134178-1520 ZEXEL 9 443 610 726 BOSCH PLUNGER-AND-BARREL ASSY 9443610726 1341781520 1156320160


 

Information plunger-and-barrel assy

BOSCH 9 443 610 726 9443610726
ZEXEL 134178-1520 1341781520
ISUZU 1156320160 1156320160
134178-1520 PLUNGER-AND-BARREL ASSY
Rating:
10
Buy PLUNGER-AND-BARREL ASSY 134178-1520 zexel genuine, new aftermarket engine parts with delivery

Include in ###:

Number on scheme 7/1
PLUNGER-AND-BARREL ASSY
1080623120 as PLUNGER-AND-BARREL ASSY

Cross reference number

Zexel num
Bosch num
Firm num
Name
134178-1520 
9 443 610 726 
1156320160  ISUZU
PLUNGER-AND-BARREL ASSY
C 14ED PLUNGER ASSY PL(HD-TICS) PL




Information:

(1) Thickness of spacer plate ... 9.970 0.025 mm (.3925 .0010 in) Thickness of spacer plate gasket ... 0.208 0.025 mm (.0082 .0010 in) For height of liner over top of spacer plate make reference to Cylinder Liner Projection.(2) Camshaft bearing bore (installed) ... 58.80 0.06 mm (2.315 .002 in) Bore in block for camshaft bearings ... 65.100 0.025 mm (2.5630 .0010 in)(3) Bore in block for main bearings (standard size) ... 96.926 0.013 mm (3.8160 .0005 in) Bore in block for main bearings 0.51 mm (.020 in) oversize ... 97.436 0.013 mm (3.8361 .0005 in)(4) Dimension from center of main bearing bore to top of cylinder block (new) ... 383.515 0.165 mm (15.099 .0064 in)(5) Dimension from center of main bearing bore to bottom of cylinder block (new) ... 153.99 0.10 mm (6.063 .004 in)(6) Torque for bolts holding bearing caps for main bearings: a. Put 2P2506 Thread Lubricant on threads and washer face.b. Tighten all bolts to ... 41 4 N m (30 3 lb ft)c. Put a mark on each bolt and cap.d. Tighten all bolts from mark ... 90 5° Install bearing caps with the part number toward the front of the engine. Be sure that the mark (number) on the bearing cap next to the bolt hole is in agreement with the mark in the cylinder block.(7) Clearance between main bearing cap and cylinder block ... 0.033 mm (.0013 in) tight to 0.043 mm (.0017 in) loose Main bearing cap width ... 165.095 0.020 mm (6.4998 .0008 in)Width of cylinder block for main bearing cap ... 165.100 0.018 mm (6.5000 .0007 in) (8) Bore in bearing for balancer shaft (installed) ... 53.050 0.061 mm (2.0886 .0024 in) Bore in block for bearings ... 57.851 .025 mm (2.2776 .0010 in)Depth to install bearings at both ends of block ... 0.8

Have questions with 134178-1520?





Group cross 134178-1520 ZEXEL

9 413 611 993 
PT41 
 
PLUNGER

Isuzu 

134178-1520  
9 443 610 726 
1156320160 
PLUNGER-AND-BARREL ASSY
Back to top