleshooting guidelines for highway trucks to troubleshoot the part causing the failure. This will aid the technician in finding the correct part causing the failure. Report any troubleshooting guidelines errors using the feedback function in the Service Information System (SIS Web).
COPYRIGHT 2005 CATERPILLAR
ALL RIGHTS RESERVED