Information nozzle and holder assy.
BOSCH
9 430 610 791
9430610791
ZEXEL
105100-4582
1051004582
ISUZU
5153000891
5153000891
Rating:
Include in #1:
101401-0030
as NOZZLE AND HOLDER ASSY
Cross reference number
Zexel num
Bosch num
Firm num
Name
105100-4582
5153000891 ISUZU
NOZZLE AND HOLDER ASSY.
6BD1 K 53KB NOZZLE & HOLDER ASSY N&NH KBL-S N&NH
6BD1 K 53KB NOZZLE & HOLDER ASSY N&NH KBL-S N&NH
Information:
Start By:a. remove oil pump1. Check the main bearing caps for identification for their location and direction in the block. The caps must be installed in the same location and direction from which they were removed. 2. Remove No. 2 through No. 6 bearing caps (1). Remove thrust plates from the No. 4 main bearing.
If the crankshaft is turned in the wrong direction, the tab of the bearing will be pushed between the crankshaft and cylinder block. This can cause damage to either the crankshaft or cylinder block or both.
3. Remove the upper halves of the main bearings by putting tool (A) in oil hole (2) in the crankshaft. Turn the crankshaft in the direction which will push the
If the crankshaft is turned in the wrong direction, the tab of the bearing will be pushed between the crankshaft and cylinder block. This can cause damage to either the crankshaft or cylinder block or both.
3. Remove the upper halves of the main bearings by putting tool (A) in oil hole (2) in the crankshaft. Turn the crankshaft in the direction which will push the