105101-7430 ZEXEL 9 430 611 594 BOSCH NOZZLE AND HOLDER ASSY. 9430611594 1051017430 1153002940


 

Information nozzle and holder assy.

BOSCH 9 430 611 594 9430611594
ZEXEL 105101-7430 1051017430
ISUZU 1153002940 1153002940
105101-7430 NOZZLE AND HOLDER ASSY.
Rating:
25
Buy NOZZLE AND HOLDER ASSY. 105101-7430 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
105101-7430 
105101-7431 
9 430 611 594 
31-4830C 
1153002940  ISUZU
NOZZLE AND HOLDER ASSY.
12PD1MTC * K 53KC N&NH KBDL2,1-S N&NH




Information:

General Information
Fig. 1-Fuel Pump LocationThe fuel transfer pump is located on the right side of the engine as shown on (1, Fig. 1).Removal
Disconnect and plug fuel lines (2, Fig. 1) at pump.Remove attaching hardware.Repair
Airtex Fuel Transfer Pumps
Fig. 2-Airtex Fuel Transfer PumpTo remove or install primer lever, (1, Fig. 2) compress rocker arm lever (2). And pull primer lever out.Further disassembly of the transfer pump is not possible.A.C. Fuel Transfer Pumps
When disassembling, mark pump cover and pump body for easier reassembly.Test all parts for serviceability and replace, if necessary.When assembling the fuel pump, observe the following:
Fig. 3-A.C. Fuel Transfer PumpMake sure diaphragm (1, Fig. 3) is engaged in rocker arm (2).Before installing the pump cover (3), position diaphragm so that it is level by moving rocker arm. Hold lever in this position.Install pump cover and cover screws. However, turn in screws so that they just contact the washers. Operate rocker arm several times, then release with a snap to make sure that diaphragm will not be overstretched when in use. Tighten cover screws in a crosswise pattern.Corona (B.C.D.) Fuel Transfer Pump
When disassembling, mark pump cover and pump body for easier reassembly.
Fig. 4-Diaphragm RemovalDisconnect diaphragm by pressing it against flange (Fig. 4).
Fig. 5-Remove Valve Plate and FilterCarefully remove valve plate with filter from pump cover (Fig. 5).Check all parts for serviceability and replace, if necessary.When assembling the fuel pump, observe the following: Make sure diaphragm is engaged in rocker arm.Before installing the pump cover, position diaphragm so that it is level by moving rocker arm. Hold lever in this position.Install pump cover and cover screws. However, turn in screws so that they just contact the washers.Operate rocker arm several times, then release with a snap to make sure that diaphragm will not be overstretched when in use.Tighten cover screws in a crosswise pattern.Installation
Using a new gasket, attach transfer pump to cylinder block. Connect lines and bleed fuel system.

Have questions with 105101-7430?





Group cross 105101-7430 ZEXEL

Hino 

9 430 613 021 
236002470A 
NOZZLE AND HOLDER ASSY.
K13D-B
9 430 611 589 
31-7240L 
236002470B 
NOZZLE AND HOLDER ASSY.
K13D-B
9 430 611 590 
31-7241S 
236002470C 
NOZZLE AND HOLDER ASSY.
K13D-B
9 430 613 018 
31-7241247 
236002470D 
NOZZLE AND HOLDER ASSY.
K13D-B
9 430 611 591 
30-44503 
 
NOZZLE AND HOLDER ASSY.

Mitsubishi 

9 430 611 592 
30-44513 
ME160666 
NOZZLE AND HOLDER ASSY.
8M20
9 430 613 335 
 
NOZZLE AND HOLDER ASSY.

Mitsubishi 

9 430 611 593 
30-44614 
ME120897 
NOZZLE AND HOLDER ASSY.
6D40T1

Isuzu 

105101-7430  

105101-7431 
9 430 611 594 
31-4830C 
1153002940 
NOZZLE AND HOLDER ASSY.
12PD1MTC
9 430 611 595 
31-4831C 
1153002941 
NOZZLE AND HOLDER ASSY.
12PD1MTC
9 430 611 596 
30-3460A 
1153002950 
NOZZLE AND HOLDER ASSY.
6WA1
9 430 611 597 
30-3461A 
1153002951 
NOZZLE AND HOLDER ASSY.
6WA1
9 430 611 598 
30-3462A 
1153003510 
NOZZLE AND HOLDER ASSY.
6WA1

Hino 

9 430 613 004 
236002480A 
NOZZLE AND HOLDER ASSY.
F20C-B
9 430 611 599 
30-3471C 
236002480B 
NOZZLE AND HOLDER ASSY.
F20C-B
9 430 611 600 
30-3472C 
236002480C 
NOZZLE AND HOLDER ASSY.
F20C-B
9 430 613 336 
 
NOZZLE AND HOLDER ASSY.

Hino 

9 430 611 601 
30-3473A 
236002480D 
NOZZLE AND HOLDER ASSY.
F20C-B
9 430 613 003 
30-3474A 
236002480E 
NOZZLE AND HOLDER ASSY.
F20CB
9 430 613 003 
30-3474A 
S236002480 
NOZZLE AND HOLDER ASSY.
F20CB

Isuzu 

9 430 613 005 
1153003070 
NOZZLE AND HOLDER ASSY.
6BG1
9 430 613 000 
1153003071 
NOZZLE AND HOLDER ASSY.
6BG1
9 430 613 001 
1153003072 
NOZZLE AND HOLDER ASSY.
6BG1
9 430 611 602 
30-3231M 
1153003073 
NOZZLE AND HOLDER ASSY.
6BG1

Hino 

9 430 611 603 
30-3500 
236002510A 
NOZZLE AND HOLDER ASSY.
V25C-B
9 430 611 604 
31-7240S 
236002520A 
NOZZLE AND HOLDER ASSY.
K13D
9 430 611 605 
31-7370 
236002520B 
NOZZLE AND HOLDER ASSY.
K13D
9 430 611 606 
31-7241P 
236002520C 
NOZZLE AND HOLDER ASSY.
K13D
9 430 612 999 
31-7241252 
236002520D 
NOZZLE AND HOLDER ASSY.
K13D
9 430 610 166 
31-7310 
236002530A 
NOZZLE AND HOLDER ASSY.
W06D-TI
Back to top