Information pump housing
BOSCH
9 411 611 888
9411611888
ZEXEL
131066-1221
1310661221
ISUZU
8971236061
8971236061

Rating:
Include in ###:
Cross reference number
Zexel num
Bosch num
Firm num
Name
131066-1221
9 411 611 888
8971236061 ISUZU
PUMP HOUSING
K 14FL HOUSING;PUMP parts(A,AD) Others
K 14FL HOUSING;PUMP parts(A,AD) Others
131066-1221
9 411 611 888
1671089TA6 NISSAN
PUMP HOUSING
K 14FL HOUSING;PUMP parts(A,AD) Others
K 14FL HOUSING;PUMP parts(A,AD) Others
Information:
Introduction
The following special instructions must be used to test for a crack in the Diesel Particulate Filter (DPF). Do not perform any procedure that is outlined in this Special Instruction until you have read and understand the information that is contained in this document.Required Tools
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     380-5200     Tool Kit     1    
B     366-7782     Attenuator     1    Testing Procedure
Perform a "Manual Diesel Particulate Filter Regeneration" using the electronic service tool.
After the manual DPF regeneration is complete, operate the engine at 1800 rpm for a MINIMUM of 20 minutes to stabilize the DPF temperatures.Note: The engine must maintain a steady speed for the entire duration of the test.
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool.
Illustration 1 g02597531
Typical example (1) DPF Outlet Cap (2) Filter Paper (3) Hose Assembly (4) Air Pump
Illustration 2 g03655197
Typical example
Stop the engine. Disconnect harness assembly from both soot antennae. Remove outlet soot antenna (5). Refer to
The following special instructions must be used to test for a crack in the Diesel Particulate Filter (DPF). Do not perform any procedure that is outlined in this Special Instruction until you have read and understand the information that is contained in this document.Required Tools
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     380-5200     Tool Kit     1    
B     366-7782     Attenuator     1    Testing Procedure
Perform a "Manual Diesel Particulate Filter Regeneration" using the electronic service tool.
After the manual DPF regeneration is complete, operate the engine at 1800 rpm for a MINIMUM of 20 minutes to stabilize the DPF temperatures.Note: The engine must maintain a steady speed for the entire duration of the test.
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool.
Illustration 1 g02597531
Typical example (1) DPF Outlet Cap (2) Filter Paper (3) Hose Assembly (4) Air Pump
Illustration 2 g03655197
Typical example
Stop the engine. Disconnect harness assembly from both soot antennae. Remove outlet soot antenna (5). Refer to
Have questions with 131066-1221?
Group cross 131066-1221 ZEXEL
Isuzu
Nissan
Isuzu
131066-1221
9 411 611 888
8971236061
PUMP HOUSING
Nissan
131066-1221
9 411 611 888
1671089TA6
PUMP HOUSING