Information pinion
BOSCH
9 411 618 235
9411618235
ZEXEL
141240-0400
1412400400
ISHIKAWAJIMA-H
121042
121042
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Hacus - Forklift FPE274257 Radiator 4Y 5 Series Hacus Aftermarket - New
Hacus HIGH-QUALITY CONSTRUCTION: Made with premium materials; built to withstand the demands of industrial environments; offering excellent resistance to wear; corrosion; and mechanical stress. || VERSATILE COMPATIBILITY: Engineered to fit a wide range of forklift models; making it a versatile choice for various equipment configurations. || SAFETY FIRST - FPE products are ready for use with all certifications. || LEADING THE INDUSTRY - FPE is a leader in forklift products and accessories. We take pride in making the highest quality, premium, reliable forklifts on the market. || All products tested for durability, reliability, and performance.
Hacus HIGH-QUALITY CONSTRUCTION: Made with premium materials; built to withstand the demands of industrial environments; offering excellent resistance to wear; corrosion; and mechanical stress. || VERSATILE COMPATIBILITY: Engineered to fit a wide range of forklift models; making it a versatile choice for various equipment configurations. || SAFETY FIRST - FPE products are ready for use with all certifications. || LEADING THE INDUSTRY - FPE is a leader in forklift products and accessories. We take pride in making the highest quality, premium, reliable forklifts on the market. || All products tested for durability, reliability, and performance.
SKYJACK 121042, ANGLE - PLATFORM STOP
MRK SALES SKYJACK 121042, ANGLE - PLATFORM STOP || SKYJACK || These are Truck Specific || Only Shown Parts are Included || SKYJACK
MRK SALES SKYJACK 121042, ANGLE - PLATFORM STOP || SKYJACK || These are Truck Specific || Only Shown Parts are Included || SKYJACK
$39.48
04 May 2024
0.08[0.04] pounds
CA: Sowa Tool & Machine
STM 121042 1/2" 82º 3-Flute H.S.S. Countersink
STM Premium Head Diameter (Inch): 1/2" || Number of Flutes: 3 || Included Angle: 82 || Countersink Material: High Speed Steel || Countersink Finish/Coating: Bright
STM Premium Head Diameter (Inch): 1/2" || Number of Flutes: 3 || Included Angle: 82 || Countersink Material: High Speed Steel || Countersink Finish/Coating: Bright
Include in ###:
Cross reference number
Zexel num
Bosch num
Firm num
Name
141240-0400
9 411 618 235
121042 ISHIKAWAJIMA-H
PINION
C 24XX PINION PF parts PF
C 24XX PINION PF parts PF
141240-0400
9 411 618 235
121042 ISHIKAWAJIMA-S
PINION
C 24XX PINION PF parts PF
C 24XX PINION PF parts PF
141240-0400
9 411 618 235
109443A NKK
PINION
C 24XX PINION PF parts PF
C 24XX PINION PF parts PF
141240-0400
9 411 618 235
109443 NIIGATA
PINION
C 24XX PINION PF parts PF
C 24XX PINION PF parts PF
Information:
1. Thoroughly clean the area around each fuel injection line connection before removal of any fuel injection lines. 2. Remove bolts (3) and (5) that fasten the mounting brackets to the cylinder head.3. Disconnect all fuel injection line nuts (2) at the fuel injection pump housing.
Do not let the tops of fuel injection nozzles (4) turn when fuel injection line nuts (6) are tightened. The nozzles will be damaged if the top of the nozzle turns in the body. The engine will be damaged if a defective fuel injection nozzle is used because the shape of fuel (spray pattern) that comes out of the nozzles will not be correct.
4. Use two wrenches, one to hold fuel injection nozzles (4) so they will not turn and one to disconnect fuel injection lines (1) from the nozzles.5. Remove fuel injection lines (1) from the engine. Put caps and plugs on the nozzles, fuel injection lines and fuel injection pump housing to keep dirt from entering the fuel system. The following steps are for installation of the fuel injection lines.6. Make sure the fuel injection lines are clean and dry.7. Put fuel injection lines (1) in position. Install all fuel injection line nuts (2) and (6) until they are finger tighten.8. Use a torque wrench and Tool (A) to tighten all fuel injection line nuts (2) to a torque of 41 7 N m (30 5 lb ft).
Do not let the tops of fuel injection nozzles (4) turn when the fuel injection lines are tightened. The nozzles will be damaged if the top of the nozzle turns in the body. The engine will be damaged if a defective fuel injection nozzle is used because the shape of fuel (spray pattern) that comes out of the nozzles will not be correct.
9. Use a wrench to hold fuel injection nozzles (4) so they will not turn. Use a torque wrench and Tool (A) to tighten all fuel injection line nuts (6) to a torque of 41 7 N m (30 5 lb ft).10. Install bolts (3) and (5) that fasten the mounting brackets to the cylinder head.11. Remove (bleed) the air from the fuel system. See the Operation & Maintenance Manual.
Do not let the tops of fuel injection nozzles (4) turn when fuel injection line nuts (6) are tightened. The nozzles will be damaged if the top of the nozzle turns in the body. The engine will be damaged if a defective fuel injection nozzle is used because the shape of fuel (spray pattern) that comes out of the nozzles will not be correct.
4. Use two wrenches, one to hold fuel injection nozzles (4) so they will not turn and one to disconnect fuel injection lines (1) from the nozzles.5. Remove fuel injection lines (1) from the engine. Put caps and plugs on the nozzles, fuel injection lines and fuel injection pump housing to keep dirt from entering the fuel system. The following steps are for installation of the fuel injection lines.6. Make sure the fuel injection lines are clean and dry.7. Put fuel injection lines (1) in position. Install all fuel injection line nuts (2) and (6) until they are finger tighten.8. Use a torque wrench and Tool (A) to tighten all fuel injection line nuts (2) to a torque of 41 7 N m (30 5 lb ft).
Do not let the tops of fuel injection nozzles (4) turn when the fuel injection lines are tightened. The nozzles will be damaged if the top of the nozzle turns in the body. The engine will be damaged if a defective fuel injection nozzle is used because the shape of fuel (spray pattern) that comes out of the nozzles will not be correct.
9. Use a wrench to hold fuel injection nozzles (4) so they will not turn. Use a torque wrench and Tool (A) to tighten all fuel injection line nuts (6) to a torque of 41 7 N m (30 5 lb ft).10. Install bolts (3) and (5) that fasten the mounting brackets to the cylinder head.11. Remove (bleed) the air from the fuel system. See the Operation & Maintenance Manual.
Have questions with 141240-0400?
Group cross 141240-0400 ZEXEL
Ishikawajima-H
141240-0400
9 411 618 235
121042
PINION
Ishikawajima-S
141240-0400
9 411 618 235
121042
PINION
Nkk
141240-0400
9 411 618 235
109443A
PINION
Niigata
141240-0400
9 411 618 235
109443
PINION