159564-0100 ZEXEL F 019 Z8E 921 BOSCH SLOTTED WASHER f019z8e921 1595640100 1157231890


 

Information slotted washer

BOSCH F 019 Z8E 921 f019z8e921
ZEXEL 159564-0100 1595640100
ISUZU 1157231890 1157231890
159564-0100 SLOTTED WASHER
Rating:
29
Buy SLOTTED WASHER 159564-0100 zexel genuine, new aftermarket engine parts with delivery

Include in ###:

Number on scheme 5
SLOTTED WASHER
1059520021 as SLOTTED WASHER

Cross reference number

Zexel num
Bosch num
Firm num
Name
159564-0100 
159564-4000 
F 019 Z8E 921 
1157231890  ISUZU
SLOTTED WASHER
C 14GJ SPRING SEAT GOV
159564-0100 
159564-4000 
F 019 Z8E 921 
ME717091  MITSUBISHI
SLOTTED WASHER
C 14GJ SPRING SEAT GOV
159564-0100 
159564-4000 
F 019 Z8E 921 
1922799003  NISSAN-DIESEL
SLOTTED WASHER
C 14GJ SPRING SEAT GOV




Information:


AFFECTED PRODUCT
Model Identification Number
994K MM900301-00322
MRK00201-00204, 312-333
SMX00201-00209
PARTS NEEDED
Qty
Part Number Description
2 4538963 INJECTOR AS
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 9% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
The existing standard grease injectors will need to be replaced with new 453-8963 XL Injector Assemblies for the both left-hand and right-hand K-pins. Refer to Image1.
Refer to the attached Rework Procedure.
Image1
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-15000 hrs,
0-36 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 1.0-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
Refer to the following Rework Procedure in order to install two new 453-8963 XL Injector Assemblies.
Refer to Image1.1.1 for the location of the injector bank.
1. Remove cover (A). Refer to Image1.1.2.
Image1.1.1
Image1.1.2
2. Remove existing injectors (C). Refer to Image1.2.1.
Image1.2.1
3. In order to remove the existing injector, loosen lower bolt (D) from the injector bank until half of the injector is free. Refer to Image1.3.1.
4. Remove the existing grease zerks, grease zerk caps, and adapters and reinstall on the new 453-8963 XL Injector Assemblies.
Image1.3.1
5. Install new 453-8963 XL Injector Assemblies (1).
6. Purge 453-8963 XL Injector Assemblies (1) with grease.
7. Adjust to full output (20 turns).
8. Reinstall cover (A).
Image1.4.1

Have questions with 159564-0100?





Group cross 159564-0100 ZEXEL

Isuzu 

159564-0100  

159564-4000 
F 019 Z8E 921 
1157231890 
SLOTTED WASHER

Mitsubishi 

159564-0100  

159564-4000 
F 019 Z8E 921 
ME717091 
SLOTTED WASHER

Nissan-Diesel 

159564-0100  

159564-4000 
F 019 Z8E 921 
1922799003 
SLOTTED WASHER
Back to top