105100-5092 ZEXEL 9 430 610 866 BOSCH NOZZLE AND HOLDER ASSY. 9430610866 1051005092 ez41056


 

Information nozzle and holder assy.

BOSCH 9 430 610 866 9430610866
ZEXEL 105100-5092 1051005092
  EZ41056
105100-5092 NOZZLE AND HOLDER ASSY.
Rating:
68
Buy NOZZLE AND HOLDER ASSY. 105100-5092 zexel genuine, new aftermarket engine parts with delivery

Include in #1:

101401-1000 as NOZZLE AND HOLDER ASSY

Cross reference number

Zexel num
Bosch num
Firm num
Name
105100-5092 
9 430 610 866 
31-38101 
EZ41056   
NOZZLE AND HOLDER ASSY.
6A K 53KB NOZZLE & HOLDER ASSY N&NH KBL-S N&NH




Information:

The problems in this section are problems that do come about and are normally called "low power". These problems are not necessarily more common than engine problems, but they are possible problems which you need to read and check before an engine is disassembled.Read all of the items but make sure the first three are checked completely before making any engine test. Possible Causes/Corrections Tachometer ErrorTo check, connect a tachometer of known accuracy to the engine. Run the engine and make a comparison of the readings of the vehicle and test tachometers. If vehicle tachometer is defective, make repairs as necessary or install a new tachometer. Engine Operated At High AltitudeLess oxygen at higher altitudes causes the engine horsepower to go down. There is no effect on the horsepower of the engine for the first 2280 m (7500 ft) above sea level of operation. Brakes Do Not Completely ReleaseCheck the brakes by feeling all the brake drums. If the brakes of a wheel do not completely release, the brake drum for that wheel will be hotter than the brake drums for the other wheels. With the truck lifted with a jack, the wheels must have free rotation when turned by hand. Extra Engine Driven EquipmentAir compressors, hydraulic pumps, alternator, and other engine driven equipment that has damage, or that was not installed correctly, or that is not in correct adjustment, can take more horsepower to drive than expected. If necessary, disconnect the equipment and test the engine. Speedometer ErrorA defective speedometer does not give the correct speed or the correct indication of fuel consumption. An indication of low speed can cause the operator to feel that he has a power problem. Speeds Too HighThe need for more horsepower is easy to see as the speed of the vehicle is increased. This is especially true if the front of the vehicle has a large surface area. Application personnel can give you the horsepower necessary for different vehicle designs at different speeds. Overload On VehicleApplication personnel can give you the horsepower needs for different vehicles. High Moving ResistanceSoft ground conditions cause a need for more horsepower. To see if the problem is the engine, test the vehicle on a surface known to be good, or test on a chassis dynamometer. High Wind ResistanceThe horsepower needs for a truck can be divided into two parts. Part of the horsepower is used to move the vehicle and part is used to get through the resistance of the wind. The horsepower necessary to get through the resistance of the wind will increase as the vehicle is used at higher speeds. Vehicles with a large front area have a higher wind resistance and take more horsepower than those with a small front area. Some types of trucks, for example those used for the transportation of automobiles and or boats have high wind resistance even if the front area is small. Moving against the wind has the same effect on wind resistance as does higher

Have questions with 105100-5092?





Group cross 105100-5092 ZEXEL

Komatsu 

9 430 610 851 
31-4360E 
6137113200 
NOZZLE AND HOLDER ASSY.
D105

Hino 

9 430 610 852 
31-4400 
236001460A 
NOZZLE AND HOLDER ASSY.
EH700
9 430 610 853 
31-4401 
236001460B 
NOZZLE AND HOLDER ASSY.
EH700

Isuzu 

9 430 610 854 
31-3660 
1153000920 
NOZZLE AND HOLDER ASSY.
6BD1
9 430 610 855 
31-3661 
1153001060 
NOZZLE AND HOLDER ASSY.
6BD1
9 430 610 856 
30-3130 
1153001061 
NOZZLE AND HOLDER ASSY.
6BD1
9 430 612 973 
30-3201 
1153001062 
NOZZLE AND HOLDER ASSY.
6BD1

Hino 

9 430 610 078 
31-5300F 
236001221A 
NOZZLE AND HOLDER ASSY.
EK100
9 430 612 972 
31-5300122 
S236001221 
NOZZLE AND HOLDER ASSY.
EK100
9 430 612 972 
31-5300122 
236001221C 
NOZZLE AND HOLDER ASSY.
EK100
9 430 610 857 
31-5370 
236001480A 
NOZZLE AND HOLDER ASSY.
EF700T

Isuzu 

 
1153000911 
NOZZLE AND HOLDER ASSY.
6BD1
9 430 610 024 
31-3681 
1153001050 
NOZZLE AND HOLDER ASSY.
6BD1
9 430 610 858 
30-3140 
1153001051 
NOZZLE AND HOLDER ASSY.
6BD1
9 430 610 859 
30-3201T 
1153001052 
NOZZLE AND HOLDER ASSY.
6BD1
9 430 610 860 
31-5380 
 

MH50

Komatsu 

9 430 610 861 
31-4410D 
6138113200 
NOZZLE AND HOLDER ASSY.
SA6D110

Kubota 

9 430 610 862 
31-3690 
1912953001 
NOZZLE AND HOLDER ASSY.
ER1700
9 430 610 862 
31-3690 
 
NOZZLE AND HOLDER ASSY.
ER1700
9 430 610 863 
31-3691Q 
1912953002 
NOZZLE AND HOLDER ASSY.
ER1700
9 430 610 864 
31-3521I 
 
NOZZLE AND HOLDER ASSY.
9 430 610 865 
31-3522I 
 
NOZZLE AND HOLDER ASSY.
105100-5092  
9 430 610 866 
31-38101 
EZ41056 
NOZZLE AND HOLDER ASSY.
6A
Back to top