Information nozzle and holder assy.
BOSCH
9 430 612 625
9430612625
ZEXEL
105118-6041
1051186041
ISUZU
8971198110
8971198110
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
shsiyayh 1X Fuel Injector for Isuzu Engine 4HG1 9430612625 8-97119811-0
shsiyayh Part Name:Fuel Injector || Part Number:9430612625 8-97119811-0 8971198110 || APPlication: Compatible with Isuzu Engine 4HG1 || 1.Please tell us of your engine model or a view of nameplate when order this item to lower the error rate.Thanks. || 2.There are no instructions included in this kit.it is recommended to install professionally.
shsiyayh Part Name:Fuel Injector || Part Number:9430612625 8-97119811-0 8971198110 || APPlication: Compatible with Isuzu Engine 4HG1 || 1.Please tell us of your engine model or a view of nameplate when order this item to lower the error rate.Thanks. || 2.There are no instructions included in this kit.it is recommended to install professionally.
$178.22
27 Sep 2024
0.1102[0.05] Pounds
CN: apple uu
LAAAZY Inyector Common Rail Engine Fuel Injector Assembly, Compatible For Isuzu 4HF1 4HG1 Diesel 8971198110 8-97119811-0
LAAAZY Compatible For Isuzu 4HF1 4HG1 Diesel 8971198110 8-97119811-0 || Replacement of injector parts allows the engine to receive a more appropriate fuel supply and a smoother and faster acceleration process, thus shortening the acceleration time. || The injector can automatically control the amount and timing of fuel according to the load and speed of the engine to optimize fuel, thus effectively reducing fuel consumption. || The fuel injector is made with precision equipment and technology to spray the fuel into the cylinder in a better atomized state and improve the fuel combustion efficiency. || Regular inspection and maintenance of fuel injectors and timely replacement of parts can save fuel costs for the vehicle, improve driving efficiency, and at the same time prolong the service life of the engine.
LAAAZY Compatible For Isuzu 4HF1 4HG1 Diesel 8971198110 8-97119811-0 || Replacement of injector parts allows the engine to receive a more appropriate fuel supply and a smoother and faster acceleration process, thus shortening the acceleration time. || The injector can automatically control the amount and timing of fuel according to the load and speed of the engine to optimize fuel, thus effectively reducing fuel consumption. || The fuel injector is made with precision equipment and technology to spray the fuel into the cylinder in a better atomized state and improve the fuel combustion efficiency. || Regular inspection and maintenance of fuel injectors and timely replacement of parts can save fuel costs for the vehicle, improve driving efficiency, and at the same time prolong the service life of the engine.
$188.44
27 Sep 2024
0.1102[0.05] pounds
CN: yingzih0316082
XQXCKYDK Inyector Common Rail Fuel Injector Assembly Compatible with Isuzu 4HF1 4HG1 Diesel Engine 8971198110 8-97119811-0
XQXCKYDK Part name: Fuel injector || Material type: High speed steel || Fuel injector number: 8971198110 8-97119811-0 || Features and advantages: high precision, airtight sealing, small size || Power improvement, fast ignition, more complete combustion, and reduced fuel consumption
XQXCKYDK Part name: Fuel injector || Material type: High speed steel || Fuel injector number: 8971198110 8-97119811-0 || Features and advantages: high precision, airtight sealing, small size || Power improvement, fast ignition, more complete combustion, and reduced fuel consumption
Include in #1:
101401-4780
as NOZZLE AND HOLDER ASSY
Cross reference number
Information:
START BY:a. disassemble governorb. remove fuel injection pumps 1. Remove rack (1) from the fuel pump housing. 2. Remove six lifters (2) from the fuel pump housing. Put identification marks on the lifters for installation purposes. 3. Remove camshaft (3) from the fuel pump housing. It may be necessary to use a soft hammer to push the camshaft out of the governor end of the fuel pump housing. 4. Remove races (4) and bearing (5) from the camshaft. Remove ring (6) if necessary. 5. Remove rack bearing (7) from both ends of the housing and dowel (8) if necessary. 6. Use tooling (A), and remove three camshaft bearings (9). 7. Remove the bolts, cover (10) and the gasket. 8. Remove pins (12), the seal and dowels (11) if necessary. Pins (12) must be pushed from the inside out.Assemble Fuel Injection Pump Housing
1. Clean and inspect all parts. Make a replacement of all parts that are worn or damaged. 2. Lubricate the seal with clean engine oil, and install pin (1). Pin (1) must protrude into the pump bore 2.15 .05 mm (.085 .002 in.).3. Install dowel (2) so that it protrudes into the pump bore 1.93 0.05 mm (.076 .002 in.). 4. Install the gasket, cover (3) and the bolts. 5. Install the rack bearing with tooling (A). Install the bearing until the driver comes in contact with the plate. The bearing should be installed to a depth of 83.0 0.5 mm (3.27 .02 in.) from the fuel pump mounting face. 6. Measure rack bearing (4). Dimension (X) must be 11.178 0.05 mm (.4400 .002 in.). Diameter (W) must be 12.767 0.058 mm (.5026 .0022 in.). 7. Install dowel (5). Dowel (5) must protrude 6.0 0.5 mm (.24 .02 in.) from the fuel pump housing face.8. Install the rear rack bearing with tooling (B) to a depth of 7.16 0.13 mm (.282 .005 in.) below the fuel pump housing surface. The inside diameter of the rear rack bearing must be 12.746 0.045 mm (.5018 .0017 in.). 9. Use tooling (C), and install three camshaft bearings (6). Oil holes (7) in the camshaft bearings must be positioned 30° 3° above the horizontal centerline toward the engine side of the fuel pump housing. The outer bearings must be installed 1.0 0.5 mm (0.04 0.02 in.) below the surface marked (Z). The inner bearing must be installed 218.0 0.3 mm (8.58 .012 in.) below the front surface (Y). Diameter (XX) must be 68.339 0.038 mm (2.6905 .0015 in.) after assembly. 10. Install ring (8), races (10) and bearing (9) on the camshaft. 11. Lubricate cam bearings (6) and the camshaft bearing journals with clean engine oil.12. Install camshaft (11) into the fuel pump housing.
The notch in the lifter must be in line with the dowel in the lifter bore. The lifter must slide up and down freely in
1. Clean and inspect all parts. Make a replacement of all parts that are worn or damaged. 2. Lubricate the seal with clean engine oil, and install pin (1). Pin (1) must protrude into the pump bore 2.15 .05 mm (.085 .002 in.).3. Install dowel (2) so that it protrudes into the pump bore 1.93 0.05 mm (.076 .002 in.). 4. Install the gasket, cover (3) and the bolts. 5. Install the rack bearing with tooling (A). Install the bearing until the driver comes in contact with the plate. The bearing should be installed to a depth of 83.0 0.5 mm (3.27 .02 in.) from the fuel pump mounting face. 6. Measure rack bearing (4). Dimension (X) must be 11.178 0.05 mm (.4400 .002 in.). Diameter (W) must be 12.767 0.058 mm (.5026 .0022 in.). 7. Install dowel (5). Dowel (5) must protrude 6.0 0.5 mm (.24 .02 in.) from the fuel pump housing face.8. Install the rear rack bearing with tooling (B) to a depth of 7.16 0.13 mm (.282 .005 in.) below the fuel pump housing surface. The inside diameter of the rear rack bearing must be 12.746 0.045 mm (.5018 .0017 in.). 9. Use tooling (C), and install three camshaft bearings (6). Oil holes (7) in the camshaft bearings must be positioned 30° 3° above the horizontal centerline toward the engine side of the fuel pump housing. The outer bearings must be installed 1.0 0.5 mm (0.04 0.02 in.) below the surface marked (Z). The inner bearing must be installed 218.0 0.3 mm (8.58 .012 in.) below the front surface (Y). Diameter (XX) must be 68.339 0.038 mm (2.6905 .0015 in.) after assembly. 10. Install ring (8), races (10) and bearing (9) on the camshaft. 11. Lubricate cam bearings (6) and the camshaft bearing journals with clean engine oil.12. Install camshaft (11) into the fuel pump housing.
The notch in the lifter must be in line with the dowel in the lifter bore. The lifter must slide up and down freely in