105111-4010 ZEXEL 9 430 612 030 BOSCH NOZZLE AND HOLDER ASSY. 9430612030 1051114010 6162133100


 

Information nozzle and holder assy.

BOSCH 9 430 612 030 9430612030
ZEXEL 105111-4010 1051114010
KOMATSU 6162133100 6162133100
105111-4010 NOZZLE AND HOLDER ASSY.
Rating:
15
Buy NOZZLE AND HOLDER ASSY. 105111-4010 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
105111-4010 
105111-4011 
9 430 612 030 
41-7020 
6162133100  KOMATSU
NOZZLE AND HOLDER ASSY.
SA6D170 * K




Information:

1. Remove tachometer drive (3) from transfer pump cover (4).2. Remove bolts (1). Separate cover (4) and pump body (2). 3. Remove lip-type seal (6) from the cover. Remove plug (5), the seal, spring and plunger (bypass valve) from the cover. 4. Remove nut (10) from shaft (7). Remove gear (9) and key (11).5. Remove shaft (7) and gear (8) as a unit. Remove gear (8) from drive shaft (7) with a press.6. Remove idler gear (12). 7. Remove bushing (14), two lip-type seals and the bottom bearing from pump body (2).8. Remove check valve (13).Assemble Fuel Transfer Pump
1. Install bushing (4) in body (3) with Tooling (B). The bushing must be .80 .50 mm (.031 .020 in) below the (gear) surface of the body.2. Install the check valve in the body with Tooling (A).3. Install lip-type seal (5) with Tooling (C). Install the seal until it is 26.19 .13 mm (1.031 .005 in) from the bottom (drive gear) surface of body (3) and with the lip toward bushing (4) as shown.4. Install lip-type seal (6) with Tooling (D). Install the seal until it is 14.2 0.5 mm (.559 .020 in) from the bottom (drive gear) surface of body (3) and with the lip away from seal (5) as shown.5. Install bearing (7) in body (3) with Tooling (E). The bearing must be even with the bottom (drive gear) surface of the pump body. 6. Heat gear (8) to a maximum temperature of 315° C (600° F). Install gear (8) on shaft (11) until dimension (X) is 49.71 0.25 mm (1.957 .010 in).7. Install the drive shaft and gear in body (3). Install the key, gear (10) and nut (9). Tighten the nut to a torque of 30 7 N m (22 5 lb ft).8. Install idler gear (12) in body (3).9. Install lip-type seal (2) with Tooling (C). Install the seal until it is 22.61 .05 mm (.890 .002 in) from the top surface of cover (1) with the lip toward the inside as shown. 10. Install plunger (14) (bypass valve), spring (15) and seal and plug (13) in pump cover (1). Tighten plug (13) to a torque of 37 4 N m (27 3 lb ft).
Do not let the liquid gasket enter the pump during application or assembly.
11. Put 7M-7260 Liquid Gasket Material on the surface of cover (1). Install cover (1) on pump body (3). The drive shaft must turn freely after the bolts that hold the transfer pump together are tightened.12. Install the tachometer drive on cover (1).End By:a. install fuel transfer pump

Have questions with 105111-4010?





Group cross 105111-4010 ZEXEL

Komatsu 

105111-4010  

105111-4011 
9 430 612 030 
41-7020 
6162133100 
NOZZLE AND HOLDER ASSY.
SA6D170
9 430 612 031 
41-7110 
 
NOZZLE AND HOLDER ASSY.

Komatsu 

9 430 612 939 
41-7111 
6162133101 
NOZZLE AND HOLDER ASSY.
SA6D170
9 430 613 652 
41-7112 
6162133102 
NOZZLE AND HOLDER ASSY.
SA6D170
9 430 612 032 
41-7020C 
6162133300 
NOZZLE AND HOLDER ASSY.
S6D170
9 430 610 094 
41-7110A 
 
NOZZLE AND HOLDER ASSY.

Komatsu 

9 430 612 033 
41-7111A 
6162133302 
NOZZLE AND HOLDER ASSY.
S6D170
9 430 613 651 
41-7112A 
6162133303 
NOZZLE AND HOLDER ASSY.
S6D170
9 430 612 034 
41-7030B 
6151113100 
NOZZLE AND HOLDER ASSY.
S6D125
9 430 612 035 
41-7030A 
6152113100 
NOZZLE AND HOLDER ASSY.
SA6D125
9 430 612 036 
41-7020A 
6162133200 
NOZZLE AND HOLDER ASSY.
SA6D170
9 430 612 037 
41-7110B 
 
NOZZLE AND HOLDER ASSY.

Komatsu 

9 430 612 038 
41-7111B 
6162133201 
NOZZLE AND HOLDER ASSY.
SA6D170
9 430 613 650 
41-7112B 
6162133202 
NOZZLE AND HOLDER ASSY.
SA6D170
9 430 610 110 
41-7040B 
6151113101 
NOZZLE AND HOLDER ASSY.
S6D125
9 430 612 039 
41-7040B 
 
NOZZLE AND HOLDER ASSY.
SA6D125
9 430 612 938 
41-7030 C 
6152113101 
NOZZLE AND HOLDER ASSY.
SA6D125
9 430 612 040 
41-7020E 
6162133400 
NOZZLE AND HOLDER ASSY.
SA6D170
Back to top