Information supply pump
BOSCH
9 440 610 260
9440610260
ZEXEL
105237-5070
1052375070
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$168.00
20 Aug 2021
US: Kesstro
Wishbay Fuel Feed Pump 105237-5070 1052375070 Compatible with Komatsu 6D140 Engine
Wishbay Part Number: 105237-5070 1052375070 || Compatible with Komatsu 6D140 Engine || Fitment Type: Direct Replacement || Delivery Time: We will ship the item to you by DHL/FedEx/UPS, which will arrive in 3-7 Work days once we ship it to you. The delivery time will not a month like which shown online, you could buy with confidence! || Note: 1.We Only Ship To Confirmed Order Addresses. Your Order Address Must Match Your Shipping Address. 2.in Order To Avoid Unnecessary Return,please Check The Product Picture And Part Number Carefully To Make Sure It Is The Product You Want.
Wishbay Part Number: 105237-5070 1052375070 || Compatible with Komatsu 6D140 Engine || Fitment Type: Direct Replacement || Delivery Time: We will ship the item to you by DHL/FedEx/UPS, which will arrive in 3-7 Work days once we ship it to you. The delivery time will not a month like which shown online, you could buy with confidence! || Note: 1.We Only Ship To Confirmed Order Addresses. Your Order Address Must Match Your Shipping Address. 2.in Order To Avoid Unnecessary Return,please Check The Product Picture And Part Number Carefully To Make Sure It Is The Product You Want.
$169.00
20 May 2021
CN: Hasaka
MOKE Fuel Feed Pump 105237-5070 1052375070 Compatible with Komatsu 6D140 Engine
MOKE Part Number: 105237-5070 1052375070 || Compatible with Komatsu 6D140 Engine || Fitment Type: Direct Replacement || Delivery Time: We will ship the item to you by DHL/FedEx/UPS, which will arrive in 3-7 Work days once we ship it to you. The delivery time will not a month like which shown online, you could buy with confidence! || Note: 1.We Only Ship To Confirmed Order Addresses. Your Order Address Must Match Your Shipping Address. 2.in Order To Avoid Unnecessary Return,please Check The Product Picture And Part Number Carefully To Make Sure It Is The Product You Want.
MOKE Part Number: 105237-5070 1052375070 || Compatible with Komatsu 6D140 Engine || Fitment Type: Direct Replacement || Delivery Time: We will ship the item to you by DHL/FedEx/UPS, which will arrive in 3-7 Work days once we ship it to you. The delivery time will not a month like which shown online, you could buy with confidence! || Note: 1.We Only Ship To Confirmed Order Addresses. Your Order Address Must Match Your Shipping Address. 2.in Order To Avoid Unnecessary Return,please Check The Product Picture And Part Number Carefully To Make Sure It Is The Product You Want.
Scheme ###:
| 1. | [1] | 152004-3820 | PUMP HOUSING |
| 5. | [1] | 152100-1120 | PUMP PLUNGER |
| 6. | [1] | 152102-1600 | COMPRESSION SPRING |
| 7. | [1] | 152105-1500 | CAPSULE |
| 8. | [1] | 029332-6030 | GASKET |
| 10. | [1] | 152111-4320 | TAPPET |
| 10/2. | [1] | 152112-0700 | ROLLER |
| 10/3. | [1] | 152113-1000 | BEARING PIN |
| 10/4. | [2] | 152114-1700 | SLIDER |
| 14. | [4] | 152115-0500 | VALVE BODY |
| 14. | [4] | 152115-0500 | VALVE BODY |
| 15. | [4] | 152116-0200 | COILED SPRING |
| 15. | [4] | 152116-0200 | COILED SPRING |
| 16. | [3] | 152117-0400 | CAPSULE |
| 18. | [3] | 029331-6030 | GASKET |
| 19. | [1] | 029631-6060 | O-RING |
| 20. | [1] | 152121-0400 | LOCKING WASHER |
| 25. | [1] | 152200-5420 | HAND PRIMER |
| 30. | [1] | 152300-5920 | EYE BOLT |
| 32. | [1] | 029731-4680 | EYE BOLT |
| 33. | [1] | 029711-4310 | INLET UNION |
| 35. | [2] | 029341-4130 | GASKET D20&13.8T2* |
| 36. | [2] | 029341-4130 | GASKET D20&13.8T2* |
| 42. | [1] | 152320-0100 | COVER |
Include in #1:
106671-9680
as SUPPLY PUMP
Cross reference number
Zexel num
Bosch num
Firm num
Name
Information:
start by: a) remove fuel injection pumpsb) separation of governor from fuel injection pump housingc) remove fuel transfer pump1. Loosen the screws that hold the levers to the shaft assembly. 2. Remove the screw (1) that holds the lever assembly (2) to the shaft assembly. 3. Remove the shaft assembly (5) from the housing and remove the levers (3) and lever assembly (2).4. Loosen the screws that hold the levers (6) to the shaft.5. Remove the screw that holds the lever (4) to the shaft.6. Remove the shaft (7) from the housing and remove the levers. 7. Remove the lifter and roller assemblies (8) from the housing with a magnet. Put identification on the lifters (10) and rollers (9) for installation in their respective bores in the housing. 8. Remove the camshaft (11) from the housing.
Do not use a force to remove the camshaft. Turn the camshaft to permit the free passage of the camshaft by the bosses (12) in the housing.
Assemble Fuel Injection Pump Housing
1. Install the camshaft (1) in the housing.
Do not use a force to install the camshaft. Turn the camshaft to permit the free passage of the camshaft by the bosses in the housing.
2. Install the lifter and roller assemblies (2) in their respective bores in the housing with a magnet. Install the lifters with their grooves in alignment with the pins (3) in the housing. 3. Put the shaft (4) in the housing. Slide the levers (6) and the lever (5) on to the shaft in the order shown. Push the shaft into position in the housing. 4. Install the screw that holds the lever (5) to the shaft. Tighten the screw to a torque of 24 2 lb.in. (27.7 2.3 cm.kg). 5. Put the shaft assembly (7) in the housing. Slide the levers (9) and the lever assembly (8) on to the shaft in the order shown. Push the shaft assembly into position in the housing. 6. Install the screw that holds the lever assembly (8) to the shaft assembly. Tighten the screw to a torque of 24 2 lb. in. (27.7 2.3 cm.kg).end by: a) make adjustments to the sleeve control shafts (see TESTING AND ADJUSTING)b) install fuel transfer pumpc) connection of governor to fuel injection pump housingd) install fuel injection pumps
Do not use a force to remove the camshaft. Turn the camshaft to permit the free passage of the camshaft by the bosses (12) in the housing.
Assemble Fuel Injection Pump Housing
1. Install the camshaft (1) in the housing.
Do not use a force to install the camshaft. Turn the camshaft to permit the free passage of the camshaft by the bosses in the housing.
2. Install the lifter and roller assemblies (2) in their respective bores in the housing with a magnet. Install the lifters with their grooves in alignment with the pins (3) in the housing. 3. Put the shaft (4) in the housing. Slide the levers (6) and the lever (5) on to the shaft in the order shown. Push the shaft into position in the housing. 4. Install the screw that holds the lever (5) to the shaft. Tighten the screw to a torque of 24 2 lb.in. (27.7 2.3 cm.kg). 5. Put the shaft assembly (7) in the housing. Slide the levers (9) and the lever assembly (8) on to the shaft in the order shown. Push the shaft assembly into position in the housing. 6. Install the screw that holds the lever assembly (8) to the shaft assembly. Tighten the screw to a torque of 24 2 lb. in. (27.7 2.3 cm.kg).end by: a) make adjustments to the sleeve control shafts (see TESTING AND ADJUSTING)b) install fuel transfer pumpc) connection of governor to fuel injection pump housingd) install fuel injection pumps