Information nozzle and holder assy.
BOSCH
9 430 613 671
9430613671
ZEXEL
105118-4224
1051184224
ISUZU
8944078793
8944078793
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$113.89
27 Apr 2021
0.6[0.27] Pounds
CN: Notonparts
Notonparts 4PCS 48-3410A Fuel Injector Assembly 6646906 105118-4223 Fits For Mustang Bobcat Loader 960 2060 843 853 1213 Isuzu Engine 4JB1
none-branded Part number: 8944078793, 48-3230J, 48-3410A, 6646906, 105118-4223, 48-3100, 8944422250 || Fuel Injector Fits for Isuzu 4JB1 Engine. || Fit for: Mustang Bobcat Loader 960 2060 843 853 1213 || High Quality Fuel Injector, Each one is Computer Balanced and Tested. Premium Quality - Reliable in Operation, Long Working Life. || Parts can vary on your serial number, if you are unsure this will fit your machine please send us your model and serial number to confirm.
none-branded Part number: 8944078793, 48-3230J, 48-3410A, 6646906, 105118-4223, 48-3100, 8944422250 || Fuel Injector Fits for Isuzu 4JB1 Engine. || Fit for: Mustang Bobcat Loader 960 2060 843 853 1213 || High Quality Fuel Injector, Each one is Computer Balanced and Tested. Premium Quality - Reliable in Operation, Long Working Life. || Parts can vary on your serial number, if you are unsure this will fit your machine please send us your model and serial number to confirm.
$112.89
27 Apr 2021
0.6[0.27] Pounds
CN: Weelparz Global
Weelparz 8944078793 6646906 (4) Fuel Injector 48-3230J 6646906 48-3100 For Isuzu Engine 4JB1 Mustang Bobcat Loader 2060 1213 960 843 853
Weelparz Part number: 8944078793, 6646906, 105118-4223, 48-3230J, 48-3410A, 48-3100, 8944422250 || Fit for: Isuzu 4JB1 Engine, Mustang Bobcat Loader 843 853 1213 960 2060 || Package Included: Fuel Injector x 4 || Manufacturerd According to OME Standard and Specifications. Directly Replace and Easy to Install. || 100% Tested Before Shipping to Ensure Product Safety, Stability and Durability.
Weelparz Part number: 8944078793, 6646906, 105118-4223, 48-3230J, 48-3410A, 48-3100, 8944422250 || Fit for: Isuzu 4JB1 Engine, Mustang Bobcat Loader 843 853 1213 960 2060 || Package Included: Fuel Injector x 4 || Manufacturerd According to OME Standard and Specifications. Directly Replace and Easy to Install. || 100% Tested Before Shipping to Ensure Product Safety, Stability and Durability.
Include in #2:
104741-1193
as NOZZLE AND HOLDER ASSY
Cross reference number
Zexel num
Bosch num
Firm num
Name
105118-4224
8944078793 ISUZU
NOZZLE AND HOLDER ASSY.
4JB1 K 53KF NOZZLE & HOLDER ASSY N&NH KBALP N&NH
4JB1 K 53KF NOZZLE & HOLDER ASSY N&NH KBALP N&NH
Information:
T-T-T Procedure
A torque-turn-tighten (T-T-T) procedure is used in many specifications and instructions.1. Clean the bolt and nut threads.2. Put lubricant on the threads and the seat face of the bolt and the nut.3. Turn the bolt or the nut tight according to the torque specification.4. Put a location mark on the part and on the bolt or the nut.5. Turn the bolt or the nut tighter the amount of degrees according to the specifications. The side of a nut or bolt head can be used for reference if a mark can not be put on. Torque Wrench Extension
When a torque wrench extension is used with a torque wrench, the torque indication on the torque wrench will be less than the real torque.
TORQUE WRENCH WITH TORQUE WRENCH EXTENSION.
E: Torque wrench drive axis-to-torque wrench extension drive axis. W: Mark on handle-to-torque wrench drive axis.1. Put a mark on the handle. Measure the handle from the mark to the axis of the torque wrench drive (W).2. Measure the torque wrench extension from the torque wrench drive to the axis of the torque wrench extension drive (E).3. To get correct torque indication (TI) when the real torque (RT) is known: Example: W = 304.8 mm (12 in.); E = 65.0 mm (2.56 in.); RT (from specifications) = 170 N m (125 lb. ft.). 4. Hold the torque wrench handle with the longest finger of the hand over the mark on the handle to get the real torque (RT) with low torque indication (TI) on the torque wrench.Locks
Flat metal locks must be installed properly to be effective. Bend one end of the lock around the edge of the part. Bend the other end against one flat surface of the nut or bolt head.Always install new locks in compartments which house moving parts.If lockwashers are installed on housings made of aluminum, use a flat washer between the lockwasher and the housing. Lines And Wires
When removing or disconnecting a group of lines or wires, tag each one to assure proper assembly.Lubrication
Where applicable, fill the compartments of the components serviced with the amount, type and grade of lubricant recommended in the Lubrication and Maintenance Guide.Rust Preventive Compound
Clean the rust preventive compound from all machined surfaces of new parts before installing them.Shims
When shims are removed, tie them together and identify them as to location. Keep shims clean and flat until they are reinstalled.Bearings
Anti-Friction Bearings
When an anti-friction bearing is removed, cover it to keep out dirt and abrasives. Wash bearings in nonflammable cleaning solution and allow them to drain dry. The bearing may be dried with compressed air, but DO NOT SPIN THE BEARING. Discard the bearings if the races and balls or rollers are pitted, scored or burned. If the bearing is serviceable, coat it with oil and wrap it in clean paper. Do not unwrap new bearings until time of installation.The life of an anti-friction bearing will be shortened if not properly lubricated.Double Row, Tapered Roller
Double row, tapered roller bearings are precision fit during manufacture and
A torque-turn-tighten (T-T-T) procedure is used in many specifications and instructions.1. Clean the bolt and nut threads.2. Put lubricant on the threads and the seat face of the bolt and the nut.3. Turn the bolt or the nut tight according to the torque specification.4. Put a location mark on the part and on the bolt or the nut.5. Turn the bolt or the nut tighter the amount of degrees according to the specifications. The side of a nut or bolt head can be used for reference if a mark can not be put on. Torque Wrench Extension
When a torque wrench extension is used with a torque wrench, the torque indication on the torque wrench will be less than the real torque.
TORQUE WRENCH WITH TORQUE WRENCH EXTENSION.
E: Torque wrench drive axis-to-torque wrench extension drive axis. W: Mark on handle-to-torque wrench drive axis.1. Put a mark on the handle. Measure the handle from the mark to the axis of the torque wrench drive (W).2. Measure the torque wrench extension from the torque wrench drive to the axis of the torque wrench extension drive (E).3. To get correct torque indication (TI) when the real torque (RT) is known: Example: W = 304.8 mm (12 in.); E = 65.0 mm (2.56 in.); RT (from specifications) = 170 N m (125 lb. ft.). 4. Hold the torque wrench handle with the longest finger of the hand over the mark on the handle to get the real torque (RT) with low torque indication (TI) on the torque wrench.Locks
Flat metal locks must be installed properly to be effective. Bend one end of the lock around the edge of the part. Bend the other end against one flat surface of the nut or bolt head.Always install new locks in compartments which house moving parts.If lockwashers are installed on housings made of aluminum, use a flat washer between the lockwasher and the housing. Lines And Wires
When removing or disconnecting a group of lines or wires, tag each one to assure proper assembly.Lubrication
Where applicable, fill the compartments of the components serviced with the amount, type and grade of lubricant recommended in the Lubrication and Maintenance Guide.Rust Preventive Compound
Clean the rust preventive compound from all machined surfaces of new parts before installing them.Shims
When shims are removed, tie them together and identify them as to location. Keep shims clean and flat until they are reinstalled.Bearings
Anti-Friction Bearings
When an anti-friction bearing is removed, cover it to keep out dirt and abrasives. Wash bearings in nonflammable cleaning solution and allow them to drain dry. The bearing may be dried with compressed air, but DO NOT SPIN THE BEARING. Discard the bearings if the races and balls or rollers are pitted, scored or burned. If the bearing is serviceable, coat it with oil and wrap it in clean paper. Do not unwrap new bearings until time of installation.The life of an anti-friction bearing will be shortened if not properly lubricated.Double Row, Tapered Roller
Double row, tapered roller bearings are precision fit during manufacture and