105118-5010 ZEXEL 9 430 612 510 BOSCH NOZZLE AND HOLDER ASSY. 9430612510 1051185010 1153002480


 

Information nozzle and holder assy.

BOSCH 9 430 612 510 9430612510
ZEXEL 105118-5010 1051185010
ISUZU 1153002480 1153002480
105118-5010 NOZZLE AND HOLDER ASSY.
Rating:
12
Buy NOZZLE AND HOLDER ASSY. 105118-5010 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
105118-5010 
105118-5011 
9 430 612 510 
48-3520 
1153002480  ISUZU
NOZZLE AND HOLDER ASSY.
6BG1 * K




Information:


Do not disconnect the air line from the air compressor governor until the air pressure is zero.
2. If the engine is in chassis, disconnect the air line from fitting (1).3. Remove bolts (3). Remove air compressor governor (2).Install Air Compressor Governor
1. Put air compressor governor (1) in position on the air compressor. Install the bolts that hold it.2. If the engine is in chassis, connect the air line to the fitting on the air compressor governor.Disassemble Air Compressor Governor
start by:a) remove air compressor governor 1. Remove cover (1) from governor. 2. Remove retainer ring (2) with tool (A). Remove spring assembly (3) from the governor housing. Before spring assembly (3) is disassembled, put a mark on bolt (6) to show the location of nut (11) for the correct spring tension at assembly.3. Remove nut (11), washer (9), retainer (7), grommets (4) and (8), spacer (10) and bolt (6) from spring (5). 4. Remove valve (12), spring (13), sleeve (14), valve (15) and spring (16) from the governor housing (17). Remove O-ring seals (18) from the sleeve. Remove the O-ring seals (18) from the sleeve. Remove the O-ring seal from the bore of the sleeve.5. Remove plugs (19) from the governor housing. Remove the filters from under the plugs.Assemble Air Compressor Governor
1. Put new filters in the governor housing and install plugs (1).2. Install O-ring seals (7) on the sleeve. Install the O-ring seal in the bore of the sleeve.3. Install spring (2), valve (6), sleeve (3), spring (4) and valve (5) in the governor housing. 4. Install grommet (13), spacer (14) and grommet (15) on bolt (11). Install bolt assembly in spring (8). Install retainer (9), washer (10) and nut (12) on the bolt. Tighten the nut to the mark on the bolt for the correct spring tension. 5. Install spring assembly (16) in the governor housing. Use tool (A) to install retainer ring (17). Install the cover on the housing.end by:a) install air compressor governor

Have questions with 105118-5010?





Group cross 105118-5010 ZEXEL

Isuzu 

9 430 612 509 
48-3510 
8943970540 
NOZZLE AND HOLDER ASSY.
6HE1
105118-5010  

105118-5011 
9 430 612 510 
48-3520 
1153002480 
NOZZLE AND HOLDER ASSY.
6BG1
9 430 613 380 
 
NOZZLE AND HOLDER ASSY.

Isuzu 

9 430 612 511 
48-3861B 
1153002831 
NOZZLE AND HOLDER ASSY.
6BG1
9 430 612 512 
48-3862B 
1153002832 
NOZZLE AND HOLDER ASSY.
6BG1
9 430 612 513 
48-3520A 
1153002490 
NOZZLE AND HOLDER ASSY.
6BG1TC
9 430 613 381 
 
NOZZLE AND HOLDER ASSY.

Isuzu 

9 430 612 514 
48-3861C 
1153002491 
NOZZLE AND HOLDER ASSY.
6BG1TC
9 430 613 326 
1153002492 
NOZZLE AND HOLDER ASSY.
6BG1TC
9 430 612 515 
48-3530 
 
NOZZLE AND HOLDER ASSY.

Mitsubishi 

9 430 612 516 
48-3590B 
ME016655 
NOZZLE AND HOLDER ASSY.
4D31T1

Nissan-Diesel 

9 430 612 517 
48-3540 
1660087G00 
NOZZLE AND HOLDER ASSY.
BD3

Isuzu 

 
8943973720 
NOZZLE AND HOLDER ASSY.
6HE1
9 430 612 518 
48-3520H 
8943973721 
NOZZLE AND HOLDER ASSY.
6HE1
9 430 613 327 
48-3160A 
 
NOZZLE AND HOLDER ASSY.
JD

Isuzu 

9 430 612 519 
48-3420F 
8970126630 
NOZZLE AND HOLDER ASSY.
4BC2
9 430 612 520 
48-3351C 
 
NOZZLE AND HOLDER ASSY.

Isuzu 

9 430 612 521 
48-3352C 
8970126631 
NOZZLE AND HOLDER ASSY.
4BC2
 
8943974830 
NOZZLE AND HOLDER ASSY.
6HE1
9 430 612 522 
48-3571 
 
NOZZLE AND HOLDER ASSY.
9 430 613 382 
 
NOZZLE AND HOLDER ASSY.

Isuzu 

9 430 613 328 
8943974832 
NOZZLE AND HOLDER ASSY.
6HE1
9 430 613 329 
48-3862G 
8943974833 
NOZZLE AND HOLDER ASSY.
6HE1
 
1153002660 
NOZZLE AND HOLDER ASSY.
6BG1TC
9 430 612 523 
48-3520K 
1153002661 
NOZZLE AND HOLDER ASSY.
6BG1TC
9 430 613 319 
1153002662 
NOZZLE AND HOLDER ASSY.
6BG1TC
9 430 612 524 
48-3860F 
 
NOZZLE AND HOLDER ASSY.

Isuzu 

9 430 613 289 
1153002663 
NOZZLE AND HOLDER ASSY.
6BG1TC
9 430 613 290 
48-3862F 
1153002664 
NOZZLE AND HOLDER ASSY.
6BG1TC
Back to top