105118-6320 ZEXEL 9 430 612 651 BOSCH NOZZLE AND HOLDER ASSY. 9430612651 1051186320


 

Information nozzle and holder assy.

BOSCH 9 430 612 651 9430612651
ZEXEL 105118-6320 1051186320
105118-6320 NOZZLE AND HOLDER ASSY.
Rating:
35
Buy NOZZLE AND HOLDER ASSY. 105118-6320 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
105118-6320 
105118-6321 
9 430 612 651 
48-4040E 
   
NOZZLE AND HOLDER ASSY.
* K




Information:

The problems in this section are problems that do come about and are normally called "low power." These problems are not necessarily more common than engine problems, but they are possible problems which you need to read and check before an engine is disassembled.Read all of the items but make sure the first three are checked completely before making any engine test.Possible Causes/Corrections
Tachometer Error/To check, connect a tachometer of known accuracy to the engine. Run the engine and make a comparison of the readings of the vehicle and test tachometers. If vehicle tachometer is bad, make repairs as necessary or install a new tachometer. Engine Operated at High Altitude/Less oxygen at higher altitudes causes the engine horsepower to go down. There is no effect on the horsepower of the engine for the first 2280 m (7500 ft.) above sea level of operation. Brakes Do Not Completely Release/Check the brakes by feeling all the brake drums. If the brakes of a wheel do not completely release, the brake drum for that wheel will be hotter than the brake drums for the other wheels. With the truck lifted with a jack, the wheels must have free rotation when turned by hand. Extra Engine Driven Equipment/Air compressors, hydraulic pumps, alternator, and other engine driven equipment that has damage, or that was not installed correctly, or that is not in correct adjustment, can take more horsepower to drive than expected. If necessary, disconnect the equipment and test the engine. Speedometer Error/A bad speedometer does not give the correct speed or the correct indication of fuel consumption. An indication of low speed can cause the operator to feel that he has a power problem. Speeds Too High/The need for more horsepower is easy to see as the speed of the vehicle is increased. This is especially true if the front of the vehicle has a large surface area. Application personnel can give you the horsepower necessary for different vehicle designs at different speeds. Overload on Vehicle/Application personnel can give you the horsepower needs for different vehicles. High Moving Resistance/Soft ground conditions cause a need for more horsepower. To see if the problem is the engine, test the vehicle on a surface known to be good, or test on a chassis dynamometer. High Wind Resistance/The horsepower needs for a truck can be divided into two parts. Part of the horsepower is used to move the vehicle and part is used to get through the resistance of the wind. The horsepower necessary to get through the resistance of the wind will increase as the vehicle is used at higher speeds. Vehicles with large front area have a higher wind resistance and take more horsepower than those with a small front area. Some types of trucks, for example those used for the transportation of automobiles and/or boats have high wind resistance even if the front area is small. Moving against the wind has the same effect on wind resistance as does higher vehicle speed. Power Loss

Have questions with 105118-6320?





Group cross 105118-6320 ZEXEL

9 430 612 647 
48-4040B 
 
NOZZLE AND HOLDER ASSY.

Mazda 

9 430 612 648 
48-4041B 
TF3213H50B 
NOZZLE AND HOLDER ASSY.
TF
9 430 612 649 
40-4040C 
 
NOZZLE AND HOLDER ASSY.

Mazda 

9 430 612 650 
48-4041C 
TF3313H50A 
NOZZLE AND HOLDER ASSY.
TF
105118-6320  

105118-6321 
9 430 612 651 
48-4040E 
 
NOZZLE AND HOLDER ASSY.

Mazda 

9 430 612 652 
48-4041E 
TF6013H50A 
NOZZLE AND HOLDER ASSY.
TF
9 430 612 653 
48-4040F 
 
NOZZLE AND HOLDER ASSY.

Mazda 

9 430 612 654 
48-4041F 
TF7013H50B 
NOZZLE AND HOLDER ASSY.
TF

Mitsubishi 

9 430 613 117 
ME6H6001 
NOZZLE AND HOLDER ASSY.
6D34T1

Nissan-Diesel 

9 430 612 655 
48-4050 
1660090103 
NOZZLE AND HOLDER ASSY.
BD3005

Dpico 

9 430 613 118 
 
NOZZLE AND HOLDER ASSY.
SL-TCI

Isuzu 

9 430 612 656 
48-3673G 
8971449970 
NOZZLE AND HOLDER ASSY.
4HJ1

Nissan 

9 430 612 656 
48-3673G 
1660089TA5 
NOZZLE AND HOLDER ASSY.
4HJ1

Isuzu 

9 430 612 657 
48-3673L 
8971449971 
NOZZLE AND HOLDER ASSY.
4HJ1

Nissan 

9 430 612 657 
48-3673L 
1660089TA6 
NOZZLE AND HOLDER ASSY.
4HJ1

Komatsu 

9 430 612 658 
48-3300U 
6206133500 
NOZZLE AND HOLDER ASSY.
6D95L
Back to top