140253-3500 ZEXEL 9 411 618 013 BOSCH PLATE 9411618013 1402533500 8972259710

Illustration 4 g01633558
(5) 326-7322 Bracket As (13) 250-3895 Spacer (14) 8T-4896 Hard Washer (15) 4L-6459 Bolt
Install the new 326-7322 Bracket As (5) by using four new 250-3895 Spacers (13), four new 4L-6459 Bolts (15), and four new 8T-4896 Hard Washers (14) in the same place where the muffler was previously installed. Refer to Illustration 4.
Illustration 5 g01633569
(4) 326-7321 Connector As (11) 249-3108 Isolation Mount (12) 7X-0618 Hard Washer (16) 8T-4244 Nut (17) 8T-7930 Bolt (19) 8T-4223 Hard Washer
Install the new 326-7321 Connector As (4) on bracket assembly (5) by using three new 249-3108 Isolation Mounts (11), three new 8T-7930 Bolts (17), six new 7X-0618 Hard Washers (12), three new 8T-4223 Hard Washers (19), and three new 8T-4244 Nuts (16). Refer to Illustration 5.
Illustration 6 g01633576
(2) 326-7333 Brace (7) 326-7334 Brace (11) 249-3108 Isolation Mount (12) 7X-0618 Hard Washer (16) 8T-4244 Nut (18) 8T-4176 Bolt (19) 8T-4223 Hard Washer
Install a new 326-7333 Brace (2) and a new 326-7334 Brace (7) to connector assembly (4) by using two new 249-3108 Isolation Mounts (11), two new 8T-4176 Bolts (18), four new 7X-0618 Hard Washers (12), two new 8T-4223 Hard Washers (19) and two new 8T-4244 Nuts (16). Refer to Illustration 6.
Illustration 7 g01633578
(1) 326-7315 Diesel Particulate Filter Gp
Install the new 326-7315 Diesel Particulate Filter Gp (1) onto connector assembly (4). The weight of the diesel particulate filter group is approximately 72.5 kg (160 lb). Refer to Illustration 7.
Illustration 8 g01633590
(9) 326-7320 Filter Clamp Assembly (16) 8T-4244 Nut (19) 8T-4223 Hard Washer (20) 8T-4910 Bolt
Install two new 326-7320 Filter Clamp As (9) by using eight new 8T-4223 Hard Washers (19), four new 8T-4910 Bolts (20) and four new 8T-4244 Nuts (16). Refer to Illustration 8.
Illustration 9 g01633633
(10) 195-3068 Ejector (22) 5P-0597 Hose Clamp (23) 273-3000 Hose (24) 233-7182 Tube
Install the new 195-3068 Ejector (10) to the diesel particulate filter. Refer to Illustration 9.
Install the new 273-3000 Hose (23), and the new 233-7182 Tube (24) to the ejector by using four new 5P-0597 Hose Clamps (22). Refer to Illustration 9.
Illustration 10 g01633714
(6) 326-7328 Tube As (8) 328-8875 Adaptor As (25) 141-1480 Clamp As (27) 202-1838 V-Band Clamp (28) 243-2973 Bellows
Install the new 326-7328 Tube As (6) to the inlet module tube of the diesel particulate filter by using a new 141-1480 Clamp As (25). Refer to Illustration 10.
Install the new 243-2973 Bellows (28) to tube assembly (6) by using a new 202-1838 V-Band