016550-1110 ZEXEL 9 442 612 960 BOSCH O-RING 9442612960 0165501110 0481105110


 

Information o-ring

BOSCH 9 442 612 960 9442612960
ZEXEL 016550-1110 0165501110
KUBOTA 0481105110 0481105110
016550-1110 O-RING
Rating:
77
Buy O-RING 016550-1110 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
016550-1110 
9 442 612 960 
0481105110  KUBOTA
O-RING
D 90HY O RING Standard parts Others
016550-1110 
9 442 612 960 
19423545360  YANMAR
O-RING
D 90HY O RING Standard parts Others
016550-1110 
9 442 612 960 
0481105110  KUBOTA
O-RING
D 90HY O RING Standard parts Others
016550-1110 
9 442 612 960 
08300100101  NEW-CAT-M.BISHI
O-RING
D 90HY O RING Standard parts Others




Information:

Scheduled Oil Sampling (S O S) oil analysis is the best indicator for determining what is happening inside your engine.S O S oil analysis is a diagnostic tool used to determine oil performance and component wear rates. S O S oil analysis uses a series of tests designed to identify and measure contamination such as: * soot, sulfur, etc.* degradation such as the presence of fuel, water and antifreeze in a sample of oil.* the amount of wear metals present in the oil sample.Wear metals present in the oil sample are compared to established Caterpillar norms to determine acceptability. S O S oil analysis must be performed on a continuing basis to be effective as an indicator. Intermittent sampling does not allow wear rate trend lines to be established. Obtain S O S samples at regularly scheduled intervals to monitor the condition and maintenance requirements of your engine. Each oil sample should be taken when the oil is warm and well mixed to ensure that the sample is representative of the oil in the engine crankcase.Consult with your Caterpillar dealer for complete information and assistance in establishing an S O S oil analysis program for your engine(s).S O S Oil Analysis
S O S oil analysis is composed of three basic tests: * Wear Analysis* Chemical and Physical Tests* Oil Condition Analysis Wear analysis is performed with an atomic absorption spectrophotometer to monitor component wear by identifying and measuring concentrations, in parts per million, of wear elements present in the oil. Based on known normal concentration data, maximum limits of wear elements are established. Impending failures can be identified when test results deviate from concentration levels established as acceptable, based on normal wear. Chemical and physical tests detect the presence of water, fuel and glycol (antifreeze) in the oil and determine whether or not their concentrations exceed established maximum limits. Oil condition is evaluated with infrared analysis. This test determines the presence and measures the amount of contaminants such as soot, sulfur products, oxidation, and nitration products in the oil. Infrared analysis can also assist in customizing (reducing, maintaining or extending) oil change intervals for particular conditions and applications.Infrared analysis should always be accompanied by wear element analysis and chemical and physical tests to assure accurate diagnosis. Infrared analysis must be used to determine oil change intervals. Oil analysis must include Infrared (IR) in the analysis.The test results of the oil samples will then be used as a basis for determining the oil change interval for your engine, giving you the ultimate time between oil changes without the risk of engine damage.Refer to PEDP1129, Listen To Your Oil, for information and benefits of S O S oil analysis.

Have questions with 016550-1110?





Group cross 016550-1110 ZEXEL

 
 

Kubota 

016550-1110  
9 442 612 960 
0481105110 
O-RING

Yanmar 

016550-1110  
9 442 612 960 
19423545360 
O-RING

Kubota 

016550-1110  
9 442 612 960 
0481105110 
O-RING

New-Cat-M.Bishi 

016550-1110  
9 442 612 960 
08300100101 
O-RING

Isuzu 

9 442 611 260 
1153490500 
O-RING
 
 

Back to top