Information spacer bushing
BOSCH
9 461 610 583
9461610583
ZEXEL
146720-2000
1467202000
ISUZU
8941227490
8941227490

Rating:
Include in ###:
Number on scheme 67/48/1
1047401023
as SPACER BUSHING
L4.0
1047401131
as SPACER BUSHING
1047401132
as SPACER BUSHING
L4.0
1047401141
as SPACER BUSHING
1047401142
as SPACER BUSHING
L4.0
1047401490
as SPACER BUSHING
1047401491
as SPACER BUSHING
L4.0
1047401710
as SPACER BUSHING
1047401720
as SPACER BUSHING
L4.0
1047402020
as SPACER BUSHING
1047402022
as SPACER BUSHING
L4.0
1047402030
as SPACER BUSHING
1047402031
as SPACER BUSHING
L4.0
Cross reference number
Zexel num
Bosch num
Firm num
Name
146720-2000
9 461 610 583
8941227490 ISUZU
SPACER BUSHING
C 11FV SPACER parts(VE) Others
C 11FV SPACER parts(VE) Others
146720-2000
9 461 610 583
19275W3401 NISSAN
SPACER BUSHING
C 11FV SPACER parts(VE) Others
C 11FV SPACER parts(VE) Others
146720-2000
9 461 610 583
19275W3401 NISSAN-DIESEL
SPACER BUSHING
C 11FV SPACER parts(VE) Others
C 11FV SPACER parts(VE) Others
146720-2000
9 461 610 583
RFG113T39 MAZDA
SPACER BUSHING
C 11FV SPACER parts(VE) Others
C 11FV SPACER parts(VE) Others
Information:
9. If the engine oil pressure gauge does not register within 10 seconds, stop the engine by pulling up on the accelerator pedal. Have corrections made.10. Keep the engine at low idle until the systems are warm.11. Watch all gauges and indicators. They must have correct readings before moving the machine.Below 0°C (32°F)
1. Follow the steps under "Above 0°C (32°F)."
If the engine does not start after two attempts, use starting fluid. This will prevent excessive battery drain and starting motor overheating.Use starting fluid (ether) only while cranking the engine.Use sparingly, excessive ether can cause piston and ring damage.Ether is to be used for cold weather starting purposes only.
Keep batteries charged to a corrected specific gravity of 1.250 or above. Otherwise, an external electrical source may be required. 2. Use starting fluid while cranking the engine. Push the button located below the start switch, at two second intervals only. A metered amount of starting fluid (ether) is released each time the button is pushed.3. Use additional starting fluid every two seconds until the engine starts.4. Release the start switch when the engine starts. Continue to inject ether until the engine runs smoothly.For starting below - 18°C (0°F), use additional starting aids. A coolant
1. Follow the steps under "Above 0°C (32°F)."
If the engine does not start after two attempts, use starting fluid. This will prevent excessive battery drain and starting motor overheating.Use starting fluid (ether) only while cranking the engine.Use sparingly, excessive ether can cause piston and ring damage.Ether is to be used for cold weather starting purposes only.
Keep batteries charged to a corrected specific gravity of 1.250 or above. Otherwise, an external electrical source may be required. 2. Use starting fluid while cranking the engine. Push the button located below the start switch, at two second intervals only. A metered amount of starting fluid (ether) is released each time the button is pushed.3. Use additional starting fluid every two seconds until the engine starts.4. Release the start switch when the engine starts. Continue to inject ether until the engine runs smoothly.For starting below - 18°C (0°F), use additional starting aids. A coolant
Have questions with 146720-2000?
Group cross 146720-2000 ZEXEL
Isuzu
146720-2000
9 461 610 583
8941227490
SPACER BUSHING
Nissan
146720-2000
9 461 610 583
19275W3401
SPACER BUSHING
Nissan-Diesel
146720-2000
9 461 610 583
19275W3401
SPACER BUSHING
Mazda
146720-2000
9 461 610 583
RFG113T39
SPACER BUSHING