Information nozzle and holder assy.
BOSCH
9 430 613 758
9430613758
ZEXEL
105158-5100
1051585100
KOMATSU
F01G0V4002
f01g0v4002
Rating:
Cross reference number
Zexel num
Bosch num
Firm num
Name
Information:
Note: Each CCM will support up to a total of eight lists for all GSC's and ECM's. Each list may contain up to eight PID's. The CCM will support up to 64 parameters. However, the total number of PID's able to be broadcast is limited to 48 per controller. Refer to Operation and Maintenance Manual, SEBU6874, "Programming Examples for M5X Protocol".Note: For the older version of CCM, 117-6170 System Communication Module, the total number of PID's able to be broadcast is limited to 31 per module.IID 15 - Status Reply to IID 11, IID 12, and IID 13
This IID is used in order to indicate the validity of a command message that was just sent to the CCM. A typical IID 15 example is: $5001150100cs.
Table 6
IID 15 - Status Reply to IID 11, IID 12, and IID 13
Byte(s) Description
1-4 Standard preamble (50 xxyyzz)
5 IID sent in response to (11, 12, or 82)
6 Status Reply
$00 = IID data is OK
$10 = Invalid list number (greater than 8 or less than 1)
$20 = List is not programmed
$30 = Faulty checksum or command format
7 Checksum of message followed by an ASCII carriage return ($0D) IID 24
This IID is used in order to indicate the validity of a command message that was just sent to the CCM. A typical IID 15 example is: $5001150100cs.
Table 6
IID 15 - Status Reply to IID 11, IID 12, and IID 13
Byte(s) Description
1-4 Standard preamble (50 xxyyzz)
5 IID sent in response to (11, 12, or 82)
6 Status Reply
$00 = IID data is OK
$10 = Invalid list number (greater than 8 or less than 1)
$20 = List is not programmed
$30 = Faulty checksum or command format
7 Checksum of message followed by an ASCII carriage return ($0D) IID 24