Information nozzle and holder assy.
BOSCH
9 430 610 386
9430610386
ZEXEL
105141-2880
1051412880
NISSAN
166001C300
166001c300
Rating:
Cross reference number
Zexel num
Bosch num
Firm num
Name
105141-2880
166001C300 NISSAN
NOZZLE AND HOLDER ASSY.
XM3T K 53KG NOZZLE & HOLDER ASSY N&NH KCA-S N&NH
XM3T K 53KG NOZZLE & HOLDER ASSY N&NH KCA-S N&NH
Information:
Start By:a. remove oil pump1. Check the main bearing caps for identification for their location and direction in the block. The caps must be installed in the same location and direction from which they were removed. 2. Remove No. 2 through No. 6 bearing caps (1). Remove thrust plates from the No. 4 main bearing.
If the crankshaft is turned in the wrong direction, the tab of the bearing will be pushed between the crankshaft and cylinder block. This can cause damage to either the crankshaft or cylinder block or both.
3. Remove the upper halves of the main bearings by putting tool (A) in oil hole (2) in the crankshaft. Turn the crankshaft in the direction which will push the
If the crankshaft is turned in the wrong direction, the tab of the bearing will be pushed between the crankshaft and cylinder block. This can cause damage to either the crankshaft or cylinder block or both.
3. Remove the upper halves of the main bearings by putting tool (A) in oil hole (2) in the crankshaft. Turn the crankshaft in the direction which will push the