105110-7880 ZEXEL 9 430 611 980 BOSCH NOZZLE AND HOLDER ASSY. 9430611980 1051107880 1153003790

(1) Torque for the terminal nuts ... 30 3 N m (22 2 lb ft)(2) Torque for the screws that hold the nose housing to the lever housing ... 20 3 N m (15 2 lb ft)Clearance between the pinion and housing (pinion clearance) ... 8.3 to 9.9 mm (.33 to .39 in)8C3651 24V
Rotation as seen from the drive end ... clockwiseNo load conditions: Speed (rpm) ... 7350 1050Current amps ... 60 to 75Voltage ... 23Used with solenoid ... 7T02584N3180 24V, 2P3926 24V
The two 10-32 screws on the underside of the solenoid are tightened to a torque of ... 2 to 3 N m (16 to 30 lb in)Rotation as seen from the drive end ... clockwiseNo load conditions: Speed (rpm) ... 6000 to 8250Current amps ... 155 15Voltage ... 23Used with solenoid ... 3T34213T2647 24V
The two 10-32 screws on the solenoid are tightened to a torque of ... 2.25 0.25 N m (20 2 lb in)The two 1/2-13 nuts on the solenoid are tightened to a torque of ... 31 4 N m (23 3 lb ft)Rotation as seen from the drive end ... clockwiseNo load conditions: Speed (rpm) ... 8130 2130Current amps ... 89 29Voltage ... 23Used with solenoid ... 7T88543T8946 24V
Rotation as seen from the drive end ... clockwiseNo load conditions: Speed (rpm) ... 6500 1000Current amps ... 107.5 12.5Voltage ... 20Used with solenoid ... 7T88549G4338 24V
Rotation as seen from the drive end ... clockwiseMinimum (no load) speed (rpm) ... 6500Current consumption (draw) at 20V (no load) ... 77A(1) Torque for the housing bolts ... 11 N m (8 lb ft)(2) Torque for the terminal nuts ... 27 to 34 N m (20 to 25 lb ft)(3) Clearance between the pinion and housing ... 0.51 to 1.27 mm (.020 to .050 in)Used with solenoid ... 3T86353T6305 24V
Rotation as seen from the drive end ... clockwiseMaximum (no load) speed (rpm) ... 5500Maximum current consumption (draw) (no load) ... 200A(1) Torque for the large terminal nuts ... 27 to 33 N m (20 to 24 lb ft) Torque for the small terminal nuts ... 4 to 5 N m (35 to 45 lb in)(2) Service limit of brushes ... 17.5 mm (.69 in)(3) Service limit of commutater diameter ... 48 mm (1.9 in)Pinion to ring gear clearance ... 1.5 to 5.5 mm (.06 to .22 in)Used with solenoid ... 9X03329X4447 24V
(1) Torque for terminal nuts: Small terminal nuts ... 2.25 .25 N m (20 2 lb ft)Large terminal nuts ... 30.5 3.5 N m (22.5 2.5 lb ft)No load conditions: Speed (rpm) ... 3300Current amps ... 80AVoltage ... 23.5Used with solenoid ... 3E0135