105101-4460 ZEXEL 9 430 611 270 BOSCH NOZZLE AND HOLDER ASSY. 9430611270 1051014460 6131113100


 

Information nozzle and holder assy.

BOSCH 9 430 611 270 9430611270
ZEXEL 105101-4460 1051014460
KOMATSU 6131113100 6131113100
105101-4460 NOZZLE AND HOLDER ASSY.
Rating:
22
Buy NOZZLE AND HOLDER ASSY. 105101-4460 zexel genuine, new aftermarket engine parts with delivery

Include in #1:

101402-3000 as NOZZLE AND HOLDER ASSY

Cross reference number

Zexel num
Bosch num
Firm num
Name
105101-4460 
9 430 611 270 
31-3390S 
6131113100  KOMATSU
NOZZLE AND HOLDER ASSY.
S4D105 * K




Information:


Do not use the same vacuum sampling pump for extracting oil samples that is used for extracting coolant samples.A small residue of either type sample may remain in the pump and may cause a false positive analysis for the sample being taken.Always use a separate pump for oil sampling and a separate pump for coolant sampling.Failure to do so may cause a false analysis which could lead to customer and dealer concerns.
Oil Sampling Interval
Take the oil samples as close as possible to the standard intervals. In order to receive the full value from S O S oil analysis, establish a consistent trend of data. In order to establish a pertinent history of data, perform consistent oil samplings that are evenly spaced.Recommended interval for engine oil samples is given in Table 2. A 250 hour sampling interval can provide a timely indication of oil contamination and oil degradation.Measure and record engine oil consumption in order to allow accurate oil analysis. Oil additions during the sampling interval dilute wear metals and other contaminants.
Table 2
S O S Oil Sampling Interval for Engine crankcase
Recommended Interval (1)(2) Oil Type
Every 250 Service Hours Cat DEO
Cat DEO-ULS
(1) Severe applications may require a more frequent oil sampling interval.
(2) Under certain conditions, the Cat dealer or the Operation and Maintenance Manual may allow a longer interval between oil samplings.Note: Refer to the Operation and Maintenance Manual for your engine for recommended oil drain intervals.Consult your Cat dealer for complete information and assistance in order to establish an S O S Services program for your engine.More Frequent S O S Sampling Improves Life Cycle Management
Traditionally, the suggested S O S sampling intervals for diesel engines have been at 250 hours. However in severe applications, more frequent oil sampling is recommended. Severe service for lubricated compartments occurs at high loads, in high temperatures, and in dusty conditions. If any of these conditions or other severe service indicators exist, sample the engine oil at 125 hour intervals. These additional samples will increase the chance of detecting a potential failure.Determining Optimum Oil Change Intervals
Sampling the engine oil at every 125 hours provides information for oil condition and for oil performance. This information is used to determine the optimum usable life of a particular oil. Also, more points of data will allow closer monitoring of component wear rates. Close monitoring also allows you to obtain the maximum use of the oil. For detailed information on optimizing oil change intervals, consult your Cat dealer.This Special Publication does not address recommended oil drain intervals. Refer to your engine Operation and Maintenance Manual, and consult your Cat dealer for additional guidance, including but not limited to guidance on establishing optimized and/or acceptable oil drain intervals.Note: The use of Cat S O S Services oil analysis helps environmental sustainability as the best way to optimize oil life. S O S Services will help engines reach expected life. Consult your Cat dealer regarding the testing required to establish a safe, optimized oil drain interval.Standard oil drain intervals as published

Have questions with 105101-4460?





Group cross 105101-4460 ZEXEL

9 430 611 266 
31-4140T 
 
NOZZLE AND HOLDER ASSY.

Isuzu 

9 430 611 267 
31-3420 
9153001790 
NOZZLE AND HOLDER ASSY.
D920
9 430 611 268 
31-4170 
9153001810 

E120

Nissan-Diesel 

 
1660097000 

9 430 611 269 
31-4190 
1660097001 

RD8

Komatsu 

105101-4460  
9 430 611 270 
31-3390S 
6131113100 
NOZZLE AND HOLDER ASSY.
S4D105

Isuzu 

9 430 610 164 
31-41703 
1153000080 
NOZZLE AND HOLDER ASSY.
E120
9 430 610 164 
31-41703 
1153000082 
NOZZLE AND HOLDER ASSY.
E120
 
5153000100 

4BB1
Back to top