105113-5282 ZEXEL 9 430 612 261 BOSCH NOZZLE AND HOLDER ASSY. 9430612261 1051135282 e246950500z


 

Information nozzle and holder assy.

BOSCH 9 430 612 261 9430612261
ZEXEL 105113-5282 1051135282
DAIHATSU E246950500Z e246950500z
105113-5282 NOZZLE AND HOLDER ASSY.
Rating:
15
Buy NOZZLE AND HOLDER ASSY. 105113-5282 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
105113-5282 
9 430 612 261 
43-5054C 
E246950500Z  DAIHATSU
NOZZLE AND HOLDER ASSY.
DL-24 K 30AB NOZZLE & HOLDER ASSY N&NH(KBF) N&NH




Information:

Introduction
Correction to D3G failures of the fuel injection pumpProblem
The D3G has had failures of the fuel injection pump. The failures are seen as low power, running rough, smoking, and hard starting. The failures occur from 8 to 1350 hours. Most failures have been concentrated in the 8 to 400 hour range. There appears to be no environmental aspects or application aspects to the failures at this time. Solution
The rotary fuel pump that is used on the Track-Type Tractors uses diesel fuel for lubrication of the pump. One plunger is used for all 6 injectors. This increases the sensitivity to fuel quality. Customers that are having problems should use 256-4968 Fuel Conditioner . This should help fuel quality by increasing the lubrication. This additive can also be used with low sulfur diesel. Use this fuel conditioner according to directions. For more information, refer to , PELJ0525, "Introducing New Cat Diesel Fuel Conditioner". Low sulfur diesel is already available in many states per the 2007 Highway Diesel Rule. Refer to the following map that shows the areas that produce lower sulfur diesel fuel.
Illustration 1 g01229705
Note: Toyu fuel is not suitable for use in these machines. Toyu fuel does not provide any lubrication for the pump. Using this fuel may cause early failures.

Have questions with 105113-5282?





Group cross 105113-5282 ZEXEL

Daihatsu 

 
 
NOZZLE AND HOLDER ASSY.
DL-28
9 430 612 246 
43-8110A 
 
NOZZLE AND HOLDER ASSY.
DL-28
9 430 612 247 
43-8110B 
 
NOZZLE AND HOLDER ASSY.
DL-28
9 430 612 248 
43-5020C 
 
NOZZLE AND HOLDER ASSY.
DL-22
9 430 612 249 
43-5023C 
 
NOZZLE AND HOLDER ASSY.
DL-22
9 430 612 250 
43-5050A 
 
NOZZLE AND HOLDER ASSY.
DL-24
9 430 612 251 
43-5051A 
 
NOZZLE AND HOLDER ASSY.
DL-24
9 430 612 252 
43-5054A 
E246950020Z 
NOZZLE AND HOLDER ASSY.
DL-24
9 430 612 253 
43-5020D 
 
NOZZLE AND HOLDER ASSY.
DL-22
9 430 612 254 
43-5023D 
E226950541Z 
NOZZLE AND HOLDER ASSY.
DL-22
9 430 612 255 
43-5020F 
 
NOZZLE AND HOLDER ASSY.
DL-22
9 430 612 256 
43-5023E 
E226950542Z 
NOZZLE AND HOLDER ASSY.
DL-22
9 430 613 274 
 
NOZZLE AND HOLDER ASSY.
DL-24
9 430 612 257 
43-5051B 
 
NOZZLE AND HOLDER ASSY.
DL-24
9 430 612 258 
43-5054B 
E246950040Z 
NOZZLE AND HOLDER ASSY.
DL-24
9 430 612 259 
43-5050C 
 
NOZZLE AND HOLDER ASSY.
DL-24
9 430 612 260 
43-5051C 
 
NOZZLE AND HOLDER ASSY.
DL-24
105113-5282  
9 430 612 261 
43-5054C 
E246950500Z 
NOZZLE AND HOLDER ASSY.
DL-24
9 430 613 275 
 
NOZZLE AND HOLDER ASSY.
DL-24
9 430 612 262 
43-5051D 
 
NOZZLE AND HOLDER ASSY.
DL-24
9 430 612 263 
43-5054D 
E246950510Z 
NOZZLE AND HOLDER ASSY.
DL-24
Back to top