Information plunger-and-barrel assy
BOSCH
9 413 610 070
9413610070
ZEXEL
131151-2720
1311512720
MITSUBISHI
ME704144
me704144
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Car Motorcycle Professional Autoparts Diesel Plunger for Pump 131151-2720 A43
Generic Placement on vehicle: Fuel injection pump || Country/region of manufacture: China || Material type: iron || Item weight: 0.5KG
Generic Placement on vehicle: Fuel injection pump || Country/region of manufacture: China || Material type: iron || Item weight: 0.5KG
Fuel Injection Pump Rebuild Kit 131151-2720 Engine Pump Barrel Plunger Assembly A43 Fit for Mitsubishi Fuso Engine 6D20 6D22 8DC8 8DC91 ME704144 Pack of 6
Cabezales Manufacturer MFR Number：131151-2720 , 1311512720 Stamping No. A43 || Package: 6 Pieces of Fuel Diesel Pump Plunger and Barrel.Neutral Packing || Fit for Mitsubishi Fuso Engine 6D20 6D22 8DC8 8DC91 || Notice:Please You Carefully Check Your Vehicle's Pump Plunger Barrel And Make Sure That The Number Must Be Completely The Same As Our Description Fitment || Interchange Number.: 9413610070 , ME704144
Cabezales Manufacturer MFR Number：131151-2720 , 1311512720 Stamping No. A43 || Package: 6 Pieces of Fuel Diesel Pump Plunger and Barrel.Neutral Packing || Fit for Mitsubishi Fuso Engine 6D20 6D22 8DC8 8DC91 || Notice:Please You Carefully Check Your Vehicle's Pump Plunger Barrel And Make Sure That The Number Must Be Completely The Same As Our Description Fitment || Interchange Number.: 9413610070 , ME704144
$36.98
31 Oct 2023
CN: Diesel Injection Par
4Pcs Plunger Barrel Assembly 131151-2720 A43 Fits for MITSUBISHI 6D20 6D22 6D22T Engine
Generic ➽Manufacturer Part Number：131151-2720, Stamping No.:A43. || ➽Package: 4 pieces of plungers and barrels.Neutral packing. || ➽Premium Quality:Our plungers and barrels made of premium strength metal and composite plastic.we have a good air and fuel mixing ability and excellent ability of fuel pump systems,and plunger assembly be inspected reliability and durability in the factory. || ➽Notice:Please you carefully check your vehicle plunger barrel and make sure that the Part number must be completely the same as our description fitment,if you have any problem,please you contact us by email,we will have professional customer service within 24 hours. || ➽Upgrade your engine with the 131151-2720 Fuel Plungers and Barrels. These high-quality diesel parts are designed to optimize fuel delivery, resulting in improved engine performance, increased power, and enhanced fuel efficiency.Experience smooth and reliable operation with the Fuel Plungers and Barrels.
Generic ➽Manufacturer Part Number：131151-2720, Stamping No.:A43. || ➽Package: 4 pieces of plungers and barrels.Neutral packing. || ➽Premium Quality:Our plungers and barrels made of premium strength metal and composite plastic.we have a good air and fuel mixing ability and excellent ability of fuel pump systems,and plunger assembly be inspected reliability and durability in the factory. || ➽Notice:Please you carefully check your vehicle plunger barrel and make sure that the Part number must be completely the same as our description fitment,if you have any problem,please you contact us by email,we will have professional customer service within 24 hours. || ➽Upgrade your engine with the 131151-2720 Fuel Plungers and Barrels. These high-quality diesel parts are designed to optimize fuel delivery, resulting in improved engine performance, increased power, and enhanced fuel efficiency.Experience smooth and reliable operation with the Fuel Plungers and Barrels.
You can express buy:
USD 4.72
11-11-2022
11-11-2022
USD 20.99
07-01-2019
07-01-2019
Diesel Plunger 131151-2720 A43 For MITSUBISHI 6D20
Include in ###:
Cross reference number
Zexel num
Bosch num
Firm num
Name
131151-2720
ME704144 MITSUBISHI
PLUNGER-AND-BARREL ASSY
C 14EM PLUNGER ASSY PL(AD) PL
C 14EM PLUNGER ASSY PL(AD) PL
Information:
Group 2
1 - 6I0347 Bracket2 - 7C6591 Clamp2 - 7C7747 Clamp2 - 4B4274 Washer2 - 9N3388 Screw1 - 6I4813 Clamp Kit1 - 8T1296 Washer2 - 5P4939 Screw1 - 9Y3357 Clamp1 - 1029228 Clamp AssemblyGroup 3
2 - 5P4939 Screw1 - 9Y3357 Clamp1 - 1029228 Clamp AssemblyAction Required
See the attached procedure.
Service Claim Allowances
Parts Disposition
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Attach. (1-Rework Procedure)Rework Procedure
Refer to the following instructions and illustrations. Replace the existing fuel lines and their related parts with the new fuel line groups.
To insure correct clamp locations, install left and right fuel line groups as assembled. However, if clamps are removed, mark locations to insure correct positions when reassembling.
On the 992C Wheel Loader, it is necessary to remove the 6N8322 Air Outlet Tube Assembly to be able to install the right bank fuel line group.
Tighten the fuel line clamp screws to a torque of 2.25 N m (20 lb in). Do not over tighten. Use a 6V6069 Torque Screwdriver or similar tool to tighten the screws.
Group 1 Procedure
1. Clean and paint the new 6I0361 and 7E3539 Fuel Line Groups before proceeding to the job site.A) "Tape Off" the number 3, 5, and 6 fuel lines in the area of the tower clamp. (See Illustration 1 - Part 4 of 5, Section C-C)B) Install 5F2807 Plastic Caps and 2F2990 Plastic Plugs on the ends of the fuel lines.C) Clean and paint the fuel line groups.D) After drying completely, remove the tape. Do not remove the plastic caps and plugs until the fuel lines are ready to be installed on the engine. Transport the fuel line groups in their original boxes.2. Remove all mounting bolts from the fuel line brackets at the aftercooler housing. Except for the tower clamp assembly, new mounting bolts and washers will be used. Keep the washers. The washers may be needed later as spacers.3. A) Disassemble the tower clamp assembly behind the fuel injection pump. The 9Y3356 Clamp and 9Y3359 Clamp As. that form the tower clamp will be reused. (See Illustration 1 - Part 4 of 5, Section C-C)B) Disconnect the 2 line clamps from the 9Y3361 Bracket (Front V Bracket).C) Disconnect the 6 line clamps from the 7E5779 Bracket (Large V Bracket).4. Disconnect all the fuel lines at the fuel injection pump and at the adaptors in the valve cover bases.5. A) Remove the left and right side fuel line groups as separate assemblies.B) Remove the 9Y3361 Bracket (Front V Bracket). Replace it with a new 6I0347 Bracket.6. Remove the plastic caps and plugs from the fuel lines. Set the new 6I0361 Fuel Lines Group (left side) and the new 7E3539 Fuel Lines Group (right side) in place and hand tighten the fuel nuts. (See Illustration 1 - Part 1 of 5). If any of the ends of the individual fuel lines are not square with the bonnets in the fuel injection pump or with the adaptors in the valve cover bases, gently bend the lines
1 - 6I0347 Bracket2 - 7C6591 Clamp2 - 7C7747 Clamp2 - 4B4274 Washer2 - 9N3388 Screw1 - 6I4813 Clamp Kit1 - 8T1296 Washer2 - 5P4939 Screw1 - 9Y3357 Clamp1 - 1029228 Clamp AssemblyGroup 3
2 - 5P4939 Screw1 - 9Y3357 Clamp1 - 1029228 Clamp AssemblyAction Required
See the attached procedure.
Service Claim Allowances
Parts Disposition
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Attach. (1-Rework Procedure)Rework Procedure
Refer to the following instructions and illustrations. Replace the existing fuel lines and their related parts with the new fuel line groups.
To insure correct clamp locations, install left and right fuel line groups as assembled. However, if clamps are removed, mark locations to insure correct positions when reassembling.
On the 992C Wheel Loader, it is necessary to remove the 6N8322 Air Outlet Tube Assembly to be able to install the right bank fuel line group.
Tighten the fuel line clamp screws to a torque of 2.25 N m (20 lb in). Do not over tighten. Use a 6V6069 Torque Screwdriver or similar tool to tighten the screws.
Group 1 Procedure
1. Clean and paint the new 6I0361 and 7E3539 Fuel Line Groups before proceeding to the job site.A) "Tape Off" the number 3, 5, and 6 fuel lines in the area of the tower clamp. (See Illustration 1 - Part 4 of 5, Section C-C)B) Install 5F2807 Plastic Caps and 2F2990 Plastic Plugs on the ends of the fuel lines.C) Clean and paint the fuel line groups.D) After drying completely, remove the tape. Do not remove the plastic caps and plugs until the fuel lines are ready to be installed on the engine. Transport the fuel line groups in their original boxes.2. Remove all mounting bolts from the fuel line brackets at the aftercooler housing. Except for the tower clamp assembly, new mounting bolts and washers will be used. Keep the washers. The washers may be needed later as spacers.3. A) Disassemble the tower clamp assembly behind the fuel injection pump. The 9Y3356 Clamp and 9Y3359 Clamp As. that form the tower clamp will be reused. (See Illustration 1 - Part 4 of 5, Section C-C)B) Disconnect the 2 line clamps from the 9Y3361 Bracket (Front V Bracket).C) Disconnect the 6 line clamps from the 7E5779 Bracket (Large V Bracket).4. Disconnect all the fuel lines at the fuel injection pump and at the adaptors in the valve cover bases.5. A) Remove the left and right side fuel line groups as separate assemblies.B) Remove the 9Y3361 Bracket (Front V Bracket). Replace it with a new 6I0347 Bracket.6. Remove the plastic caps and plugs from the fuel lines. Set the new 6I0361 Fuel Lines Group (left side) and the new 7E3539 Fuel Lines Group (right side) in place and hand tighten the fuel nuts. (See Illustration 1 - Part 1 of 5). If any of the ends of the individual fuel lines are not square with the bonnets in the fuel injection pump or with the adaptors in the valve cover bases, gently bend the lines