Information pneumatic governor
BOSCH
F 019 Z1E 181
f019z1e181
ZEXEL
105520-3090
1055203090
ISUZU
5157200930
5157200930

Rating:
Scheme ###:
1. | [1] | 155000-6720 | GOVERNOR HOUSING |
1/1. | [1] | 155001-6120 | GOVERNOR HOUSING |
1/2. | [1] | 155003-0600 | CONTROL LEVER |
1/3. | [1] | 155004-0900 | LEVER SHAFT |
1/4. | [1] | 155005-0200 | COILED SPRING |
1/5. | [1] | 155006-0700 | BLEEDER SCREW |
1/7. | [1] | 155007-0220 | HEADLESS SCREW |
1/7. | [1] | 155007-0220 | HEADLESS SCREW |
1/8. | [1] | 155011-0200 | HEXAGON NUT |
1/9. | [2] | 029010-6010 | CAPSULE M6P1.0L7 |
1/9. | [2] | 029010-6010 | CAPSULE M6P1.0L7 |
1/10. | [2] | 026506-1040 | GASKET D9.9&6.2T1 |
1/10. | [2] | 026506-1040 | GASKET D9.9&6.2T1 |
1/11. | [0] | 029310-8010 | PLAIN WASHER D15&8.4T0.2 |
1/11B. | [0] | 029310-8020 | PLAIN WASHER D15&8.4T0.3 |
1/12. | [3] | 029010-6680 | BLEEDER SCREW |
1/14. | [2] | 029300-8010 | PLAIN WASHER D15&8T1.00 |
1/14B. | [0] | 029300-8030 | PLAIN WASHER D15&8T1.50 |
1/15. | [2] | 155012-0100 | ADAPTOR |
1/15. | [2] | 155012-0100 | ADAPTOR |
1/16. | [1] | 155013-0100 | CAP |
1/17. | [2] | 029630-8060 | O-RING |
1/18. | [2] | 025520-1210 | SPLIT PIN |
2. | [1] | 154007-0200 | ADAPTOR |
3. | [1] | 020018-1840 | BLEEDER SCREW M8P1.25L18 |
4. | [4] | 021006-1540 | FLAT-HEAD SCREW |
5. | [1] | 153406-0400 | BLEEDER SCREW |
6. | [1] | 014110-5440 | LOCKING WASHER |
7. | [1] | 013020-5220 | UNION NUT M5P0.8H4 |
8. | [1] | 023500-6210 | PLAIN WASHER D11&6.4T1.5 |
9. | [1] | 025520-1210 | SPLIT PIN |
10. | [1] | 155020-2520 | DIAPHRAGM |
11. | [1] | 155031-2400 | GOVERNOR SPRING |
12/1. | [0] | 155407-1100 | SHIM D37&30.5T0.5 |
12/1. | [0] | 155407-1200 | SHIM D37&30.5T1.0 |
12/1. | [0] | 155407-1300 | SHIM D37&30.5T1.5 |
12/1. | [0] | 155407-1400 | SHIM D37&30.5T2.0 |
12/1. | [0] | 155407-1500 | SHIM D37&30.5T2.5 |
12/1. | [0] | 155407-1600 | SHIM D37&30.5T3.0 |
12/1. | [0] | 155407-1700 | SHIM D37&30.5T0.2 |
12/1. | [0] | 155407-1800 | SHIM D37&30.5T0.3 |
13. | [1] | 155240-0500 | COVER |
15. | [4] | 020105-1640 | BLEEDER SCREW M5P0.8L16 |
15. | [4] | 020105-1640 | BLEEDER SCREW M5P0.8L16 |
18. | [1] | 155241-2320 | HEADLESS SCREW |
21. | [1] | 155245-0100 | HEXAGON NUT |
23. | [1] | 029142-0010 | CAPSULE |
26. | [1] | 029721-2050 | JOINT CONNECTION |
27. | [1] | 155616-3020 | JOINT CONNECTION |
31. | [1] | 155400-2420 | CONTROL LEVER |
33. | [1] | 155402-2800 | PLATE |
34. | [2] | 029050-5040 | FLAT-HEAD SCREW M5P0.8L9 |
40. | [1] | 155404-0200 | CAP |
50. | [1] | 014110-8440 | LOCKING WASHER |
51. | [1] | 013020-8040 | UNION NUT M8P1.25H7 |
100. | [1] | 029621-7010 | PACKING RING |
140. | [1] | 154390-0000 | GASKET |
Include in #1:
101431-0650
as GOVERNOR
Cross reference number
Zexel num
Bosch num
Firm num
Name
105520-3090
5157200930 ISUZU
PNEUMATIC GOVERNOR
* K 14JQ PNEUMATIC GOVERNOR GOV PG GOV
* K 14JQ PNEUMATIC GOVERNOR GOV PG GOV
Information:
Water Pump
Inspection of Water Pump
If the inspection of the impeller and shaft finds abnormal noise or rough rotation, replace the assembly.
Inspection of impeller and shaft rotation conditionThermostat
Disassembly of Thermostat
Inspection of Thermostat
To test the thermostat operation, immerse the thermostat in a container filled with water, and heat the water while measuring the water temperature. Record the temperature at which the valve starts to open and the temperature at which the valve lift becomes 8 mm [0.3 in.] or more. (a) Stir the water in the container to ensure uniform temperature distribution.(b) When installing the thermostat, be sure to check the valve opening temperature indication stamped on the upper face of the thermostat mounting flange.
Inspection of thermostatOverheat Warning Unit (Thermo Switch)
Inspection of Overheat Warning Unit
Immerse the temperature sensor in oil, and measure the resistance while increasing the oil temperature. If the temperature measurement exceeds the standard value significantly, replace the thermo switch.
Since the inspection requires heating of oil to high temperatures, be careful not to get burns or start a fire.
Overheat warning unit
Inspection of Water Pump
If the inspection of the impeller and shaft finds abnormal noise or rough rotation, replace the assembly.
Inspection of impeller and shaft rotation conditionThermostat
Disassembly of Thermostat
Inspection of Thermostat
To test the thermostat operation, immerse the thermostat in a container filled with water, and heat the water while measuring the water temperature. Record the temperature at which the valve starts to open and the temperature at which the valve lift becomes 8 mm [0.3 in.] or more. (a) Stir the water in the container to ensure uniform temperature distribution.(b) When installing the thermostat, be sure to check the valve opening temperature indication stamped on the upper face of the thermostat mounting flange.
Inspection of thermostatOverheat Warning Unit (Thermo Switch)
Inspection of Overheat Warning Unit
Immerse the temperature sensor in oil, and measure the resistance while increasing the oil temperature. If the temperature measurement exceeds the standard value significantly, replace the thermo switch.
Since the inspection requires heating of oil to high temperatures, be careful not to get burns or start a fire.
Overheat warning unit