130101-4420 ZEXEL 9 443 610 058 BOSCH PLUNGER-AND-BARREL ASSY 9443610058 1301014420 5156320110


 

Information plunger-and-barrel assy

BOSCH 9 443 610 058 9443610058
ZEXEL 130101-4420 1301014420
ISUZU 5156320110 5156320110
130101-4420 PLUNGER-AND-BARREL ASSY
Rating:
77
Buy PLUNGER-AND-BARREL ASSY 130101-4420 zexel genuine, new aftermarket engine parts with delivery

Include in ###:

Number on scheme 30
PLUNGER-AND-BARREL ASSY
1043004151 as PLUNGER-AND-BARREL ASSY
1043004191 as PLUNGER-AND-BARREL ASSY K141
1043004210 as PLUNGER-AND-BARREL ASSY
1043004211 as PLUNGER-AND-BARREL ASSY K141

Cross reference number

Zexel num
Bosch num
Firm num
Name
130101-4420 
9 443 610 058 
K141 
5156320110  ISUZU
PLUNGER-AND-BARREL ASSY
C 14EV PLUNGER ASSY PL(S-K) PL




Information:

The problems in this section are problems that do come about and are normally called "low power." These problems are not necessarily more common than engine problems, but they are possible problems which you need to read and check before an engine is disassembled.Read all of the items but make sure the first three are checked completely before making any engine test. Possible Causes/CorrectionsTachometer Error
To check, connect a tachometer of known accuracy to the engine. Run the engine and make a comparison of the readings of the vehicle and test tachometers. If vehicle tachometer is bad, make repairs as necessary or install a new tachometer.Engine Operated at High Altitude
Less oxygen at higher altitudes causes the engine horsepower to go down. There is no effect on the horsepower of the engine for the first 2280 m (7500 ft) above sea level of operation.Brakes Do Not Completely Release
Check the brakes by feeling all the brake drums. If the brakes of a wheel do not completely release, the brake drum for that wheel will be hotter than the brake drums for the other wheels. With the truck lifted with a jack, the wheels must have free rotation when turned by hand.Extra Engine Driven Equipment
Air compressors, hydraulic pumps, alternator, and other engine driven equipment that has damage, or that was not installed correctly, or that is not in correct adjustment, can take more horsepower to drive than expected. If necessary, disconnect the equipment and test the engine.Speedometer Error
A bad speedometer does not give the correct speed or the correct indication of fuel consumption. An indication of low speed can cause the operator to feel that he has a power problem.Speeds Too High
The need for more horsepower is easy to see as the speed of the vehicle is increased. This is especially true if the front of the vehicle has a large surface area. Application personnel can give you the horsepower necessary for different vehicle designs at different speeds.Overload On Vehicle
Application personnel can give you the horsepower needs for different vehicles.High Moving Resistance
Soft ground conditions cause a need for more horsepower. To see if the problem is the engine, test the vehicle on a surface known to be good, or test on a chassis dynamometer.High Wind Resistance
The horsepower needs for a truck can be divided into two parts. Part of the horsepower is used to move the vehicle and part is used to get through the resistance of the wind. The horsepower necessary to get through the resistance of the wind will increase as the vehicle is used at higher speeds. Vehicles with large front area have a higher wind resistance and take more horsepower than those with a small front area. Some types of trucks, for example those used for the transportation of automobiles and or boats have high wind resistance even if the front area is small. Moving against the wind has the same effect on wind resistance as does higher vehicle speed.Power Loss in Drive Gears
It is possible for a

Have questions with 130101-4420?





Group cross 130101-4420 ZEXEL

Isuzu 

130101-4420  
9 443 610 058 
K141 
5156320110 
PLUNGER-AND-BARREL ASSY
Back to top