Information supply pump
BOSCH
9 440 610 790
9440610790
ZEXEL
105210-6400
1052106400
HINO
225602830A
225602830a
Rating:
Scheme ###:
| 1. | [1] | 152061-0020 | PUMP HOUSING |
| 2. | [1] | 152030-0300 | STOP PIN |
| 5. | [1] | 152100-2301 | PUMP PLUNGER |
| 6. | [1] | 152102-1300 | COMPRESSION SPRING |
| 7. | [1] | 152105-1500 | CAPSULE |
| 8. | [1] | 139526-0000 | GASKET |
| 14. | [2] | 152115-0500 | VALVE BODY |
| 14. | [2] | 152115-0500 | VALVE BODY |
| 15. | [2] | 152116-0200 | COILED SPRING |
| 15. | [2] | 152116-0200 | COILED SPRING |
| 16. | [1] | 152119-1420 | VALVE |
| 16/1. | [1] | 152207-2000 | ADAPTOR |
| 16/2. | [1] | 152119-0020 | VALVE BODY |
| 16/3. | [1] | 029341-4070 | GASKET |
| 16/4. | [1] | 152310-1000 | ADAPTOR |
| 16/5. | [1] | 029632-0030 | O-RING |
| 16/6. | [1] | 029111-4120 | SCREW PLUG M14P1.5L13 |
| 16/7. | [1] | 139514-0300 | GASKET |
| 18. | [2] | 029631-6060 | O-RING |
| 18. | [2] | 029631-6060 | O-RING |
| 25. | [1] | 152200-6720 | HAND PRIMER |
| 30. | [1] | 152300-7020 | EYE BOLT |
| 32. | [1] | 029731-4080 | EYE BOLT |
| 35. | [2] | 139514-0300 | GASKET |
| 36. | [2] | 139514-0300 | GASKET |
Include in #1:
101602-5051
as SUPPLY PUMP
Cross reference number
Zexel num
Bosch num
Firm num
Name
Information:
Fuel Injection Pipe, Fuel Leak-Off Pipe and Fuel Injection Nozzle
To prevent dust from entering the fuel system, cover all openings in the fuel injection pump, nozzle inlet connectors and injection pipes.
Fuel Injection Pump
To prevent dust from entering the fuel system, cover all openings in the fuel injection pump.
Removal of Fuel Injection Pump
(1) Check the alignment marks stamped on the flange of the fuel injection pump and the pump mounting flange.(2) Remove the front cover from the engine.(3) Place alignment marks on the fuel injection pump gear and idler gear.(4) Unscrew the mounting bolts from the fuel injection pump flange, and remove the fuel injection pump together with the flange from the front plate. (a) After the fuel injection pump is removed, do not turn the engine.(b) When removing the pump gear, loosen the gear retaining nut while the pump is mounted on the engine.
Removal of fuel injection pump (1)
Removal of fuel injection pump (2)
To prevent dust from entering the fuel system, cover all openings in the fuel injection pump, nozzle inlet connectors and injection pipes.
Fuel Injection Pump
To prevent dust from entering the fuel system, cover all openings in the fuel injection pump.
Removal of Fuel Injection Pump
(1) Check the alignment marks stamped on the flange of the fuel injection pump and the pump mounting flange.(2) Remove the front cover from the engine.(3) Place alignment marks on the fuel injection pump gear and idler gear.(4) Unscrew the mounting bolts from the fuel injection pump flange, and remove the fuel injection pump together with the flange from the front plate. (a) After the fuel injection pump is removed, do not turn the engine.(b) When removing the pump gear, loosen the gear retaining nut while the pump is mounted on the engine.
Removal of fuel injection pump (1)
Removal of fuel injection pump (2)