Information nozzle and holder assy.
BOSCH
9 430 613 665
9430613665
ZEXEL
105118-4602
1051184602
ISUZU
8944422241
8944422241
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Jeimgrso 4 Pcs Fuel Injector 9 430 613 665 9430613665 483230K Compatible with Isuzu Engine 4JA1 4JB1 4JC1 For Hitachi Excavator EX40 EX45 EX60UR
Jeimgrso Item Name: Fuel Injector || Part Number: 9 430 613 665 9430613665 483230K || Warranty: 6 months || Compatible with Isuzu Engine 4JA1 4JB1 4JC1 For Hitachi Excavator EX40 EX45 EX60UR || Note: Please check both part number and models before you buy it to make sure this part will fit !
Jeimgrso Item Name: Fuel Injector || Part Number: 9 430 613 665 9430613665 483230K || Warranty: 6 months || Compatible with Isuzu Engine 4JA1 4JB1 4JC1 For Hitachi Excavator EX40 EX45 EX60UR || Note: Please check both part number and models before you buy it to make sure this part will fit !
Jeimgrso 1 Pcs Fuel Injector 9 430 613 665 9430613665 483230K Compatible with Isuzu Engine 4JA1 4JB1 4JC1 For Hitachi Excavator EX40 EX45 EX60UR
Jeimgrso Item Name: Fuel Injector || Part Number: 9 430 613 665 9430613665 483230K || Warranty: 6 months || Compatible with Isuzu Engine 4JA1 4JB1 4JC1 For Hitachi Excavator EX40 EX45 EX60UR || Note: Please check both part number and models before you buy it to make sure this part will fit !
Jeimgrso Item Name: Fuel Injector || Part Number: 9 430 613 665 9430613665 483230K || Warranty: 6 months || Compatible with Isuzu Engine 4JA1 4JB1 4JC1 For Hitachi Excavator EX40 EX45 EX60UR || Note: Please check both part number and models before you buy it to make sure this part will fit !
Jeimgrso 4 Pcs Fuel Injector 105118-4602 1051184602 8944422241 Compatible with Isuzu Engine 4JA1 4JB1 4JC1 For Hitachi Excavator EX40 EX45 EX60UR
Jeimgrso Item Name: Fuel Injector || Part Number: 105118-4602 1051184602 8944422241 || Warranty: 6 months || Compatible with Isuzu Engine 4JA1 4JB1 4JC1 For Hitachi Excavator EX40 EX45 EX60UR || Note: Please check both part number and models before you buy it to make sure this part will fit !
Jeimgrso Item Name: Fuel Injector || Part Number: 105118-4602 1051184602 8944422241 || Warranty: 6 months || Compatible with Isuzu Engine 4JA1 4JB1 4JC1 For Hitachi Excavator EX40 EX45 EX60UR || Note: Please check both part number and models before you buy it to make sure this part will fit !
Include in #1:
101482-4480
as NOZZLE AND HOLDER ASSY
Include in #2:
104741-1950
as NOZZLE AND HOLDER ASSY
Cross reference number
Zexel num
Bosch num
Firm num
Name
105118-4602
8944422241 ISUZU
NOZZLE AND HOLDER ASSY.
4JA1 K 53KF NOZZLE & HOLDER ASSY N&NH KBALP N&NH
4JA1 K 53KF NOZZLE & HOLDER ASSY N&NH KBALP N&NH
Information:
start by: a) remove fuel injection pump housing and governor 1. Install the fuel injection pump housing on tool (A). The fuel filter does not have to be removed to remove the fuel transfer pump.2. Install timing pin (1) to keep the injection pump camshaft from turning during disassembly and assembly. 3. Install bolt (B) in the threads of sleeve (3). Tighten the bolt until the sleeve can be removed.
Do not hit on the bolt or sleeve. This will cause damage to the unit.
4. Remove four bolts (4) that hold the pump body to the housing.5. Remove body (2) from the housing.6. Remove idler gear (6) from the pump body.7. Remove O-ring seal (5) and the two lip-type seals from the body. 8. Remove drive gear (8) from the shaft.9. Remove key (7) from the shaft.Install Fuel Transfer Pump
1. Install the inner seal in the body with tool (A). The lip of the seal must be toward the pump gears.2. Install the outer seal in the body with tool (B). The lip of the seal must be toward the outside.
Always be careful not to scratch or cause damage to the machined surface of the pump body.
3. Install O-ring seal (2) and idler gear (1) on the body. 4. Install the key and drive gear (3) on the shaft. 5. Install body (4) on the housing.6. Install the bolts that hold the body to the housing. 7. Put sleeve (5) in position on the camshaft. Timing pin (6) must be in position as shown to keep the camshaft from turning during assembly.8. Install the sleeve on the camshaft with tool (C).
Do not hit the sleeve with a hammer to install it. This will put end force on the camshaft and cause damage to the other components in the pump housing.
9. The end clearance of the camshaft must be .023 .018 in. (0.58 0.46 mm) after sleeve (5) is installed.end by: a) install fuel injection pump housing and governor.
Do not hit on the bolt or sleeve. This will cause damage to the unit.
4. Remove four bolts (4) that hold the pump body to the housing.5. Remove body (2) from the housing.6. Remove idler gear (6) from the pump body.7. Remove O-ring seal (5) and the two lip-type seals from the body. 8. Remove drive gear (8) from the shaft.9. Remove key (7) from the shaft.Install Fuel Transfer Pump
1. Install the inner seal in the body with tool (A). The lip of the seal must be toward the pump gears.2. Install the outer seal in the body with tool (B). The lip of the seal must be toward the outside.
Always be careful not to scratch or cause damage to the machined surface of the pump body.
3. Install O-ring seal (2) and idler gear (1) on the body. 4. Install the key and drive gear (3) on the shaft. 5. Install body (4) on the housing.6. Install the bolts that hold the body to the housing. 7. Put sleeve (5) in position on the camshaft. Timing pin (6) must be in position as shown to keep the camshaft from turning during assembly.8. Install the sleeve on the camshaft with tool (C).
Do not hit the sleeve with a hammer to install it. This will put end force on the camshaft and cause damage to the other components in the pump housing.
9. The end clearance of the camshaft must be .023 .018 in. (0.58 0.46 mm) after sleeve (5) is installed.end by: a) install fuel injection pump housing and governor.