139400-3700 ZEXEL 9 411 610 397 BOSCH SHIM 9411610397 1394003700 1156390520


 

Information shim

BOSCH 9 411 610 397 9411610397
ZEXEL 139400-3700 1394003700
ISUZU 1156390520 1156390520
139400-3700 SHIM
Rating:
10
Buy SHIM 139400-3700 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
139400-3700 
9 411 610 397 
1156390520  ISUZU
SHIM
C 90HY SHIM Standard parts Others
139400-3700 
9 411 610 397 
228814520A  HINO
SHIM
C 90HY SHIM Standard parts Others
139400-3700 
9 411 610 397 
ME717911  MITSUBISHI
SHIM
C 90HY SHIM Standard parts Others
139400-3700 
9 411 610 397 
1671699209  NISSAN-DIESEL
SHIM
C 90HY SHIM Standard parts Others




Information:

Preferred Fuel Grades
The two main types of diesel fuel that are available for your truck engine are typically low sulfur No. 1 diesel fuel and low sulfur No. 2 diesel fuel. Although No. 2 diesel fuels are the most commonly used fuel, No. 1 diesel fuels or a blend of No. 1 diesel fuel and No. 2 diesel fuel is best suited for cold weather operation.There are three major differences between No. 1 diesel fuel and No. 2 diesel fuel.
No. 1 diesel fuel has a lower cloud point. The fuel cloud point is the temperature when a haze appears in the fuel. When the temperature falls below the melting point of the paraffins a haze results. Paraffins are a wax that naturally occurs in petroleum products. The wax can alter the fuel characteristics in cold weather. Solid wax can fill the fuel filters. The solidified wax will stop the flow of fuel. The cloud point must not exceed the lowest expected ambient temperature or other precautions must be taken. Installing a fuel heater is the most practical way to address problems with the cloud point.
No. 1 diesel fuel has a lower pour point. The pour point of the fuel is the temperature that is 3 °C (5 °F) above the temperature that is required for fuel to flow. Fuel stops flowing below the pour point. A fuel's pour point should be at least 6°C (10°F) below the lowest ambient temperature that is required for engine start-up and for engine operation.
No. 1 diesel fuel has a lower rating for kJ or Btu per unit volume of fuel than the average No. 2 diesel fuel.
Table 1
Fuel Recommendations for Ambient Temperatures
Fuel Type Temperature Range(1)
No. 2 Above 0 °C (32 °F)
No. 1 −30 °C (−22 °F) to 0 °C (32 °F)
(1) Contact your Caterpillar dealer for information regarding the acceptable fuels and/or the acceptable blends, if there is potential for colder operating temperatures.No. 2 diesel fuel may be blended with No. 1 diesel fuel or blended with kerosene in the following proportions in order to achieve the capability to flow at lower temperatures.
Table 2
Modification of No. 2 Fuel
Ambient Temperature No. 2 Diesel Fuel (%)(1) No. 1 Diesel Fuel(1)
Above −10 °C (14 °F) 90 10
−10 °C (14 °F) to −20 °C (−4 °F) 70 30
Temperatures below −20 °C (−4 °F) 50 50
(1) Never blend the fuel with gasoline under any circumstances.No. 1 diesel fuel does not have the same energy per unit volume as No. 2 diesel fuel. No. 1 diesel fuel has less energy per unit volume. A reduction in power and fuel efficiency may be noticed with No. 1 diesel fuel or a blend of No. 1 diesel fuel and No. 2 diesel fuel but other operating effects should not be experienced.Check the type of fuel or the fuel blend that is being used before troubleshooting for poor performance during the winter. Be aware of these values when you purchase diesel fuel. Anticipate the average outside temperature for the area for operation

Have questions with 139400-3700?





Group cross 139400-3700 ZEXEL

Isuzu 

139400-3700  
9 411 610 397 
1156390520 
SHIM

Hino 

139400-3700  
9 411 610 397 
228814520A 
SHIM

Mitsubishi 

139400-3700  
9 411 610 397 
ME717911 
SHIM

Nissan-Diesel 

139400-3700  
9 411 610 397 
1671699209 
SHIM
Back to top