105088-1010 ZEXEL 9 430 616 417 BOSCH NOZZLE-HOLDER 9430616417 1050881010

Information nozzle-holder

BOSCH 9 430 616 417 9430616417

ZEXEL 105088-1010 1050881010

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy NOZZLE-HOLDER 105088-1010 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

2.	[2]	150508-5900	BEARING PIN
4.	[1]	150560-0200	SLOTTED WASHER
6.	[1]	150562-4700	COMPRESSION SPRING
12/1.	[1]	150523-6500	SHIM D11.5&4.5T0.80
12/1.	[1]	150533-5000	SHIM T1.00
12/1.	[1]	150533-5100	SHIM T1.01
12/1.	[1]	150533-5200	SHIM T1.02
12/1.	[1]	150533-5300	SHIM T1.03
12/1.	[1]	150533-5400	SHIM T1.04
12/1.	[1]	150533-5500	SHIM T1.05
12/1.	[1]	150533-5600	SHIM T1.06
12/1.	[1]	150533-5700	SHIM T1.07
12/1.	[1]	150533-5800	SHIM T1.08
12/1.	[1]	150533-5900	SHIM T1.09
12/1.	[1]	150533-6000	SHIM T1.10
12/1.	[1]	150533-6100	SHIM T1.11
12/1.	[1]	150533-6200	SHIM T1.12
12/1.	[1]	150533-6300	SHIM T1.13
12/1.	[1]	150533-6400	SHIM T1.14
12/1.	[1]	150533-6600	SHIM T1.16
12/1.	[1]	150533-6700	SHIM T1.17
12/1.	[1]	150533-6800	SHIM T1.18
12/1.	[1]	150533-6900	SHIM T1.19
12/1.	[1]	150533-7000	SHIM T1.20
12/1.	[1]	150533-7100	SHIM T1.21
12/1.	[1]	150533-7200	SHIM T1.22
12/1.	[1]	150533-7300	SHIM T1.23
12/1.	[1]	150533-7400	SHIM T1.24
12/1.	[1]	150533-7500	SHIM T1.25
12/1.	[1]	150533-7600	SHIM T1.26
12/1.	[1]	150533-7700	SHIM T1.27
12/1.	[1]	150533-7800	SHIM T1.28
12/1.	[1]	150533-7900	SHIM T1.29
12/1.	[1]	150533-8000	SHIM T1.30
12/1.	[1]	150533-8100	SHIM T1.31
12/1.	[1]	150533-8200	SHIM T1.32
12/1.	[1]	150533-8300	SHIM T1.33
12/1.	[1]	150533-8400	SHIM T1.34
12/1.	[1]	150533-8500	SHIM T1.35
12/1.	[1]	150533-8600	SHIM T1.36
12/1.	[1]	150533-8700	SHIM T1.37
12/1.	[1]	150533-8800	SHIM T1.38
12/1.	[1]	150533-8900	SHIM T1.39
12/1.	[1]	150533-9000	SHIM T1.40
12/1.	[1]	150533-9100	SHIM T1.41
12/1.	[1]	150533-9200	SHIM T1.42
12/1.	[1]	150533-9300	SHIM T1.43
12/1.	[1]	150533-9400	SHIM T1.44
12/1.	[1]	150533-9500	SHIM T1.45
12/1.	[1]	150533-9600	SHIM T1.46
12/1.	[1]	150533-9700	SHIM T1.47
12/1.	[1]	150533-9800	SHIM T1.48
12/1.	[1]	150533-9900	SHIM T1.49
12/1.	[1]	150534-0000	SHIM T1.50
12/1.	[1]	150534-0100	SHIM T1.51
12/1.	[1]	150534-0200	SHIM T1.52
12/1.	[1]	150534-0300	SHIM T1.53
12/1.	[1]	150534-0400	SHIM T1.54
12/1.	[1]	150534-0500	SHIM T1.55
12/1.	[1]	150534-0600	SHIM T1.56
12/1.	[1]	150534-0700	SHIM T1.57
12/1.	[1]	150534-0800	SHIM T1.58
12/1.	[1]	150534-0900	SHIM T1.59
12/1.	[1]	150534-1000	SHIM T1.60
12/1.	[1]	150534-1100	SHIM T1.61
12/1.	[1]	150534-1200	SHIM T1.62
12/1.	[1]	150534-1300	SHIM T1.63
12/1.	[1]	150534-1400	SHIM T1.64
12/1.	[1]	150534-1500	SHIM T1.65
12/1.	[1]	150534-1600	SHIM T1.66
12/1.	[1]	150534-1700	SHIM T1.67
12/1.	[1]	150534-1800	SHIM T1.68
12/1.	[1]	150534-1900	SHIM T1.69
12/1.	[1]	150534-2000	SHIM T1.70
12/1.	[1]	150534-2100	SHIM T1.71
12/1.	[1]	150534-2200	SHIM T1.72
12/1.	[1]	150534-2300	SHIM T1.73
12/1.	[1]	150534-2400	SHIM T1.74
12/1.	[1]	150534-2500	SHIM T1.75
13.	[1]	150524-4700	SPACER BUSHING
20.	[1]	150655-0400	NOZZLE-RETAINING NUT
32.	[1]	150622-3900	SETTING DEVICE
34.	[1]	150623-4800	GASKET
36.	[1]	150621-0400	UNION NUT

Include in #2:

104740-1180 as NOZZLE-HOLDER

Cross reference number

Zexel num

Bosch num

Firm num

Name

105088-1010
105088-1030

9 430 616 417

NOZZLE-HOLDER
* K

Information:

ELC cooling systems can withstand contamination of up to ten percent of conventional HD coolant/antifreeze. If the contamination exceeds ten percent of the total system capacity, perform either one of the following two procedures:* Drain the cooling system. Flush the system with clean water. Refill the system with ELC.* Maintain the cooling system as if the system is filled with conventional HD coolant/antifreeze.Commercial Extended Life Coolant
If Caterpillar extended life coolant is not used, select a commercial extended life coolant that meets the Caterpillar EC-1 specification. Do not use a product that is labeled as an extended life coolant but does not meet the Caterpillar EC-1 specification. Follow the coolant maintenance guidelines of the commercial extended life coolant supplier. In all cases, use distilled or deionized water or use water that has the properties listed in the Caterpillar Water Quality Limits chart.Caterpillar Diesel Engine Antifreeze/Coolant (DEAC)
For cooling systems using conventional HD coolant, Caterpillar recommends the use of Caterpillar Diesel Engine Antifreeze/Coolant (DEAC). DEAC is an alkaline type, single-phase, ethylene glycol-based antifreeze/coolant. DEAC contains inorganic corrosion inhibitors and anti-foaming agents.Contact your Caterpillar dealer for part numbers and available container sizes.Caterpillar DEAC is available premixed with distilled water in a 50/50 concentration. If DEAC concentrate is used, Caterpillar recommends mixing the concentrate with distilled or deionized water. If distilled or deionized water is not available, use water that has the properties listed in the Caterpillar Water Quality Limits chart.Caterpillar Supplemental Coolant Additive (SCA)
Caterpillar Supplemental Coolant Additive (SCA) is effective in preventing corrosion on all metals. Caterpillar SCA also prevents the formation of mineral deposits, prevents liner cavitation, and eliminates coolant foaming.Caterpillar DEAC is formulated with the correct level of Caterpillar SCA. Additional SCA is NOT needed when the cooling system is initially filled with DEAC.Contact your Caterpillar dealer for part numbers and available container sizes.Commercial Heavy Duty (HD) Coolant/Antifreeze and SCA
If Caterpillar DEAC is not used, select a low silicate commercial HD coolant/antifreeze that meets ASTM D5345 or D4985 specifications.When a commercial HD coolant/antifreeze is used, the cooling system should be treated with three to six percent Caterpillar SCA by volume. Refer to the Caterpillar SCA Requirements for Heavy Duty Coolant/Antifreeze chart. If Caterpillar SCA is not used, select a commercial SCA. The commercial SCA must provide a minimum of 1200 mg/L or 1200 ppm (70 grains/US gal) nitrites in the final coolant mixture. Follow the coolant maintenance guidelines of the commercial SCA supplier.HD coolant/antifreezes that meet ASTM D5345 or D4985 specifications DO require SCA treatment at initial fill, and on a maintenance basis.When mixing concentrated coolants, use distilled or deionized water or use water that has the properties listed in the Caterpillar Water Quality Limits chart.Heavy Duty Coolant/Antifreeze Cooling System Maintenance
Never operate an engine without thermostats in the cooling system. Thermostats maintain the engine coolant at the proper operating temperature. Cooling system problems can develop without thermostats.
Check the coolant/antifreeze solution (glycol content) frequently to ensure adequate anti-boil and anti-freeze protection. Caterpillar recommends the use of a refractometer for checking the