105101-7850 ZEXEL 9 430 612 840 BOSCH NOZZLE AND HOLDER ASSY. 9430612840 1051017850


 

Information nozzle and holder assy.

BOSCH 9 430 612 840 9430612840
ZEXEL 105101-7850 1051017850
105101-7850 NOZZLE AND HOLDER ASSY.
Rating:
8
Buy NOZZLE AND HOLDER ASSY. 105101-7850 zexel genuine, new aftermarket engine parts with delivery

Include in #1:

106871-4170 as NOZZLE AND HOLDER ASSY

Cross reference number

Zexel num
Bosch num
Firm num
Name
105101-7850 
9 430 612 840 
30-3500J 
   
NOZZLE AND HOLDER ASSY.
F20C K




Information:

Cautions Regarding Battery* Handle Battery Carefully * Never use flames or allow sparks near the battery. The battery releases flammable hydrogen gas and oxygen gas. These gases can be ignited by flames and cause an explosion.* Do not use the battery when the fluid surface is lower than the minimum level. Using a battery with a low electrolyte level can result in an explosion.* Do not short the battery terminals with a tool or other metal object.* When disconnecting battery cables, always remove the cable from the negative (-) terminal first. When reconnecting cables, attach the cable to the positive (+) terminal first.* Charge the battery in a well-ventilated area, with all filling hole plugs removed.* Make sure the cable clamps are securely installed on the battery terminals. A loose cable clamp can cause sparks that may result in an explosion.* Before servicing electrical components or conducting electrical welding, set the battery switch to the [Open/OFF] position or disconnect the cable from the negative (-) battery terminal to cut off the electrical current.* Electrolyte (battery fluid) contains dilute sulfuric acid. Careless handling of the battery can lead to the loss of sight and/or burns. Also, do not swallow electrolyte.* Wear protective goggles and rubber gloves when maintaining and inspecting the battery (when adding water, charging, etc.).* If electrolyte is spilled onto the skin or clothes, immediately wash with lots of clean fresh water and thoroughly clean with soap.* If electrolyte gets into eyes, immediately flush with lots of clean fresh water and seek immediate medical attention.* Should you accidentally swallow electrolyte, gargle with plenty of water, then drink lots of water, and seek immediate medical attention.
Response To Abnormalities* If Engine Overheats, Conduct Heating Operation Before Stopping The Engine If the engine overheats, do not stop the engine immediately. Abruptly stopping an overheated engine may cause the coolant temperature to rise, resulting in seizing of the engine. If the engine overheats, operate the engine at low idling speed (cooling operation), and stop the engine after the coolant temperature lowers sufficiently.Do not add coolant immediately after stopping the engine. Adding coolant to a hot engine may cause damage to the cylinder heads due to sudden change in temperature. Add coolant after the engine cools to room temperature.* If Engine Stops Due To Abnormality, Exercise Caution When Restarting If the engine stops due to an abnormality, do not restart the engine immediately. If the engine stops with an alarm, check and correct the cause of the problem before restarting. Operating the engine without correcting the problem may result in serious engine problems.* If Oil Pressure Drops, Stop Engine Immediately If the engine oil pressure decreases, stop the engine immediately, and inspect the lubrication system. Operating the engine with low oil pressure may cause seizing of the bearings and other parts.* If Fan Belt Breaks, Stop Engine Immediately If the fan belt breaks, stop the engine immediately. Continued operation of the engine without the fan belt causes coolant to change into steam

Have questions with 105101-7850?





Group cross 105101-7850 ZEXEL

9 430 613 340 
30-3590 
 
NOZZLE AND HOLDER ASSY.
9 430 611 637 
30-3590C 
 
NOZZLE AND HOLDER ASSY.

Hino 

9 430 611 638 
30-3591C 
236002750A 
NOZZLE AND HOLDER ASSY.
F-3

Hyundai 

9 430 612 831 
30-4630 
 
NOZZLE AND HOLDER ASSY.
P

Hino 

9 430 611 639 
31-7360B 
236002760A 
NOZZLE AND HOLDER ASSY.
K13D
9 430 612 830 
 
NOZZLE AND HOLDER ASSY.
F17E
9 430 612 829 
 
NOZZLE AND HOLDER ASSY.
F17E
105101-7850  
9 430 612 840 
30-3500J 
 
NOZZLE AND HOLDER ASSY.
F20C

Isuzu 

9 430 611 640 
30-4650 
8943956960 
NOZZLE AND HOLDER ASSY.
6HH1
9 430 611 641 
30-4650L 
8943956961 
NOZZLE AND HOLDER ASSY.
6HH1
9 430 611 642 
30-4650L 
8943956962 
NOZZLE AND HOLDER ASSY.
6HH1
9 430 611 643 
30-4651L 
8943956963 
NOZZLE AND HOLDER ASSY.
6HH1
9 430 612 843 
8943956970 
NOZZLE AND HOLDER ASSY.
6HH1
9 430 611 644 
30-4660 
8943900490 
NOZZLE AND HOLDER ASSY.
6HE1TC
9 430 611 645 
30-4660H 
8943900491 
NOZZLE AND HOLDER ASSY.
6HE1TC

Hino 

9 430 611 646 
30-3530C 
236002770A 
NOZZLE AND HOLDER ASSY.
P-5
9 430 612 740 
 
NOZZLE AND HOLDER ASSY.

Hino 

9 430 611 647 
30-3531K 
236002770B 
NOZZLE AND HOLDER ASSY.
P-5
9 430 612 842 
236002780A 
NOZZLE AND HOLDER ASSY.
K-3
9 430 611 648 
30-3611E 
 
NOZZLE AND HOLDER ASSY.

Hino 

9 430 611 649 
30-3612E 
236002781A 
NOZZLE AND HOLDER ASSY.
K-3
Back to top