Information nozzle and holder assy.
BOSCH
9 430 612 457
9430612457
ZEXEL
105118-4601
1051184601
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$287.66
03 Jan 2024
CN: QYWD
4Pcs Fuel Injector Model 105118-4601 1051184600 1051184601 for Isuzu Engine 4JA1 4JB1 4JC1 For Hitachi Excavator EX40 EX45 EX60UR
TUWODE Part Number: 105118-4601 1051184600 1051184601 || Item Type: Fuel Injector || Application: Compatible with Isuzu Engine 4JA1 4JB1 4JC1 For Hitachi Excavator EX40 EX45 EX60UR || Installation is straightCompatible withward and does not necessitate any commissioning.Consumes less fuel and prolongs the service life. || Double-check the product picture and part number to make sure it's the item you're looking for and avoid buying the wrong one.
TUWODE Part Number: 105118-4601 1051184600 1051184601 || Item Type: Fuel Injector || Application: Compatible with Isuzu Engine 4JA1 4JB1 4JC1 For Hitachi Excavator EX40 EX45 EX60UR || Installation is straightCompatible withward and does not necessitate any commissioning.Consumes less fuel and prolongs the service life. || Double-check the product picture and part number to make sure it's the item you're looking for and avoid buying the wrong one.
Cross reference number
Zexel num
Bosch num
Firm num
Name
NOZZLE AND HOLDER ASSY.
4JA1 * K 53KF N&NH KBALP N&NH
4JA1 * K 53KF N&NH KBALP N&NH
Information:
Before any service work is to be done on the fuel system the outer surface of the injection pump housing must be clean.
1. Remove cover assembly (1) from the pump housing. Remove the spring for the bypass valve. 2. Loosen bushing (2) from the pump housing with tool (A). Do not loosen screws (3) when removing or installing the pumps. If the levers are moved, the fuel pump adjustment will be changed.3. Remove the fuel injection pump from the pump housing. The sleeve on the plunger will slide off the lever as the pump is removed.Install Fuel Injection Pumps
1. Put fuel injection pump (1) in the bore of the pump housing.2. Sleeve (2) must be engaged with lever (3) when installed correctly.
If the levers (3) have been moved on the shaft, fuel pump adjustment must be made. (See TESTING AND ADJUSTING).
3. Tighten the bushing with tool (A) to a torque of 70 5 lb.ft. (95 7 N m). 4. Put the spring and bypass valve in place. Install the cover assembly on the pump housing. Be sure spring (4) is in position in the cover.Disassemble Fuel Injection Pumps
start by: a) remove fuel injection pumps1. Remove bushing (1) from bonnet (2).2. Remove ring (3) from the bonnet and barrel (7). Remove check valve (6) and spring (4) from the bonnet.3. Remove spring (8) and washer (5). Remove plunger (9) and sleeve (10). Keep the plunger and sleeve with their respective barrel for installation. Do not use plungers, sleeves or barrels with other plungers, sleeves or barrels.Assemble Fuel Injection Pumps
1. Install sleeve (4), plunger (5), spring (2) and washer (3) on barrel (1).
Make sure the sleeve is installed with the thin edge up.
Be sure the sleeve and plunger are installed in their original barrel. Make sure the large hole in the plunger is up.2. Install the check valve and spring in the bonnet. Connect the barrel and bonnet and install the ring. Install the bushing on the bonnet.end by: a) install fuel injection pumps