105101-4810 ZEXEL 9 430 611 292 BOSCH NOZZLE AND HOLDER ASSY. 9430611292 1051014810 236001021a


 

Information nozzle and holder assy.

BOSCH 9 430 611 292 9430611292
ZEXEL 105101-4810 1051014810
HINO 236001021A 236001021a
105101-4810 NOZZLE AND HOLDER ASSY.
Rating:
35
Buy NOZZLE AND HOLDER ASSY. 105101-4810 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
105101-4810 
9 430 611 292 
31-5240 
236001021A  HINO
NOZZLE AND HOLDER ASSY.
EK100 * K




Information:

Introduction
Do not perform any of the following procedure or order parts until you have read and understand the procedure. The procedure that follows below covers that installation of the new Diesel Exhaust Fluid (DEF) filter.Required Parts
Table 1 below contain the parts needed to complete the installation of the new DEF filter.Note: Only one DEF filter group is required per engine. Use Table 2 to determine which filter is the appropriate filter for each DEF header. Illustration 1 shows the location of the DEF header part number.
Table 1
Item Qty Part Number Part Description
1 1 452-6055 Filter Base As
2 1 453-1604(1) Diesel Exhaust Fluid Filter Gp
3 1 453-1605***#i05999309/d1820e940*** Diesel Exhaust Fluid Filter Gp
4 1 453-1606***#i05999309/d1820e940*** Diesel Exhaust Fluid Filter Gp
5 1 378-3187 Diesel Exhaust Fluid Filter Gp
6 1 423-3251 Connector
7 1 425-0385 Filter As
8 1 391-5262 Gasket
(1) Use Table 2 to choose the correct part that corresponds to the DEF header
Illustration 1 g03745839
(1) Location of DEF header part number
Table 2
DEF Header Part Number Required DEF Filter
434-3241 453-1604
434-3242 453-1605
434-3243 453-1606 Installation Procedure
Illustration 2 g03736523
(1) DEF header
(2) DEF filter
(3) DEF tank
(4) DEF header bolts
Clean the area around DEF header (1). Clear any dirt or debris that could contaminate the DEF tank or lines when removed. Note: If proper cleaning is not performed, DEF pump performance issues or failure may occur.
Disconnect the two DEF lines, two coolant lines, and harness from the DEF header assembly.
Remove the six DEF header screws (4) from the DEF header assembly. Note: Do not discard the screws that secure the DEF header assembly to the DEF tank. The screws will be reused in a later step.
Remove the DEF header assembly. Remove the previous DEF header gasket and discard.
Illustration 3 g03736534
(5) 452-6055 Filter Base As
Install filter base assembly (5) onto the DEF header assembly. Note: Each half of the adapter has two small locking tabs that secure to the bottom side of the DEF header assembly.
Remove the previous 425-0385 Filter As located at the bottom of the DEF pick-up tube.
Install the new 425-0385 Filter As onto the DEF header assembly.
Illustration 4 g03736545
(6) Band clamp
Install the correct DEF filter onto the DEF header adapter and secure using band clamp (6) that is supplied. Torque the band clamp to 4.5 0.7 N m (40 6 lb in).
Install the DEF header assembly back into the DEF tank. Secure the DEF header to the DEF tank using the six screws previously removed in Step 3. Torque the six screws to 5 1 N m (44 9 lb in).
Reconnect the harness, coolant lines, and DEF lines to the DEF header.
Illustration 5 g03736566
(7) DEF pump inlet filter fitting
(8) Main DEF pump filter
Replace DEF pump inlet filter fitting (7) and main DEF pump filter (8). Refer to Disassembly and Assembly, UENR0132, "Diesel Exhaust Fluid Filter - Remove and Install" for the replacement procedure.

Have questions with 105101-4810?





Group cross 105101-4810 ZEXEL

Isuzu 

 
5153000600 

4BB1

Hino 

105101-4810  
9 430 611 292 
31-5240 
236001021A 
NOZZLE AND HOLDER ASSY.
EK100
9 430 611 293 
31-4130T 
 
NOZZLE AND HOLDER ASSY.

Hino 

9 430 611 294 
31-5250 
236001022A 
NOZZLE AND HOLDER ASSY.
EK100

Mitsubishi 

9 430 611 295 
31-4220 
ME036290 

6D14
9 430 611 296 
31-4250 
 
NOZZLE AND HOLDER ASSY.
6D14

Hino 

9 430 611 297 
31-5250A 
236001023A 

EK100

Nissan-Diesel 

9 430 611 298 
31-4210B 
1660097006 
NOZZLE AND HOLDER ASSY.
RD8T

Mitsubishi 

9 430 611 299 
31-3480 
3096105011 
NOZZLE AND HOLDER ASSY.
6D20

Isuzu 

9 430 611 300 
31-4170B 
1153000411 
NOZZLE AND HOLDER ASSY.
E1203
9 430 611 301 
31-4171B 
1153000412 
NOZZLE AND HOLDER ASSY.
E120-3
Back to top