101491-0222 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1014910222 8941279571

Information Cross number Calibration Data Calibration Data Ex

Information injection-pump assembly

ZEXEL 101491-0222 1014910222

ISUZU 8941279571 8941279571

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101491-0222 zexel genuine, new aftermarket engine parts with delivery

Service parts 101491-0222 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101049-8260

3. GOVERNOR 105931-1481

4. SUPPLY PUMP 105210-4610

5. AUTOM. ADVANCE MECHANIS 105622-1260

6. COUPLING PLATE

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105100-6391

11. Nozzle and Holder 8-94151-865-1

12. Open Pre:MPa(Kqf/cm2) 18.1{185}

13. NOZZLE-HOLDER 105030-3201

14. NOZZLE

105015-6060

15. NOZZLE SET

Include in #1:

101491-0222 as INJECTION-PUMP ASSEMBLY

106672-4782 as _

Cross reference number

ZEXEL 101491-0222 1014910222

ISUZU 8941279571 8941279571

Zexel num

Bosch num

Firm num

Name

101491-0222

8941279571 ISUZU

INJECTION-PUMP ASSEMBLY
4BC2 * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-3-4-2

Pre-stroke mm 3.4 3.35 3.45

Rack position
Point A R=A

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-3 deg. 90 89.5 90.5

Difference between angles 2
Cal 1-4 deg. 180 179.5 180.5

Difference between angles 3
Cyl.1-2 deg. 270 269.5 270.5

Injection quantity adjustment

Adjusting point -

Rack position 10.4

Pump speed r/min 1100 1100 1100

Average injection quantity mm3/st. 55 53.4 56.6

Max. variation between cylinders % 0 -2.5 2.5

Basic *

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_02

Adjusting point H

Rack position 9.5+-0.5

Pump speed r/min 300 300 300

Average injection quantity mm3/st. 6.7 5.2 8.2

Max. variation between cylinders % 0 -14 14

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_03

Adjusting point A

Rack position R1(10.4)

Pump speed r/min 1100 1100 1100

Average injection quantity mm3/st. 55 54 56

Basic *

Fixing the lever *

Injection quantity adjustment_04

Adjusting point B

Rack position R1-0.1

Pump speed r/min 1800 1800 1800

Average injection quantity mm3/st. 54.1 52.5 55.7

Fixing the lever *

Injection quantity adjustment_05

Adjusting point C

Rack position R1+0.1

Pump speed r/min 700 700 700

Average injection quantity mm3/st. 42.5 40.9 44.1

Fixing the lever *

Injection quantity adjustment_06

Adjusting point D

Rack position R1+0.7

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 45.4 43.4 47.4

Fixing the lever *

Timer adjustment

Pump speed r/min 1650--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 1600

Advance angle deg. 0.6

Timer adjustment_03

Pump speed r/min 1800

Advance angle deg. 3 2.5 3.5

Timer adjustment_04

Pump speed r/min 1900

Advance angle deg. 4.5 4 5

Timer adjustment_05

Pump speed r/min -

Advance angle deg. 5 5 5

Remarks
Measure the actual speed, stop

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1
----------
T1=72
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt set position 'H' (2)Speed = aa, rack position = bb (lever angle with microswitch ON)
----------
aa=1150r/min bb=7.2mm
----------
a=0deg+-5deg b=50deg+-3deg c=42deg+-3deg

Timing setting

(1)Pump vertical direction (2)Position of gear mark 'CC' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=15deg
----------
a=(100deg)

Information:

New Part Number Reman Part Number Description
198-6605 10R0781 Injector Gp.- Fuel
177-4754 10R0782 Injector Gp.- Fuel
Features And Benefits
Cat® Remanufactured injectors offer excellent value to customers. Customers who want fast repair turn-around, superior quality and reliability, and lower repair costs will benefit from the use of these Remanufactured injectors. Cat Remanufactured injectors provide immediate, off-the-shelf availability at a fraction of the new
Features Benefits
? All critical engineering changes and updates included ? Improved reliability and performance
? Worldwide availability through Caterpillar® parts distribution system ? Customer access regardless of location
? Off-the-shelf availability ? Downtime reduced through exchange product
? Backed by Cat warranty ? Consistent support
Core Acceptance
Core Acceptance Criteria for Caterpillar Remanufactured injectors is simple, visual, and requires no special tools. Full core credit is issued when the core is complete, fully assembled, and has an acceptable part number. Consult your Core Acceptance Guide for complete details.
Warranty
Please consult the appropriate warranty statement for your area.
Core Management
Please refer to the Caterpillar Core Management Information System (CMIS 2) Parts Information application describing all reman part/CAF and related information. Also refer to other CMIS 2 inquiry applications such as Customer Profiles, Inspection Reason Codes, Inspection Line Inquiry, Add Charge Information, Entitlement Activity, Entitlement Inquiry, CCR Inquiry, CCR Entry, Shipment Processing; Process Packaging Grief; and Reporting to properly manage core returns and monitor inspection performance. This information will be available to all dealers worldwide after your CMIS 2 conversion date. In the meantime, please continue to use the current CMIS Entitlement Parts Inquiry Screen describing the list of parts in a Core Acceptability Family (CAF) and related part number
For the latest updates of Reman Policies and Core Management (SELD0122), Core Management Systems & Operations Procedures (SELD0040), and Shipping Instructions (SELD0039), go to the Reman website and click on Procedures and Policies (listed under Reman Program Information).
If you have any questions regarding core return processing, feel free to call your Corinth Dealer Service Representative toll free at (800) 537-2928 or use our e-mail address -- reman_core_operations. For assistance with technical questions, call the Peoria Reman Customer Satisfaction Hot Line also toll free at (888) 88-REMAN or use our e-mail address--Reman_Help.
RWSmith
Remanufactured Products Group
LC-2148 (309) 675-5445