105118-7782 ZEXEL 9 430 613 988 BOSCH NOZZLE AND HOLDER ASSY. 9430613988 1051187782 me203537


 

Information nozzle and holder assy.

BOSCH 9 430 613 988 9430613988
ZEXEL 105118-7782 1051187782
MITSUBISHI ME203537 me203537
105118-7782 NOZZLE AND HOLDER ASSY.
Rating:
82
Buy NOZZLE AND HOLDER ASSY. 105118-7782 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
105118-7782 
9 430 613 988 
ME203537  MITSUBISHI
NOZZLE AND HOLDER ASSY.
4M41TC K




Information:

Starting From External Electrical Source
Always wear protective glasses when working with batteries.Do not allow the free end of booster cables to make contact with each other or touch the engine. This will help prevent sparks near the batteries.Batteries give off flammable fumes that can explode.Do not smoke when observing the battery electrolyte levels.Electrolyte is an acid and can cause personal injury if it contacts skin or eyes.
Be sure the main power switch is in the OFF position before attaching the booster cables to the engine being started. When using booster cables, be sure to connect in parallel: POSITIVE (+) to POSITIVE (+) and NEGATIVE (-) to NEGATIVE (-).Use only equal voltage for boost starting. The use of a welder or higher voltage will damage the electrical system.
Engines without engine-to-frame ground straps can be damaged by electrical discharge.To prevent electrical discharge damage, check to make sure there is an engine-to-frame ground strap. For engines which have the alternator connected to an engine component, the ground strap must connect that component to the frame.Some engines have starter-to-frame ground straps. But, many of these starters are not electrically grounded to the engine. They have electrical insulation systems. For this reason, the starter-to-frame ground strap may not be an acceptable ground.Connect one end of cable to the POSITIVE (+) (ungrounded) terminal of the battery on the engine being started. Connect the other end to the POSITIVE (+) terminal of the power source.Connect one end of the second cable to the NEGATIVE (-) terminal of the power source. Connect the other end to the frame of the engine to be started.Turn the start switch on and start the engine.Disconnect the cable from the frame first. Disconnect the other end from the NEGATIVE (-) terminal of the power source. Disconnect the cable from the POSITIVE (+) terminal of the battery. Disconnect the other end from the POSITIVE (+) terminal of the power source.

Have questions with 105118-7782?





Group cross 105118-7782 ZEXEL

Nissan-Diesel 

9 430 610 231 
48-4360H7 
16600Z5712 
NOZZLE AND HOLDER ASSY.
FE6TA
9 430 610 232 
48-4370M9 
16600Z6008 
NOZZLE AND HOLDER ASSY.
MD92
9 430 610 233 
48-2230A 
 
NOZZLE AND HOLDER ASSY.
4JA1L

Isuzu 

9 430 613 945 
48-2231A 
8972176420 
NOZZLE AND HOLDER ASSY.
4JA1L
9 430 613 959 
48-2231A 
8973829460 
NOZZLE AND HOLDER ASSY.
4JA1L
9 430 610 234 
48-2240B 
8972207430 
NOZZLE AND HOLDER ASSY.
4JA1L

Nissan 

9 430 610 235 
48-4100G or H 
16600WD001 
NOZZLE AND HOLDER ASSY.
YD1E

Isuzu 

9 430 613 068 
48-2250C 
8971952580 
NOZZLE AND HOLDER ASSY.
P646B

Nissan 

9 430 610 236 
48-4120S or L 
166002W225 
NOZZLE AND HOLDER ASSY.
ZD30DDTI
9 430 610 237 
48-432037 
 
NOZZLE AND HOLDER ASSY.
4M41TC
9 430 613 744 
48-4320 37 
 
NOZZLE AND HOLDER ASSY.

Mitsubishi 

105118-7782  
9 430 613 988 
ME203537 
NOZZLE AND HOLDER ASSY.
4M41TC
9 430 610 238 
48-4390G or H 
 
NOZZLE AND HOLDER ASSY.

Nissan 

9 430 613 083 
48-4391G or H 
16600WD002 
NOZZLE AND HOLDER ASSY.
YD1E
Back to top