105235-1821 ZEXEL 9 440 610 508 BOSCH SUPPLY PUMP 9440610508 1052351821

Information supply pump

BOSCH 9 440 610 508 9440610508

ZEXEL 105235-1821 1052351821

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy SUPPLY PUMP 105235-1821 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

1.	[1]	152002-2220	PUMP HOUSING
5.	[1]	152100-1120	PUMP PLUNGER
6.	[1]	152104-0400	COMPRESSION SPRING
7.	[1]	152105-1500	CAPSULE
10.	[1]	152111-4620	TAPPET
10/2.	[1]	152112-0800	ROLLER
10/3.	[1]	152113-1300	BEARING PIN
10/4.	[2]	152114-1600	SLIDER
14.	[4]	152115-0500	VALVE BODY
14.	[4]	152115-0500	VALVE BODY
15.	[4]	152116-0200	COILED SPRING
15.	[4]	152116-0200	COILED SPRING
16.	[3]	152117-0400	CAPSULE
19.	[1]	029631-6060	O-RING
20.	[1]	152121-0200	LOCKING WASHER
25.	[1]	152200-5320	HAND PRIMER
30.	[1]	152300-4020	EYE BOLT
32.	[1]	029731-4680	EYE BOLT
35.	[5]	029341-4130	GASKET D20&13.8T2*
35.	[5]	029341-4130	GASKET D20&13.8T2*
36.	[2]	132400-0200	ADAPTOR
36.	[2]	132400-0200	ADAPTOR
42.	[1]	152320-0100	COVER

Include in #1:

103662-3052 as SUPPLY PUMP

Cross reference number

Zexel num

Bosch num

Firm num

Name

105235-1821

9 440 610 508
NP-FP/KD-Z

SUPPLY PUMP
K 14GC FEED PUMP F/P

Information:

Piston Pin Bearing Removal And Installation (Connecting rods that have straight sides on the piston pin end).
The 5P8639 Press Group and the 5P8655 Tool Group are used to remove and install the piston pin bearings in the connecting rods. Use the procedure that follows to remove and install the piston pin bearing from the connecting rod.Remove the crankshaft bearing from the large end of the connecting rod and install the cap on the rod.Put the connecting rod in an oven and get the temperature of the rod to 400°F (204°C).Put the 5P8654 Spacer in the counterbore of the base plate. Be sure the spacer is in the bore straight and is against the bottom of the counterbore. Put the