Fuel injectors
  1. Home
  2. prestroke
  3. #1596454020

159645-4020 ZEXEL 9 413 615 010 BOSCH PRESTROKE ACTUATOR 9413615010 1596454020 1156121370


 

Information prestroke actuator

BOSCH 9 413 615 010 9413615010
ZEXEL 159645-4020 1596454020
ISUZU 1156121370 1156121370
159645-4020 PRESTROKE ACTUATOR
Rating:
72
Buy PRESTROKE ACTUATOR 159645-4020 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

DIAPHRAGM HOUSING
1. [1] 159598-1821 DIAPHRAGM HOUSING
2. [4] 159596-2800 BLEEDER SCREW
3. [1] 159610-1700 SEAL RING
5. [1] 131420-0400 BLEEDER SCREW
6. [1] 026506-1040 GASKET D9.9&6.2T1
8. [2] 139514-0000 GASKET D19.2&14.2T1.0
9. [1] 139814-0000 EYE BOLT
15. [1] 159650-6320 ACTUATOR
16. [1] 159610-1500 SEAL RING
17. [4] 010206-3040 HEX-SOCKET-HEAD CAP SCREW M6P1L30
17. [4] 010206-3040 HEX-SOCKET-HEAD CAP SCREW M6P1L30
18. [4] 029320-6010 LOCKING WASHER
18. [4] 029320-6010 LOCKING WASHER
19. [1] 139306-0400 PLAIN WASHER
20. [3] 159595-5700 PLAIN WASHER
31. [1] 159596-2520 CLAMPING BAND
800S. [1] 159660-8300 COVER
801S. [1] 159610-1600 SEAL RING
802S. [4] 010206-3040 HEX-SOCKET-HEAD CAP SCREW M6P1L30
803S. [4] 029320-6010 LOCKING WASHER
804S. [1] 159911-1200 SOCKET HOUSING

Include in #1:

107692-1790 as _

Cross reference number

Zexel num
Bosch num
Firm num
Name
159645-4020 
159645-4021 
9 413 615 010 
1156121370  ISUZU
PRESTROKE ACTUATOR
* K




Information:

Start By:a. remove exhaust manifoldb. remove inlet manifoldc. remove fuel injection nozzle assembliesd. remove fuel filtere. remove water temperature regulatorf. remove cylinder head assembly 1. Put cylinder head assembly (1) in position on tool group (A). 2. Put compression on valve spring (2) with tool (C). 3. Remove spring locks (3). 4. Remove tool (C). Remove valve spring cap (2) and valve springs (4). 5. Remove washer (5) and O-ring seal (8) from valve (7).6. Remove seal (6). Remove valve (7). 7. Check the valve spring tension with tool (B). The outer spring force must be 180 9 N (40 2 lb.). The length of the spring under test force must be 27.4 mm (1.08 in.). The free length after test must be 45.2 mm (1.78 in.). The inner spring force must be 68.5 9 N (15.4 2 lb.). The length of the spring under test force must be 23.88 mm (.940 in.). The length after test must be 39.6 mm (1.56 in.).8. Do Steps 1 through 8 again for the remainder of the valves. If the cylinder head is equipped with removable valve guides, refer to module SENB8082-06, System Operating Testing And Adjusting Specifications, 4.236 And 4.2482 Diesel Engines For Lift Trucks.Install Valves
1. Put clean engine oil on the valve stems.2. Install valve (3), washer (2) and seal (1).
The closed coil of the spring must be toward the cylinder head.
3. Install springs (5) and valve spring cap (4). 4. Use tool (A), and put springs under compression, and install O-ring seal on the valve. Exhaust valves have an extra O-ring seal on them.
Locks (6) can be thrown from the valve when tool (A) is released if they are not in their correct position on the valve stem.
5. Use tool (B), and install locks (6) that hold the springs in place.6. Remove tool (A), and hit the top of the valve with a plastic hammer to be sure the locks are in their correct position on the valve.7. Do Steps 1 through 6 again for the remainder of the valves.End By:a. install cylinder head assemblyb. install water temperature regulatorc. install fuel filterd. install fuel injection nozzle assembliese. install inlet manifold

Have questions with 159645-4020?





Group cross 159645-4020 ZEXEL

Isuzu 

159645-4020  

159645-4021 
9 413 615 010 
1156121370 
PRESTROKE ACTUATOR
159645-4021  
9 413 614 658 
1156121371 
PRESTROKE ACTUATOR
Back to top