Information union nut
BOSCH
9 442 610 928
9442610928
ZEXEL
013020-8020
0130208020
Rating:
Include in ###:
Number on scheme 50
1030889200
as UNION NUT
M8P1.25H7
1054450130
as UNION NUT
1054450330
as UNION NUT
M8P1.25H7
1054550340
as UNION NUT
1054550350
as UNION NUT
M8P1.25H7
1054550622
as UNION NUT
1054550632
as UNION NUT
M8P1.25H7
1054550741
as UNION NUT
1054550750
as UNION NUT
M8P1.25H7
1054551061
as UNION NUT
1054551110
as UNION NUT
M8P1.25H7
Cross reference number
Zexel num
Bosch num
Firm num
Name
013020-8020
9 442 610 928
UNION NUT
D 90HY NUT Standard parts Others
D 90HY NUT Standard parts Others
Information:
Parts Location
Illustration 2 g01880455
Exploded view
Illustration 3 g01880482
Diesel Particulate Filter Group (shown installed) (1) 5P-1076 Hard Washer (2) 8T-4121 Hard Washer (3) 8T-4139 Bolt (4) 8T-4195 Bolt (5) 141-1480 Clamp As (6) 233-8141 Diesel Particulate Filter Gp (7) 8T-4244 Nut (8) 235-3962 Support As (9) 235-3963 Clamp As Installation Procedure
You must thoroughly understand the guidelines in Special Instruction, REHS5606, "Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications)" before you attempt any part of the following installation procedure.The installation procedure that follows is specific for the listed machines.Diesel Particulate Filter Installation
Illustration 4 g01833715
Right Side View (14) Muffler (existing) (15) 208-5448 Support As (existing) (16) 208-5451 Support As (existing)
Remove the existing muffler (14). Refer to the appropriate Disassembly and Assembly manual for your machine. Refer to Illustration 4.
Remove the existing 208-5448 Support As (15) from the engine. Discard the existing support assembly. Refer to Illustration 4.Note: Do not remove the existing 208-5451 Support As (16). Refer to Illustration 4.
Illustration 5 g01880233
(2) 8T-4121 Hard Washers (4) 8T-4195 Bolts (8) 235-3962 Support As
Position 235-3962 Support As (8) in the former location for support assembly (15). Refer to Illustration 4.
Secure support assembly (8) by using two 8T-4195 Bolts (4) and two 8T-4121 Hard Washers (2). Refer to Illustration 5.
Illustration 6 g01879959
(1) 5P-1076 Hard Washers (3) 8T-4139 Bolts (7) 8T-4244 Nut (8) 235-3962 Support As (9) 235-3963 Clamp As (Lower half)
Remove the two bolts, two hard washers, two lock washers, and two nuts from 235-3963 Clamp As (9). Keep these parts together along with
Illustration 2 g01880455
Exploded view
Illustration 3 g01880482
Diesel Particulate Filter Group (shown installed) (1) 5P-1076 Hard Washer (2) 8T-4121 Hard Washer (3) 8T-4139 Bolt (4) 8T-4195 Bolt (5) 141-1480 Clamp As (6) 233-8141 Diesel Particulate Filter Gp (7) 8T-4244 Nut (8) 235-3962 Support As (9) 235-3963 Clamp As Installation Procedure
You must thoroughly understand the guidelines in Special Instruction, REHS5606, "Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications)" before you attempt any part of the following installation procedure.The installation procedure that follows is specific for the listed machines.Diesel Particulate Filter Installation
Illustration 4 g01833715
Right Side View (14) Muffler (existing) (15) 208-5448 Support As (existing) (16) 208-5451 Support As (existing)
Remove the existing muffler (14). Refer to the appropriate Disassembly and Assembly manual for your machine. Refer to Illustration 4.
Remove the existing 208-5448 Support As (15) from the engine. Discard the existing support assembly. Refer to Illustration 4.Note: Do not remove the existing 208-5451 Support As (16). Refer to Illustration 4.
Illustration 5 g01880233
(2) 8T-4121 Hard Washers (4) 8T-4195 Bolts (8) 235-3962 Support As
Position 235-3962 Support As (8) in the former location for support assembly (15). Refer to Illustration 4.
Secure support assembly (8) by using two 8T-4195 Bolts (4) and two 8T-4121 Hard Washers (2). Refer to Illustration 5.
Illustration 6 g01879959
(1) 5P-1076 Hard Washers (3) 8T-4139 Bolts (7) 8T-4244 Nut (8) 235-3962 Support As (9) 235-3963 Clamp As (Lower half)
Remove the two bolts, two hard washers, two lock washers, and two nuts from 235-3963 Clamp As (9). Keep these parts together along with
Have questions with 013020-8020?
Group cross 013020-8020 ZEXEL
Hino
013020-8020
9 442 610 928
UNION NUT