105210-6110 ZEXEL 9 440 610 963 BOSCH SUPPLY PUMP 9440610963 1052106110 8971159770


 

Information supply pump

BOSCH 9 440 610 963 9440610963
ZEXEL 105210-6110 1052106110
ISUZU 8971159770 8971159770
105210-6110 SUPPLY PUMP
Rating:
18
Buy SUPPLY PUMP 105210-6110 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

1. [1] 152061-0120 PUMP HOUSING
2. [1] 152030-0200 STOP PIN
5. [1] 152100-2301 PUMP PLUNGER
6. [1] 152102-0400 COMPRESSION SPRING
7. [1] 152105-1500 CAPSULE
8. [1] 139526-0000 GASKET
14. [2] 152115-0500 VALVE BODY
14. [2] 152115-0500 VALVE BODY
15. [2] 152116-0200 COILED SPRING
15. [2] 152116-0200 COILED SPRING
16. [1] 152118-0900 ADAPTOR
18. [2] 029631-6060 O-RING
18. [2] 029631-6060 O-RING
25. [1] 152200-6720 HAND PRIMER
30. [1] 152300-5620 EYE BOLT
32. [1] 029111-4050 CAPSULE
33. [1] 152350-7820 PIPE
35. [2] 029341-4080 GASKET
36. [1] 026514-2040 GASKET
49. [1] 029731-4580 EYE BOLT
51. [2] 026514-2040 GASKET

Cross reference number

Zexel num
Bosch num
Firm num
Name
105210-6110 
105210-6111 
9 440 610 963 
8971159770  ISUZU
SUPPLY PUMP
* K




Information:

Cautions Regarding Battery* Handle Battery Carefully * Never use flames or allow sparks near the battery. The battery releases flammable hydrogen gas and oxygen gas. These gases can be ignited by flames and cause an explosion.* Do not use the battery when the fluid surface is lower than the minimum level. Using a battery with a low electrolyte level can result in an explosion.* Do not short the battery terminals with a tool or other metal object.* When disconnecting battery cables, always remove the cable from the negative (-) terminal first. When reconnecting cables, attach the cable to the positive (+) terminal first.* Charge the battery in a well-ventilated area, with all filling hole plugs removed.* Make sure the cable clamps are securely installed on the battery terminals. A loose cable clamp can cause sparks that may result in explosion.* Before servicing electrical components or conducting electrical welding, set the battery switch to the [Open/OFF] position or disconnect the cable from the negative (-) battery terminal to cut off the electrical current.* Electrolyte (battery fluid) contains dilute sulfuric acid. Careless handling of the battery can lead to the loss of sight and/or burns. Also, do not swallow electrolyte.* Wear protective goggles and rubber gloves when maintaining and inspecting the battery (when adding water, charging, etc.).* If electrolyte is spilled onto the skin or clothes, immediately wash with lots of clean fresh water and thoroughly clean with soap.* If electrolyte gets into eyes, immediately flush with lots of clean fresh water and seek immediate medical attention.* Should you accidentally swallow electrolyte, gargle with plenty of water, then drink lots of water, and seek immediate medical attention.
Response To Abnormalities* If Engine Overheats, Conduct Heating Operation Before Stopping The Engine If the engine overheats, do not stop the engine immediately. Abruptly stopping an overheated engine may cause the coolant temperature to rise, resulting in seizing of the engine. If the engine overheats, operate the engine at low idling speed (cooling temperature), and stop the engine after the coolant temperature lowers sufficiently.Do not add coolant immediately after stopping the engine. Adding coolant to a hot engine may cause damage to the cylinder heads due to sudden change in temperature. Add coolant after the engine cools to room temperature.* If Engine Stops Due To Abnormality, Exercise Caution When Restarting If the engine stops due to an abnormality, do not restart the engine immediately. If the engine stops with an alarm, check and correct the cause of the problem before restarting. Operating the engine without correcting the problem may result in serious engine problems.* If Oil Pressure Drops, Stop Engine Immediately If the engine oil pressure decreases, stop the engine immediately, and inspect the lubrication system. Operating the engine with low oil pressure may cause seizing of the bearings and other parts.* If Fan Belt Breaks, Stop Engine Immediately If the fan belt breaks, stop the engine immediately. Continued operation of the engine without the fan belt causes coolant to change to steam and

Have questions with 105210-6110?





Group cross 105210-6110 ZEXEL

Isuzu 

9 440 610 158 
NP-FP/KEP-A 
8971143510 
SUPPLY PUMP
105210-6110  

105210-6111 
9 440 610 963 
8971159770 
SUPPLY PUMP
9 440 610 287 
NP-FP/KEP-A 
8971159771 
SUPPLY PUMP
9 440 610 288 
NP-FP/KEP-AD 
8971159750 
SUPPLY PUMP

Nissan 

9 440 610 288 
NP-FP/KEP-AD 
1664089TA2 
SUPPLY PUMP

Isuzu 

9 440 610 152 
NP-FP/KEP-A 
8971386440 
SUPPLY PUMP
9 440 610 289 
NP-FP/KEP-A 
8971207340 
SUPPLY PUMP
9 440 610 881 
NP-FP/KEP-A 
8971177710 
SUPPLY PUMP
9 440 610 882 
NP-FP/KEP-A 
8971159780 
SUPPLY PUMP
9 440 610 290 
NP-FP/KEP-AD 
8971179440 
SUPPLY PUMP

Nissan 

9 440 610 290 
NP-FP/KEP-AD 
1664089TA3 
SUPPLY PUMP

Mitsubishi 

9 440 610 883 
NP-FP/KEP-AD 
ME738726 
SUPPLY PUMP
9 440 610 884 
NP-FP/KEP-A 
ME738857 
SUPPLY PUMP
Back to top