105118-7990 ZEXEL 9 430 613 212 BOSCH NOZZLE AND HOLDER ASSY. 9430613212 1051187990


 

Information nozzle and holder assy.

BOSCH 9 430 613 212 9430613212
ZEXEL 105118-7990 1051187990
105118-7990 NOZZLE AND HOLDER ASSY.
Rating:
22
Buy NOZZLE AND HOLDER ASSY. 105118-7990 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
105118-7990 
105118-7991 
9 430 613 212 
   
NOZZLE AND HOLDER ASSY.
V2203-DI * K




Information:

Replace:
Thrust, Main and Rod Bearings, Valve Rotators, Thermostat and Throttle Position SensorIn most probability, these components will not last until the second overhaul. Therefore, Caterpillar recommends the installation of these components new at each overhaul period.Inspect:
Crankshaft, Camshaft, Camshaft Followers, Vibration Damper, Spacer Block, Oil Pump and Fuel Transfer PumpThe ideal time for inspecting your crankshaft, camshaft and vibration damper is while the engine is disassembled for overhaul. Inspect each component for potential damage as follows:Crankshaft - Inspect for bend, journal damage and bearing material seized to the journal. At the same time, check the taper and profile of the crankshaft journals by interpreting your main and rod bearing wear patterns. In case of an out-of-frame overhaul, use the magnetic particle inspection process to check the crankshaft for cracks.* Camshaft - Inspect the camshaft for journal damage. In case of an out-of-frame overhaul, use the magnetic particle inspection process to check the camshaft for cracks.* Camshaft Followers - For out-of-frame overhaul, inspect the cam bearing for fatigue and wear.* Vibration Damper - Inspect the damper for rubber deterioration and movement of the outer ring relative to the inner hub.* Spacer Block - Inspect the spacer block for excessive wear or warping. For additional information regarding these components, contact your local Caterpillar dealer for assistance.Test:
Electronic Unit Injectors For additional information regarding this component, contact your local Caterpillar dealer for assistance.Clean/Test:
Oil Cooler Core and Aftercooler CoreCaterpillar recommends that the oil cooler core and the air-to-air aftercooler core be cleaned and pressure tested at each overhaul. For additional specifications and/or pressure test information, contact your local Caterpillar dealer.Cleaning Procedure for Air-to-Air Aftercooler
Caterpillar recommends that the air-to-air aftercooler core be removed, cleaned, and tested at overhaul time, if a turbocharger failure has occurred, or if at any time the turbocharger develops an oil leak.To clean the air-to-air aftercooler system:1. Remove the air-to-air aftercooler core. Turn the core upside down to remove debris from the inlet tank.
Do not use caustic cleaners to clean the air-to-air aftercooler core. Caustic cleaners will attack the internal metals of the core and cause leakage.
2. Back flush internally with a solvent to loosen foreign substances and to remove oil.Caterpillar recommends the use of Caterpillar Hydrosolv 4165 or Hydrosolv 100 Liquid Cleaners. For more information see "General Instructions and Application Guide" Form LEHQ6101 or contact your Caterpillar dealer.3. Shake the core vigorously to eliminate any trapped debris.4. Wash the core with hot, soapy water. Rinse thoroughly with clean water.
The maximum air pressure must not be above 30 psi (205 kPa) for cleaning purposes.
5. Dry the core with compressed air. Blow air in reverse direction of normal flow. Use all necessary safety equipment while using compressed air.6. Inspect the system to ensure cleanliness and install the air-to-air aftercooler core.Caterpillar Recommendation
The "repair before failure" concept makes sense. It saves money, lowers operating costs and minimizes downtime.As previously illustrated, it is not cheaper to operate the truck until an engine component fails, since failing components may increase fuel costs and upon failure, could

Have questions with 105118-7990?





Group cross 105118-7990 ZEXEL

Isuzu 

9 430 613 203 
48-4300G 
8972266800 
NOZZLE AND HOLDER ASSY.
4HG1
9 430 613 204 
48-4300L 
8972266801 
NOZZLE AND HOLDER ASSY.
4HG1

Nissan 

9 430 612 757 
48-4120G 
16600VG100 
NOZZLE AND HOLDER ASSY.
ZDETI
9 430 613 608 
48-4120T or U 
 
NOZZLE AND HOLDER ASSY.

Nissan 

9 430 613 608 
48-4120T or U 
16600VG101 
NOZZLE AND HOLDER ASSY.
F 01G 09X 003 
48-4120 
16600VG101 
NOZZLE AND HOLDER ASSY.
ZDETI
9 430 613 205 
48-4390G 
16600WD025 
NOZZLE AND HOLDER ASSY.
YD22DD
9 430 613 407 
48-4100 
 
NOZZLE AND HOLDER ASSY.

Nissan 

9 430 613 206 
48-4391XY 
166005M311 
NOZZLE AND HOLDER ASSY.
YD1ET
9 430 613 408 
 
NOZZLE AND HOLDER ASSY.
9 430 613 207 
48-4260B 
F00HN37202 
NOZZLE AND HOLDER ASSY.

Isuzu 

9 430 613 208 
48-4300H 
8972355390 
NOZZLE AND HOLDER ASSY.
4HF1
9 430 613 209 
48-4300J 
8972355400 
NOZZLE AND HOLDER ASSY.
4HG1
9 430 613 210 
48-4300K 
8972355410 
NOZZLE AND HOLDER ASSY.
4HK1

Nissan 

9 430 613 211 
16600VG225 
NOZZLE AND HOLDER ASSY.
ZD30ETI
9 430 613 871 
48-4120G or H 
16600VG226 
NOZZLE AND HOLDER ASSY.
ZD30ETI
9 430 613 871 
48-4120G or H 
A6600VG226 
NOZZLE AND HOLDER ASSY.
ZD30ETI
F 01G 09X 03R 
48-4120 
16600VG226 
NOZZLE AND HOLDER ASSY.
F 01G 09X 03R 
48-4120 
A6600VG226 
NOZZLE AND HOLDER ASSY.
105118-7990  

105118-7991 
9 430 613 212 
 
NOZZLE AND HOLDER ASSY.
V2203-DI

Kubota 

9 430 613 748 
1G79053001 
NOZZLE AND HOLDER ASSY.
V2203-DI
Back to top