154611-6320 ZEXEL 9 421 613 091 BOSCH RACK SENSOR ASSY 9421613091 1546116320 me740342


 

Information rack sensor assy

BOSCH 9 421 613 091 9421613091
ZEXEL 154611-6320 1546116320
MITSUBISHI ME740342 me740342
154611-6320 RACK SENSOR ASSY
Rating:
79
Buy RACK SENSOR ASSY 154611-6320 zexel genuine, new aftermarket engine parts with delivery

Include in ###:

Number on scheme 20
RACK SENSOR ASSY
1059521490 as RACK SENSOR ASSY

Cross reference number

Zexel num
Bosch num
Firm num
Name
154611-6320 
9 421 613 091 
ME740342  MITSUBISHI
RACK SENSOR ASSY
K 14GH RACK SENSOR ASSY GOV




Information:

Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
There have been some isolated instances of issues with the Diesel Particulate Filter (DPF) on certain C3.4B engines.Solution
Caterpillar is aware of this problem. Follow the procedure that is detailed below.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 233-7191 Hose Cleaner Gp 1
Obtain a fuel sample from the engine.
Obtain a lubricating oil sample from the engine.
Attach a copy of the full service history of the engine to the Service Information Systems (SIMSi) report. Include the change history of the following components:
Engine oil
Engine oil filter
Engine fuel filter
Crankcase breather filter
Ensure that the breather element is clean and free from wear or damage. Replace the breather element. Refer to Operation and Maintenance Manual, Engine Crankcase Breather Element - Replace for the correct procedure. Ensure that the inlet hose is clean and free from restriction. If the inlet hose requires replacing, refer to Disassembly and Assembly, Crankcase Breather - Install for the correct procedure.
Determine the service hours of the engine air cleaner element. Ensure that the engine air cleaner element is clean and free from wear, damage, or restriction. If necessary, replace the engine air cleaner element. Refer to Operation and Maintenance Manual, Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace for the correct procedure. Ensure that the hose assemblies are clean and free from restriction and dust.
Inspect the inlet and outlet hoses of the turbocharger for the presence of excessive lubricating oil. If necessary, take photographs inside both inlet and outlet hoses. If necessary, take photographs inside the compressor housing for the inlet and outlet. If excessive lubricating oil is found, replace the turbocharger. Refer to Disassembly and Assembly, Turbocharger

Have questions with 154611-6320?





Group cross 154611-6320 ZEXEL

Mitsubishi 

154611-6320  
9 421 613 091 
ME740342 
RACK SENSOR ASSY
Back to top