Information rack sensor
BOSCH
9 443 613 180
9443613180
ZEXEL
407945-0620
4079450620
Rating:
Include in ###:
Cross reference number
Zexel num
Bosch num
Firm num
Name
407945-0620
9 443 613 180
RACK SENSOR
74EE RACK SENSOR SEN S/S
74EE RACK SENSOR SEN S/S
407945-0620
9 443 613 180
211081280A HINO
RACK SENSOR
C 74EE RACK SENSOR SEN S/S
C 74EE RACK SENSOR SEN S/S
407945-0620
9 443 613 180
S211081280 HINO
RACK SENSOR
A C 74EE RACK SENSOR SEN S/S
A C 74EE RACK SENSOR SEN S/S
Information:
Changing Ether Cylinders
Ether is poisonous and flammable.Do not store replacement cylinders in living areas or in the operator's compartment.Do not smoke while changing ether cylinders.Use ether only in well ventilated areas.Use it with care to avoid fires.Keep the cylinders out of the reach of children.Avoid breathing of the ether vapors or repeated contact of ether with skin.Do not store cylinders in direct sunlight.Do not puncture or burn cylinders.Discard cylinders in a safe place.
The ether cylinder is located at the right front of the machine, inside the guard. 1. Remove the two bolts to open the guard. 2. Loosen the clamp (1). Unscrew the cylinder (2). 3. Remove the used gasket and replace it with the new one provided with each new cylinder. 4. Install a new cylinder and tighten it hand tight. Tighten the clamp.5. Close the guard and install the retaining bolts.
Remove the ether cylinder before shipping the machine.
Ether is poisonous and flammable.Do not store replacement cylinders in living areas or in the operator's compartment.Do not smoke while changing ether cylinders.Use ether only in well ventilated areas.Use it with care to avoid fires.Keep the cylinders out of the reach of children.Avoid breathing of the ether vapors or repeated contact of ether with skin.Do not store cylinders in direct sunlight.Do not puncture or burn cylinders.Discard cylinders in a safe place.
The ether cylinder is located at the right front of the machine, inside the guard. 1. Remove the two bolts to open the guard. 2. Loosen the clamp (1). Unscrew the cylinder (2). 3. Remove the used gasket and replace it with the new one provided with each new cylinder. 4. Install a new cylinder and tighten it hand tight. Tighten the clamp.5. Close the guard and install the retaining bolts.
Remove the ether cylinder before shipping the machine.
Have questions with 407945-0620?
Group cross 407945-0620 ZEXEL
Isuzu
407945-0620
9 443 613 180
RACK SENSOR
Hino
407945-0620
9 443 613 180
211081280A
RACK SENSOR
407945-0620
9 443 613 180
S211081280
RACK SENSOR