105210-6290 ZEXEL 9 440 610 261 BOSCH SUPPLY PUMP 9440610261 1052106290

Information supply pump

BOSCH 9 440 610 261 9440610261

ZEXEL 105210-6290 1052106290

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy SUPPLY PUMP 105210-6290 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

1.	[1]	152061-0020	PUMP HOUSING
2.	[1]	152030-0300	STOP PIN
5.	[1]	152100-2301	PUMP PLUNGER
6.	[1]	152102-2300	COMPRESSION SPRING
7.	[1]	152105-1500	CAPSULE
8.	[1]	139526-0000	GASKET
14.	[2]	152115-0500	VALVE BODY
14.	[2]	152115-0500	VALVE BODY
15.	[2]	152116-0200	COILED SPRING
15.	[2]	152116-0200	COILED SPRING
16.	[1]	152118-0900	ADAPTOR
18.	[2]	029631-6060	O-RING
18.	[2]	029631-6060	O-RING
25.	[1]	152200-6720	HAND PRIMER
30.	[1]	152300-5520	EYE BOLT
32.	[1]	029111-4050	CAPSULE
33.	[1]	131563-7420	PIPE
35.	[2]	026514-1840	GASKET D17.9&14.2T1
36.	[1]	026514-2040	GASKET
49.	[1]	029731-4680	EYE BOLT
51.	[2]	026514-1840	GASKET D17.9&14.2T1

Include in #1:

101401-9444 as SUPPLY PUMP

101401-9445

101401-9452

101401-9453

Cross reference number

Zexel num

Bosch num

Firm num

Name

105210-6290

9 440 610 261

SUPPLY PUMP
* K 14GC FEED PUMP F/P

Information:

Oil Pump
Disassembly and Inspection of Oil Pump
Measurement of Clearance Between Outer Rotor and Inner Rotor
Measure the clearance between the outer rotor and inner rotor, and, if the limit value is exceeded, replace the pump assembly.
Measurement of clearance between outer rotor and inner rotorMeasurement of Rotor and Case End Play
Measure the rotor and case end play, and, if the limit value is exceeded, replace the pump assembly.
Measurement of rotor and cover end playMeasurement of Clearance Between Outer Rotor and Pump Case
Measure the clearance between the outer rotor and pump case, and, if the limit value is exceeded, replace the pump assembly.
Measure the clearance between the outer rotor and caseReassembly of Oil Pump
Install the outer rotor to the pump case, check alignment mark (indentations) on the pump case cover, and then tighten the bolts. If the alignment marks are not aligned during the reassembly, the pump will not suck oil.
Alignment marks on pump case and pump case coverOil Filter and Oil Cooler
Disassembly and Inspection of Oil Filter and Oil Cooler
Relief Valve
Inspection of Relief Valve
(1) Check the relief valve and valve seat for contact condition, and the spring for fatigue and damage, and replace any defective parts.(2) Measure the valve opening pressure (oil pressure when the engine is running at rated rpm) of the relief valve, and, if the standard valve is exceeded, remove the cap bolt and make an adjustment by increasing or decreasing the shim thickness.
Relief Valve