150534-3000 ZEXEL 9 431 610 249 BOSCH SHIM 9431610249 1505343000 8941769660


 

Information shim

BOSCH 9 431 610 249 9431610249
ZEXEL 150534-3000 1505343000
ISUZU 8941769660 8941769660
150534-3000 SHIM
Rating:
24
Buy SHIM 150534-3000 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
150534-3000 
9 431 610 249 
8941769660  ISUZU
SHIM
C 53PZ SHIM NH parts NH
150534-3000 
9 431 610 249 
MD603905  MITSUBISHI
SHIM
C 53PZ SHIM NH parts NH
150534-3000 
9 431 610 249 
1661343G04  NISSAN
SHIM
C 53PZ SHIM NH parts NH
150534-3000 
9 431 610 249 
1661365N04  NISSAN
SHIM
A C 53PZ SHIM NH parts NH
150534-3000 
9 431 610 249 
1661343G04  NISSAN-DIESEL
SHIM
C 53PZ SHIM NH parts NH
150534-3000 
9 431 610 249 
PN1113TW5  MAZDA
SHIM
C 53PZ SHIM NH parts NH
150534-3000 
9 431 610 249 
62153450480  ISEKI
SHIM
C 53PZ SHIM NH parts NH
150534-3000 
9 431 610 249 
1603298541  KUBOTA
SHIM
C 53PZ SHIM NH parts NH
150534-3000 
9 431 610 249 
1687153231  KUBOTA
SHIM
C 53PZ SHIM NH parts NH
150534-3000 
9 431 610 249 
12990153850  YANMAR
SHIM
C 53PZ SHIM NH parts NH




Information:

Oils
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact the skin.Keep all exhaust manifold and turbocharger shields in place to protect hot exhaust from oil spray in the event of a line, tube or seal failure.Batteries
Battery electrolyte contains acid and can cause injury. Avoid contact with the skin and eyes.Wash hands after touching batteries and connectors. Use of gloves is recommended.Batteries give off flammable fumes which can explode. Ensure there is proper ventilation for batteries which are located in an enclosure.Always thaw a frozen battery before jump starting. Frozen batteries can explode.Do not smoke when observing battery electrolyte levels.Always wear protective glasses when working with batteries.Never disconnect any charging unit circuit or battery circuit cable from the battery when charging unit is operating. A spark can cause the flammable vapor mixture of hydrogen and oxygen to explode.Fire or Explosion Prevention
Fire may result from lubricating oil or fuel sprayed on hot surfaces causing personal injury and property damage. Inspect all lines and tubes for wear or deterioration. They must be routed, supported or clamped securely. Tighten all connections to the recommended torque. Leaks can cause fires.Determine whether the engine will be operated in an environment in which combustible gases could be drawn through the air inlet system. These gases could cause the engine to overspeed, which in turn could seriously damage the engine and result in bodily injury or property damage.If your application involves the presence of combustible gases, consult your Caterpillar dealer to obtain additional information concerning protection devices (i.e. air inlet shutoff) suitable for the application involved.All fuels, most lubricants and some coolant mixtures are flammable.Diesel fuel is flammable. Gasoline is flammable. The mixture of diesel and gasoline fumes is extremely explosive.Do not smoke while refueling or in a refueling area.Do not smoke in areas where batteries are charged, or where flammable materials are stored.Batteries give off flammable fumes which can explode.Keep all fuels and lubricants stored in properly marked containers and away from all unauthorized persons.Store all oily rags or other flammable material in a protective container, in a safe place.Do not weld or flame cut on pipes or tubes that contain flammable fluids. Clean them thoroughly with nonflammable solvent before welding or flame cutting on them.Remove all flammable materials such as fuel, oil and other debris before they accumulate on the engine.Do not expose the engine to flames, burning brush, etc., if at all possible.Shields (if equipped), which protect hot exhaust components from oil or fuel spray in the event of a line, tube or seal failure, must be installed correctly.Provide adequate and proper waste oil disposal. Oil and fuel filters must be properly installed and housing covers tightened to proper torque when being changed.Batteries must be kept clean, covers kept on all cells, recommended cables and connections used and battery box covers kept in place when operating.When starting from an external source, always connect the positive (+) jumper cable to the POSITIVE (+) terminal of the

Have questions with 150534-3000?





Group cross 150534-3000 ZEXEL

Isuzu 

150534-3000  
9 431 610 249 
8941769660 
SHIM

Mitsubishi 

150534-3000  
9 431 610 249 
MD603905 
SHIM

Nissan 

150534-3000  
9 431 610 249 
1661343G04 
SHIM
150534-3000  
9 431 610 249 
1661365N04 
SHIM

Nissan-Diesel 

150534-3000  
9 431 610 249 
1661343G04 
SHIM

Mazda 

150534-3000  
9 431 610 249 
PN1113TW5 
SHIM

Iseki 

150534-3000  
9 431 610 249 
62153450480 
SHIM

Kubota 

150534-3000  
9 431 610 249 
1603298541 
SHIM
150534-3000  
9 431 610 249 
1687153231 
SHIM

Yanmar 

150534-3000  
9 431 610 249 
12990153850 
SHIM
Back to top