105124-5020 ZEXEL 9 430 610 268 BOSCH NOZZLE AND HOLDER ASSY. 9430610268 1051245020


 

Information nozzle and holder assy.

BOSCH 9 430 610 268 9430610268
ZEXEL 105124-5020 1051245020
105124-5020 NOZZLE AND HOLDER ASSY.
Rating:
12
Buy NOZZLE AND HOLDER ASSY. 105124-5020 zexel genuine, new aftermarket engine parts with delivery

Include in #2:

104058-3410 as NOZZLE AND HOLDER ASSY

Cross reference number

Zexel num
Bosch num
Firm num
Name
105124-5020 
9 430 610 268 
54-2000 
   
NOZZLE AND HOLDER ASSY.
DS28 K




Information:

Your truck/engine may not have the same or all of the gauges as shown in the illustrations. The illustrations shown are of typical gauges.Gauges provide a "look" inside the engine. Be sure they are in good working order. You can determine what is the "normal" operating range by observing your gauges over a period of time.Noticeable changes in gauge readings are an indication of potential gauge or engine problems. This also applies to gauge readings that have changed significantly but are still within specifications. The cause of any sudden or significant change in the readings should be determined and corrected. Contact your Caterpillar dealer for assistance as needed.
If no oil pressure is indicated, stop the engine. Engine damage can result.
Oil Pressure - Typical oil pressure range is 30 and 45 psi (207 and 310 kPa) (running at rated engine speed, with SAE 15W-40 oil, at operating temperature). A lower pressure is normal at low idle. Water Temperature - Typical water temperature range is 189° to 208°F (87° to 98°C). Maximum allowable temperature is 216°F (102°C) with the cooling system pressurized. Somewhat higher temperatures may occur under certain conditions. Ammeter - Indicates the amount of charge or discharge in the battery charging circuit. Typical operation of the indicator should be slightly to the positive (right) side of "0" (zero).With the engine running, during normal operation, if the indicator is constantly to the negative (left) side of "0" (zero) or shows excessive charge, have the charging system checked for malfunction.
Do not exceed 2300 rpm in any situation.
Tachometer - Indicates engine rpm (speed). The engine can be operated at high idle without damage, but should not be allowed to overspeed. Overspeeding when downshifting, going downhill, etc., can result in serious damage to your engine. Fuel Level - Indicates fuel level in the fuel tank. Electrically operated, it registers only when the key switch is ON.
A drop in fuel pressure usually indicates a dirty or plugged fuel filter.
Fuel Pressure - Indicates fuel pressure to the unit injectors. The indicator (if equipped) should register in the NORMAL (green) range. Typical fuel pressure at low idle is 60 psi (410 kPa) and at TEL (Top Engine Limit), 80 psi (550 kPa).

Have questions with 105124-5020?





Group cross 105124-5020 ZEXEL

 
 
NOZZLE AND HOLDER ASSY.
105124-5020  
9 430 610 268 
54-2000 
 
NOZZLE AND HOLDER ASSY.
DS28
9 430 610 269 
54-4160 
 
NOZZLE AND HOLDER ASSY.
DS32
 
 
NOZZLE AND HOLDER ASSY.

Daihatsu 

9 430 610 270 
54-2000A 
E286200280Z 
NOZZLE AND HOLDER ASSY.
DS28
9 430 613 196 
 
NOZZLE AND HOLDER ASSY.
DS28
9 430 610 271 
54-4160A 
E646200300ZZ 
NOZZLE AND HOLDER ASSY.
6DV-32
Back to top