105210-6160 ZEXEL 9 440 610 882 BOSCH SUPPLY PUMP 9440610882 1052106160 8971159780


 

Information supply pump

BOSCH 9 440 610 882 9440610882
ZEXEL 105210-6160 1052106160
ISUZU 8971159780 8971159780
105210-6160 SUPPLY PUMP
Rating:
25
Buy SUPPLY PUMP 105210-6160 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
105210-6160 
9 440 610 882 
NP-FP/KEP-A 
8971159780  ISUZU
SUPPLY PUMP
K 14GC FEED PUMP F/P




Information:

Fuel Filter
Disassembly and Inspection of Fuel Filter
(For in-line fuel injection pump) (For distributor-type fuel injection pump) Reassembly of Fuel Filter
(For in-line fuel injection pump) Before installing the cartridge, clean the mounting surface on the cartridge, coat the gasket with clean fuel oil. Screw in the cartridge until the gasket contacts the seal surface of the bracket, then turn cartridge full turn by hand. (Do not use a filter wrench for this installation.) Do not use a filter that has dents or scratches, since damaged filter can break during engine operation.
After installation, start the engine and check to make sure there is no fuel leak.
(For distributor-type fuel injection pump) Do not use a filter that has dents or scratches, since damaged filter can break during engine operation.
After installation, start the engine and check to make sure there is no fuel leak.
Fuel Injection Nozzles
Disassembly of Fuel Injection Nozzles
Inspection of Fuel Injection Nozzles
Check each fuel injection nozzle for the following, and if defects are found, repair or replace the fuel injection nozzle.(1) Inspection of injection start pressure(a) Install each fuel injection nozzle on the nozzle tester, and move the handle up and down to release air.(b) Operate the handle of the tester at a rate of about 1 stroke per second, and read the indication on the pressure gage. The indication rises slowly, and the indicator oscillates during spraying. To obtain the injection start pressure value, read the indication when the indicator starts to oscillate.
Inspection of fuel injection nozzle valve opening(c) If the injection start pressure deviates significantly from the standard value, disassemble the fuel injection nozzle, and make an adjustment by changing the washer thickness. 0.1 mm [0.0039 in.] thickness of shims will change the injection pressure 0.98 Mpa (10 kgf/cm2 [142 psi]. The shims are available in 10 different thickness from 1.25 to 1.70 mm [0.0492 to 0.0669 in.] increment of 0.05 mm [0.0020 in.]
Never tap the tip of the nozzle tip when removing the nozzle tip.
Replacement of fuel injection nozzle tip(2) Inspection of fuel injection nozzle spray pattern(a) When inspecting each fuel injection nozzle with the nozzle tester, also check the nozzle for clogs, spray pattern and leakage.(b) Make sure that the fuel is sprayed straight from the nozzle when the handle of the tester is operated at a rate of about 1 stroke per second.
Inspection of spray pattern of fuel injection nozzle(3) Cleaning and replacement of faulty nozzles(a) Loosen the nozzle retaining nut, remove the nozzle tip, and clean the needle valve and body.
Never tap the tip of the nozzle tip when removing the nozzle tip.
(b) Use a fresh cleaning solution to clean the needle valve and body. After cleaning, assemble the needle valve and body in clean diesel fuel. The needle valve and body are precision finished. Handle them carefully, and do not change the combination of parts.
Cleaning of fuel injection nozzle tip(c) Tighten the nozzle retaining nut on the nozzle tip to the specified torque.(d) If the spray pattern is still not acceptable after adjustment

Have questions with 105210-6160?





Group cross 105210-6160 ZEXEL

Isuzu 

9 440 610 158 
NP-FP/KEP-A 
8971143510 
SUPPLY PUMP
9 440 610 963 
8971159770 
SUPPLY PUMP
9 440 610 287 
NP-FP/KEP-A 
8971159771 
SUPPLY PUMP
9 440 610 288 
NP-FP/KEP-AD 
8971159750 
SUPPLY PUMP

Nissan 

9 440 610 288 
NP-FP/KEP-AD 
1664089TA2 
SUPPLY PUMP

Isuzu 

9 440 610 152 
NP-FP/KEP-A 
8971386440 
SUPPLY PUMP
9 440 610 289 
NP-FP/KEP-A 
8971207340 
SUPPLY PUMP
9 440 610 881 
NP-FP/KEP-A 
8971177710 
SUPPLY PUMP
105210-6160  
9 440 610 882 
NP-FP/KEP-A 
8971159780 
SUPPLY PUMP
9 440 610 290 
NP-FP/KEP-AD 
8971179440 
SUPPLY PUMP

Nissan 

9 440 610 290 
NP-FP/KEP-AD 
1664089TA3 
SUPPLY PUMP

Mitsubishi 

9 440 610 883 
NP-FP/KEP-AD 
ME738726 
SUPPLY PUMP
9 440 610 884 
NP-FP/KEP-A 
ME738857 
SUPPLY PUMP
Back to top