150585-9800 ZEXEL 9 431 612 042 BOSCH STOP PIN 9431612042 1505859800 me748790


 

Information stop pin

BOSCH 9 431 612 042 9431612042
ZEXEL 150585-9800 1505859800
MITSUBISHI ME748790 me748790
150585-9800 STOP PIN
Rating:
64
Buy STOP PIN 150585-9800 zexel genuine, new aftermarket engine parts with delivery

Include in ###:

Number on scheme 13/1
STOP PIN   
D2.2L27.32
1050484441 as STOP PIN D2.2L27.32

Cross reference number

Zexel num
Bosch num
Firm num
Name
150585-9800 
9 431 612 042 
ME748790  MITSUBISHI
STOP PIN
C 53PZ PUSH ROD NH parts NH




Information:

Starting From External Electrical Source
Always wear protective glasses when working with batteries.Do not allow the free end of booster cables to make contact with each other or touch the engine. This will help prevent sparks near the batteries.Batteries give off flammable fumes that can explode.Do not smoke when observing the battery electrolyte levels.Electrolyte is an acid and can cause personal injury if it contacts skin or eyes.
Be sure the main power switch is in the OFF position before attaching the booster cables to the engine being started. When using booster cables, be sure to connect in parallel: POSITIVE (+) to POSITIVE (+) and NEGATIVE (-) to NEGATIVE (-).Use only equal voltage for boost starting. The use of a welder or higher voltage will damage the electrical system.
Engines without engine-to-frame ground straps can be damaged by electrical discharge.To prevent electrical discharge damage, check to make sure there is an engine-to-frame ground strap. For engines which have the alternator connected to an engine component, the ground strap must connect that component to the frame.Some engines have starter-to-frame ground straps. But, many of these starters are not electrically grounded to the engine. They have electrical insulation systems. For this reason, the starter-to-frame ground strap may not be an acceptable ground.Connect one end of cable to the POSITIVE (+) (ungrounded) terminal of the battery on the engine being started. Connect the other end to the POSITIVE (+) terminal of the power source.Connect one end of the second cable to the NEGATIVE (-) terminal of the power source. Connect the other end to the frame of the engine to be started.Turn the start switch on and start the engine.Disconnect the cable from the frame first. Disconnect the other end from the NEGATIVE (-) terminal of the power source. Disconnect the cable from the POSITIVE (+) terminal of the battery. Disconnect the other end from the POSITIVE (+) terminal of the power source.

Have questions with 150585-9800?





Group cross 150585-9800 ZEXEL

Mitsubishi 

150585-9800  
9 431 612 042 
ME748790 
STOP PIN
Back to top