105158-2192 ZEXEL 9 430 610 481 BOSCH NOZZLE AND HOLDER ASSY. 9430610481 1051582192


 

Information nozzle and holder assy.

BOSCH 9 430 610 481 9430610481
ZEXEL 105158-2192 1051582192
105158-2192 NOZZLE AND HOLDER ASSY.
Rating:
24
Buy NOZZLE AND HOLDER ASSY. 105158-2192 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
105158-2192 
105158-2193 
9 430 610 481 
88-1090C 
   
NOZZLE AND HOLDER ASSY.
4FG1 * K 53KP N&NH KDA-P N&NH




Information:

Responsibilities of the Oil Company
Performance - The performance of the oil is the responsibility of the oil company. The oil must maintain stable oil control and the oil must control deposits in the combustion chamber and in the crankcase. Engine service life must be maintained at the predicted stage for the particular engine application.Supply - The supply of the oil is the responsibility of the oil company. If special storage and/or shipping is required, the oil company should cover the cost of those items.Oil and fuel analysis - During the evaluation, the oil company should pay for the cost of the oil and fuel analyses. The oil samples should be analyzed by the local Cat dealer in the S O S Services program. The data that is obtained from the oil analyses must be plotted in order to establish trends. The fuel should be analyzed periodically by an independent laboratory. Results of the oil and fuel analyses must be sent to the engine owner. The owner should review the data. Also, the owner should be allowed to keep records of the data.Hardware - If the oil is evaluated in a used engine, two new sets of these components must be installed before the Field Performance Evaluation: pistons, piston rings and cylinder liners. The cost should be covered by the oil company. These new components will be examined as part of the final inspection.Final Inspection - The cost of the final inspection should be paid by the oil company. The costs of additional downtime can also be part of the cost of inspection. If the final inspection reveals severe deposits and/or damage to the hardware, the oil company must make the repairs that are necessary for restoring the engine to an acceptable condition.End of the Evaluation - After completion of the Field Performance Evaluation, the oil company should work with the engine owner in order to restore the engine to normal operation. If the Field Performance Evaluation is not completed, the same conditions should be applicable. The oil company should bear the cost of the restoration. The cost includes the removal of storage tanks, special piping, flow meters, and instrumentation.Final Report - the oil company must prepare a final report that documents the following items:
Initial oil consumption and final oil consumption
The data on oil consumption must be recorded on a minimum schedule of every week. A chart of the data must be included in the final report.
Results of oil analyses
Oil changes
Replacement of oil filters
Results of fuel analyses
Fuel consumption or power output
Average engine speed (rpm)
The typical duty cycle
Close up photographs of the following components from two cylinders must also be included: pistons, piston rings before removal and after removal, piston rings after removal, cylinder liners, crankcase, top deck of the cylinder head, bottom deck of the cylinder head, inlet valves and exhaust valves.The final report should be confidential. The final report should be made available to the engine owner.Responsibilities of the Engine Owner
Engine for the Evaluation - The owner must

Have questions with 105158-2192?





Group cross 105158-2192 ZEXEL

Isuzu 

9 430 610 475 
88-1032 
8944181620 
NOZZLE AND HOLDER ASSY.
4FC1J-T
9 430 610 476 
88-1042 
8944181640 
NOZZLE AND HOLDER ASSY.
4FC1J
9 430 610 477 
88-1070 
8944280020 
NOZZLE AND HOLDER ASSY.
4EC1
9 430 613 198 
88-1070 
8944280021 
NOZZLE AND HOLDER ASSY.
4EC1
9 430 610 478 
88-1070 
8944280010 
NOZZLE AND HOLDER ASSY.
4EC1
9 430 613 431 
 
NOZZLE AND HOLDER ASSY.

Isuzu 

9 430 613 199 
8944280011 
NOZZLE AND HOLDER ASSY.
4EC1
9 430 613 200 
8944600010 
NOZZLE AND HOLDER ASSY.
4FC1-J
9 430 613 201 
88-1080A 
8944600020 
NOZZLE AND HOLDER ASSY.
4FC1-J
9 430 610 101 
88-1090 
8944591420 
NOZZLE AND HOLDER ASSY.
4FC1-T
9 430 610 117 
 
NOZZLE AND HOLDER ASSY.
9 430 610 136 
88-1090 
 
NOZZLE AND HOLDER ASSY.
4FC1-T

Isuzu 

9 430 613 701 
88-1090 
8944591421 
NOZZLE AND HOLDER ASSY.
4FC1-T
9 430 610 073 
88-1090A 
8944600040 
NOZZLE AND HOLDER ASSY.
4FC1-T
9 430 610 137 
88-1090 
 
NOZZLE AND HOLDER ASSY.
4FC1-T

Isuzu 

9 430 613 598 
88-1090 
8944600041 
NOZZLE AND HOLDER ASSY.
4FC1-T
9 430 610 089 
88-1100 
8944704990 
NOZZLE AND HOLDER ASSY.
4FG1
9 430 610 479 
88-1090C 
 
NOZZLE AND HOLDER ASSY.
4FG1

Isuzu 

9 430 613 705 
C88-1090 
8944704991 
NOZZLE AND HOLDER ASSY.
4FG1
9 430 610 480 
88-1100A 
8944490790 
NOZZLE AND HOLDER ASSY.
4FG1
9 430 613 432 
 
NOZZLE AND HOLDER ASSY.
105158-2192  

105158-2193 
9 430 610 481 
88-1090C 
 
NOZZLE AND HOLDER ASSY.
4FG1

Isuzu 

9 430 613 706 
C88-1090 
8944490791 
NOZZLE AND HOLDER ASSY.
4FG1
Back to top