105237-5350 ZEXEL 9 440 610 855 BOSCH SUPPLY PUMP 9440610855 1052375350

Information supply pump

BOSCH 9 440 610 855 9440610855

ZEXEL 105237-5350 1052375350

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy SUPPLY PUMP 105237-5350 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

1.	[1]	152004-2320	PUMP HOUSING
5.	[1]	152100-1120	PUMP PLUNGER
6.	[1]	152102-1300	COMPRESSION SPRING
7.	[1]	152105-1500	CAPSULE
8.	[1]	029332-6030	GASKET
10.	[1]	152111-4420	TAPPET
10/2.	[1]	152112-0800	ROLLER
10/3.	[1]	152113-1300	BEARING PIN
10/4.	[2]	152114-1600	SLIDER
14.	[4]	152115-0500	VALVE BODY
14.	[4]	152115-0500	VALVE BODY
15.	[4]	152116-0200	COILED SPRING
15.	[4]	152116-0200	COILED SPRING
16.	[3]	152117-0400	CAPSULE
18.	[3]	029331-6030	GASKET
19.	[1]	029631-6060	O-RING
20.	[1]	152121-0400	LOCKING WASHER
25.	[1]	152200-5320	HAND PRIMER
30.	[1]	152300-3620	EYE BOLT
32.	[1]	029731-4680	EYE BOLT
33.	[1]	139814-0500	INLET UNION
35.	[2]	029341-4130	GASKET D20&13.8T2*
36.	[2]	029341-4130	GASKET D20&13.8T2*
42.	[1]	152320-0100	COVER

Include in #1:

106682-9881 as SUPPLY PUMP

Cross reference number

Zexel num

Bosch num

Firm num

Name

105237-5350

9 440 610 855
NP-FP/KD-P7S

SUPPLY PUMP
K 14GC FEED PUMP F/P

Information:

941B 80H3884-Up
(1) Remove the engine from the machine; see the Service Manual for the procedure. Put both engines, new and old, in a position that will give good access to their front, rear, top and both sides. For those engines that were equipped with glow plugs, either remove the wire from the heat-start switch to the glow plug lead assembly, or put tape over the end of the wire when it is disconnected. This wire will not be needed because the new engine does not have glow plugs.(2) From the old engine, remove the crankshaft pulley and hub, engine front support, the rear supports (from the sides of the flywheel housing) and the flywheel. Install these