105081-2140 ZEXEL 9 430 615 148 BOSCH NOZZLE-HOLDER 9430615148 1050812140 3116118100


 

Information nozzle-holder

BOSCH 9 430 615 148 9430615148
ZEXEL 105081-2140 1050812140
MITSUBISHI 3116118100 3116118100
105081-2140 NOZZLE-HOLDER
Rating:
60
Buy NOZZLE-HOLDER 105081-2140 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

4. [1] 150510-8500 STOP PIN
6. [1] 150562-3100 COMPRESSION SPRING
8. [1] 150518-5400 THREADED PIN
10. [1] 150520-4700 CAP NUT
11. [1] 029331-4130 GASKET
20. [1] 150601-8400 NOZZLE-RETAINING NUT
27. [1] 150613-1700 EYE BOLT
28. [2] 026508-1240 GASKET D11.9&8.2T1

Cross reference number

Zexel num
Bosch num
Firm num
Name
105081-2140 
9 430 615 148 
3116118100  MITSUBISHI
NOZZLE-HOLDER
K 53LZ NOZZLE HOLDER NH NH




Information:

Burn Prevention
Do not touch any part of an operating engine. Allow the engine to cool before any repair or maintenance is performed on the engine.Relieve all pressure in air, oil, fuel or cooling systems before any lines, fittings or related items are disconnected or removed.Coolant
To prevent personal injury, do not step up on engine/vehicle to remove the filler cap, if applicable. Use an adequate ladder.At operating temperature, the engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot water. When pressure is relieved rapidly, this hot water can turn into steam.Allow cooling system components to cool before draining. Any contact with hot water or steam can cause severe burns.Check the coolant level only after the engine has been stopped and the filler cap is cool enough to remove with your bare hand.Remove the cooling system filler cap slowly to relieve pressure.Liquid cooling system supplemental additive contains alkali. To prevent personal injury, avoid contact with the skin and eyes and do not drink.Oils
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact the skin.Batteries
Battery electrolyte contains acid and can cause injury. Avoid contact with the skin and eyes.Wash hands after touching batteries and connectors. Use of gloves is recommended.Batteries give off flammable fumes which can explode.Always thaw a frozen battery before jump starting. Frozen batteries can explode.Do not smoke when observing the battery electrolyte levels.Always wear protective glasses when working with batteries.Fire or Explosion Prevention
Determine whether the engine will be operated in an environment in which combustible gases could be drawn through the air inlet system. These gases could cause the engine to overspeed, which in turn could seriously damage the engine and result in bodily injury or property damage.If your application involves the presence of combustible gases, consult Caterpillar to obtain additional information concerning protection devices suitable for the application involved.Inhaling freon gas through a lit cigarette or other smoking method, or inhaling fumes released from a flame contacting freon could cause bodily harm or death. Do not smoke when servicing, charging or working around air conditioners or where freon gas may be present.All fuels, most lubricants and some coolant mixtures are flammable.Diesel fuel is flammable. Gasoline is flammable. The mixture of diesel and gasoline fumes are extremely explosive.Do not smoke while refueling or in a refueling area.Always thaw a frozen battery before jump starting. Frozen batteries can explode.Do not smoke in areas where batteries are charged, or where flammable materials are stored.Batteries give off flammable fumes which can explode.Keep all fuels and lubricants stored in properly marked containers and away from all unauthorized persons.Store all oily rags or other flammable material in a protective container, in a safe place.Do not weld or flame cut on pipes or tubes that contain flammable fluids. Clean them thoroughly with nonflammable solvent before welding or flame cutting on them.Remove all flammable materials such as fuel, oil and other debris before they accumulate on the truck/vehicle

Have questions with 105081-2140?





Group cross 105081-2140 ZEXEL

Hino 

 
6304173000 

9 430 615 658 
236201170A 
NOZZLE-HOLDER
9 430 615 658 
236301130A 
NOZZLE-HOLDER
9 430 615 658 
236201420A 
NOZZLE-HOLDER

Daihatsu 

9 430 615 511 
P146400090Z 
NOZZLE-HOLDER

Mitsubishi 

105081-2140  
9 430 615 148 
3116118100 
NOZZLE-HOLDER
9 430 615 279 
ME046002 
NOZZLE-HOLDER

Hino 

9 430 615 659 
6302170500 
NOZZLE-HOLDER

Komatsu 

9 430 615 660 
6142123110 
NOZZLE-HOLDER
Back to top